CJ-SMF Industrial Electronic Co. Ltd-HNST

Series image: for reference only

Manufacturer：	CJ
Product Series：	CJ-SMF
Product Type：	TVS Diodes
EU RoHS：	Compliant(2011/65/EU)
EU REACH：	Dose not contain REACH SVHC(1907/2006/EC)
	View more
	Retract

Data Sheet：

SMF5.0CA_SOD-123FL

Export Page to PDF

Specification

Reset

UNI TVS Diodes ,200W ,VRWM(V):5V ,VC@IPP:9.2V ,IPP-21.7A ,IR:800μA ,SOD-123FL - SMF5.0A
BI TVS Diodes ,200W ,VRWM(V):5V ,VC@IPP:9.2V ,IPP-21.7A ,IR:800μA ,SOD-123FL - SMF5.0CA

Is a ceramic tube fuse a high breaking fuse? Ceramic tube fuses are usually classified as high breaking capacity fuses, and one of their design goals is to safely cut off high current faults. The following is a specific analysis:
What is a ceramic tube fuse? Ceramic tube fuse is a very common overcurrent protection device, and its core structure is a tubular shell made of ceramic material, which encapsulates the fuse element (fuse) inside.
Under what circumstances should I choose a slow break fuse? The selection of slow break (delay type) fuses is mainly to deal with situations where there is a transient surge current in the circuit that is significantly higher than the normal operating current. These surge currents are usually normal phenomena during equipment startup or operation, rather than fault currents. If a fast break fuse is used, it may melt under these normal surge impacts, causing the device to fail to start properly or frequently malfunction.
Under what circumstances do fuses choose to break quickly? The selection of fast breaking (fast melting) fuses is mainly for situations where extremely fast response to overcurrent (especially short-circuit current) is required to protect devices or equipment that are highly sensitive to current surges. The following are specific applicable scenarios:
What is the difference between fast and slow breaking of fuses? The main difference between FastActing and TimeDelay/SlowBlow of fuses is their response speed to overload current and surge current, which determines their respective application scenarios.
What is fuse arc extinguishing? Fuse arc extinguishing refers to the ability of a fuse to safely and quickly extinguish the arc generated during the process of melting (the melt melts due to overcurrent). This is the core function of fuses to reliably cut off fault currents and protect circuits.
Does a blown fuse mean cutting off the power supply? Does a blown fuse mean cutting off the power supply? Comprehensive analysis and special case explanation
What are the certification standards for fuses? The certification execution standard system for fuses is diversified according to different application fields and regional market requirements, mainly covering scenarios such as automotive electronics, intrinsic safety equipment, general electronics, and specific industry applications. The following is a classification analysis and key points of the core certification standards:
Why are all fuses UL certified? You said 'all fuses have UL certification', which is not entirely accurate, but it does reflect the extremely important position and high popularity of UL certification in the fuse field. The reasons are as follows:
How to reduce the risk of fuse failure? The core of reducing the risk of fuse failure lies in correct selection, standardized installation, use of qualified products, consideration of environmental factors, and regular maintenance. The following are specific strategies:
What are the consequences of fuse failure? Fuse failure is mainly divided into two completely different situations, each of which leads to completely different consequences and is very serious:
Will the fuse fail? Yes, fuses do indeed fail. Although they are designed as reliable and predictable fuse elements, in some cases they may not function as expected, resulting in failure.
What are the classifications of surface mount capacitors? There are many types of SMD capacitors, which can be classified in various ways. The following are several main classification perspectives and their common types:
Why is it that when the capacitance value of a surface mount capacitor exceeds 1UF, the direct testing results in a lower capacitance? The phenomenon of low capacitance of surface mount capacitors (especially MLCC) when tested directly with a capacity of over 1uF is usually caused by the following key factors:
What is the storage time of capacitors The storage time of capacitors is significantly affected by the type, storage conditions, and packaging process, with significant differences among different types. The following is a storage guide that integrates the characteristics of various capacitors:
How to prevent capacitor breakage during production? Capacitor breakage is a common problem in electronic production, especially in ceramic capacitors (MLCC), which can lead to early product failure or reduced reliability. Preventing and controlling capacitor breakage requires comprehensive management from multiple aspects such as design, materials, processes, equipment, operation, and environment. Here are some key prevention and control measures:
Why are surface mount capacitors prone to breakage or terminal detachment? Surface mount capacitors (especially multi-layer ceramic capacitors - MLCC) are prone to breakage or terminal detachment, mainly due to their own structure, material properties, and the combined effect of external stress. The following are the main reasons:
Do capacitors have polarity? Capacitors can have polarity or not, depending on the type and internal structure of the capacitor.
What are the intuitive manifestations of capacitor failure? The intuitive manifestations of capacitor failure are diverse, depending on the type of capacitor, its role in the circuit, and the severity of the failure. Here are some of the most common intuitive expressions that can be discovered through observation or simple operation:
How to remedy a capacitor failure? After discovering a capacitor failure, the core remedial measure is to replace the faulty capacitor. This is a process that requires careful handling, especially when dealing with high voltage or precision equipment.
What are the effects of capacitor failure on the circuit? The impact of capacitor failure on circuits is extensive and severe, depending on the role of the capacitor in the circuit, failure modes (open circuit, short circuit, reduced capacity, increased ESR, increased leakage current, etc.), and the design of the circuit itself. Here are some of the main impacts:
What are the reasons for capacitor failure? There are various reasons for capacitor failure, which can be mainly attributed to the following categories:
What rules should be followed for capacitor selection? Capacitor selection is a crucial step in circuit design, as improper selection may lead to poor circuit performance, decreased reliability, or even failure. The following are the key rules and considerations that need to be followed:
What are the consequences of resistor failure? The consequences of resistor failure are diverse, depending on the function of the resistor in the circuit, failure mode, circuit design, and severity of the failure. The following are some of the main consequences, ranging from minor functional abnormalities to severe equipment damage and even safety hazards:
What are the manifestations of resistor failure? The performance of surface mount resistors after failure is diverse, depending on the root cause of the failure. The following are common failure manifestations and their corresponding possible causes:
What are the methods to prevent resistor failure? Preventing resistor failure is a crucial step in ensuring the reliable operation of electronic devices. Here are some systematic methods and strategies, starting from design selection, production process, to usage and maintenance:
What are the reasons for resistance aging? There are various reasons for resistor failure, which can be summarized into the following main categories:
Where is the way out for component agents? Under the multiple challenges of payment term pressure, spot price fluctuations, and original factory order grabbing, electronic component agents can build core competitiveness and achieve sustainable development through the following strategies:
Where is the way out for component stores in the current environment? In the current market environment, the key directions for electronic component stores can be summarized as follows:
What are the advantages of purchasing electronic components in Huanian Mall In the Chinese New Year Shopping Mall (website: [www.hnsts hop. com])（ http://www.hnstshop.com ））Purchasing electronic components can bring the following core advantages to engineers, R&D teams, and enterprise users, taking into account their product, service, technical support, and supply chain capabilities. The specific benefits are as follows: