SMF5914A_CJ_Zener Diodes_SMF5914A_3.6V_Parameters_ Price

SMF5914A,CJ,Zener Diodes

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	SMF59
Product Type	Zener Diodes
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)
Power Dissipatoin(PD)	1.5W
Reverse Zener Voltage(VZ)	3.3V~200V
Forward Voltage(VF)	1.5V
Package	SOD-123FL
SPQ	3000PCS
Operation Junction and Storage Temperature Range	-55 ~ +150℃

Attribute Name

Attribute Value

Manufacturer

Product Series

SMF59

Product Type

Zener Diodes

EU RoHS

Compliant(2011/65/EU)

EU REACH

Dose not contain REACH SVHC(1907/2006/EC)

Power Dissipatoin(PD)

1.5W

Reverse Zener Voltage(VZ)

3.3V~200V

Forward Voltage(VF)

1.5V

Package

SOD-123FL

SPQ

3000PCS

Operation Junction and Storage Temperature Range

-55 ~ +150℃

File Type	File Name
Data Sheet	SMF59.pdf

File Type

File Name

Data Sheet

SMF59.pdf

Product Recommendation Maker Dynamics Applications

Introduction to Low Sensitivity SiC Power Modules Low inductance SiC power module refers to a power module that uses silicon carbide (SiC) as a semiconductor material and has a lower inductance value. Compared with traditional silicon (Si) power modules, low inductance SiC power modules have higher switching speed and lower switching losses, thereby improving the efficiency and reliability of the system.

The requirements for the driver board of SiC silicon carbide MOS dual pulse testing equipment are as follows: The requirements for the driver board of SiC silicon carbide MOS dual pulse testing equipment are as follows:

Application of Silicon Carbide (SiC) Ceramics in Semiconductors Silicon carbide (SiC) ceramics are a semiconductor material widely used in many semiconductor applications. Here are some typical applications of silicon carbide ceramic semiconductors:

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

What are the differences between MOSFET and SBD? MOSFET and SBD are two different types of semiconductor devices, with the main differences as follows: 1. Different working principles, 2. Different conduction characteristics, and 3. Different costs and complexities.

What are the solutions to reduce losses in SiC modules? The SiC module loss reduction scheme mainly considers the following four aspects: adopting low voltage and low frequency design, optimizing the driver program, optimizing the structural design, and adopting low side resonance technology.

What is SiC MOSFET? SIC MOSFET (Silicon Carbide MOSFET) is a new type of semiconductor device with high thermal stability, high conductivity, and high frequency characteristics. Learning SIC MOSFET includes the following aspects:

What are the measures for surge suppression? The reasons for generating surges are multifaceted, and surges are a type of spike pulse with high rising speed and short duration. Overvoltage in the power grid, switch ignition, reverse voltage, static electricity, and motor/power supply noise are all factors that cause surges. And surge protectors provide a simple, economical, and reliable protection method for power surge protection of electronic devices.

What are the differences between SiC SBD and SiC MOSFET? SiC SBD and SiC MOSFET are chips made of polarized silicon carbide material, which have high heat dissipation and conductivity. The difference lies in:

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

Product number：	DZ-ZC59143V6041V504CJ
Manufacturer Product Number：	SMF5914A
Manufacturer ：	CJ
Series ：	CJ-SMF59
Product Type ：	Zener Diodes
Part Number ：	SMF5914A
Reverse Zener Voltage(VZ) ：	3.6V
Power dissipation (PD) ：	1.5W
Forward Voltage(VF) ：	1.5V
Package ：	SOD-123FL
Description：	Zener Diodes ,3.6V ,1.5W ,VF:1.5V ,SOD123FL

SMF5914A,CJ,Zener Diodes

SMF5914A

Series Introduce Find Similar

Series Introduce Find Similar

File

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

{{ isChinese?level2Category.viewNameCn:level2Category.viewNameEn }}

SMF5914A,CJ,Zener Diodes

SMF5914A

Series Introduce Find Similar

Series Introduce Find Similar

File

Related Series

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications