HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

ever ohms walter current diverter SMD fuse Alloy resistance Precision resistor fuse

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

MBR0580,CJ,Schottky Diodes

MBR0580

Schottky Diodes ,MBR0580 ,VR:20V ,IO:500mA ,VF:0.8V ,PD:250mW ,SOD-123

✖

The image is for reference only, please refer to the drawing for details

Product number：	DK-K21620V0A500140503CJ
Manufacturer Product Number：	MBR0580
Manufacturer ：	CJ
Series ：	CJ-Schottky Diodes
Product Type ：	Schottky Diodes
Voltage(VR) ：	20V
Current (IO) ：	500mA
Forward Voltage(VF) ：	0.8V
Power dissipation(Pd）：	250mW
Packge ：	SOD-123
Description：	Schottky Diodes ,MBR0580 ,VR:20V ,IO:500mA ,VF:0.8V ,PD:250mW ,SOD-123

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-Schottky Diodes
Product Type	Schottky Diodes
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-09-14

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

SiC MOS driver design SiC MOS driver design is a complex process that requires consideration of many factors, such as electrical performance, thermal characteristics, and packaging selection. To improve reliability and performance, the following aspects should be considered:

Circuit symbols for silicon carbide (SIC) MOSFETs The circuit symbol of silicon carbide (SiC) MOSFET is similar to that of traditional silicon MOSFET, except that some special markings are added to the symbol to indicate its characteristics.

What is SiC MOSFET? SIC MOSFET (Silicon Carbide MOSFET) is a new type of semiconductor device with high thermal stability, high conductivity, and high frequency characteristics. Learning SIC MOSFET includes the following aspects:

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

Silicon carbide diodes: an important role in the photovoltaic industry Silicon carbide (SiC) diodes have high stability and efficiency, making them suitable for various photovoltaic applications such as solar panels and solar systems. For example, in solar panels, silicon carbide diodes can prevent excessive current or overvoltage, thereby protecting solar cell components. In solar energy systems, it can also limit the charging current and control the charging and discharging process of the battery.

What are the measures for surge suppression? The reasons for generating surges are multifaceted, and surges are a type of spike pulse with high rising speed and short duration. Overvoltage in the power grid, switch ignition, reverse voltage, static electricity, and motor/power supply noise are all factors that cause surges. And surge protectors provide a simple, economical, and reliable protection method for power surge protection of electronic devices.

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

The main six stages of SiC chip manufacturing The main six specific processes of SiC chip manufacturing are pre-processing, wafer processing, crystal growth, integrated circuit design and fabrication, chip testing, and integration.

What are the differences between MOSFET and SBD? MOSFET and SBD are two different types of semiconductor devices, with the main differences as follows: 1. Different working principles, 2. Different conduction characteristics, and 3. Different costs and complexities.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}