WL211A,WALTER,Fuseholders& Accessories

Product Recommendation Maker Dynamics Applications

• 

  JZ-WL-210A0DZ000F

  Fuseholders& Accessories ,Ø5.2mm ,WALTER-WL-210A ,-

  $0.023151 More

• 

  CLIPXXWL211ATG

  Fuseholders& Accessories ,Ø6mm ,- ,- ,- ,-

  $0.000000 More

• 

  CLIPXXWL216MTG

  Fuseholders& Accessories ,Ø10mm ,- ,- ,- ,-

  $0.000000 More

• 

  WL52H

  Fuseholders& Accessories ,10*38mm ,- ,- ,- ,- ,WALTER-WL-52H ,-

  $1.142308 More

• 

  LS-502

  Fuseholders& Accessories ,5*20

  $0.000000 More

• 

  LS-1038

  Fuseholders& Accessories ,10*38mm ,- ,- ,- ,-

  $0.000000 More

• 

  LS-601

  Fuseholders& Accessories ,6*30mm

  $0.000000 More

• 

  LH1038-1

  Fuseholders ,80*18mm ,

  $1.590275 More

Product Recommendation Maker Dynamics Applications

• Introduction to SMD fuse 1206T slow break series Hnstshop Mall will comprehensively introduce the Huadduce the selection parameters and electrical performance of the 1206T slow break series SMD fuse.

• Suzhou Walter Electronics' latest price increase notice 2026 version Suzhou Walter Electronics Co., Ltd. was established in 2000 and is a brand manufacturer of fuses, resistors, leakage current sensors, NTC thermistors, and other products. Due to the sharp increase in raw material prices, we hereby raise the prices.

• ESR bare copper shunt resistor product with increased power and new product ESR bare copper shunt resistors are mainly characterized by low resistance, high power, and low temperature drift, and are widely used in current sampling circuits. In current sampling circuits, the stability requirements for resistors are extremely strict. Therefore, different product materials have different product characteristics and application markets. With the market demand for product miniaturization, low power consumption, and fast charging and discharging, ELLON has launched a small volume high-power bare copper shunt resistor. This article provides a detailed introduction to the corresponding specification parameters.

• What is long electrode resistance? What are the characteristics Long electrode patch resistor is a special structure of patch resistor. By using side electrodes as solder pads, the contact area between the solder pads and the PCB is increased, resulting in better heat dissipation and high current. It has excellent stability and impact resistance during use. Long electrode surface mount resistors are divided into metal foil long electrode surface mount resistors, also known as alloy resistors, and wide electrode surface mount resistors in later processes. Their main advantage is their strong impact resistance.

• Introduction to NANO Chip Fuse 6125SF Quick Break Type NANO chip fuse 6125SF fast break type is a high current fast break product belonging to Huade Walter Electronics. NANO patch fuse is a type of miniaturized fuse that can greatly save product space and has stable electrical performance, making it very suitable for mass production of products. NANO patch fuses can also be divided into fast break and slow break types. Today, we will introduce Huade Walter Electronics' NANO patch fuse 6125SF fast break series.

• A detailed introduction to the SMR series of Sart pure metal alloy resistors The Sart pure metal alloy resistance SMR series uses plastic sealing technology, also known as plastic sealing alloy resistance. The main characteristics of the Sart pure metal alloy resistance SMR series are as follows: 1. High power under the same reference range (up to 3W), 2. Complete resistance values (1m Ω~500m Ω), 3. High precision, with a maximum accuracy of 0.5%. This article provides a detailed introduction to the selection parameters of the Sart pure metal alloy resistance SMR series.

• What are the advantages and disadvantages of wide electrode resistors? Wide electrode patch resistors (long electrode resistors) have the following characteristics: good stability, strong current carrying capacity, and good heat dissipation performance.

• Introduction to Walter Small Volume Alloy Resistor MSTC Series The Walter electronic ultra-thin long electrode alloy resistance MHTC series adopts the FR4 process. The Walter electronic chip long electrode alloy resistance MHTC series mainly includes 0805 and 1206 volumes, ultra-low resistance alloy resistance, and ultra-thin materials suitable for mobile phones, tablets, Bluetooth and other products. Below is an explanation of the parameters of the Walter small volume alloy resistance MHTC series.

• Introduction to the SME series of Sart wide electrode current detection resistors The Sart wide electrode current detection resistor SME series uses a metal foil ceramic process, and its main material is a strong copper alloy, so it is also known as a wide electrode alloy resistor. The SME series has ultra-high power and thermal conductivity, and long-term reliability. This article provides a detailed introduction to the main characteristics and selection parameters of Sart wide electrode current detection resistors.

• The basic principle and function of current sensing resistor This article introduces the basic principle and function of current sensing resistor, and will explain the current sensing resistor from three aspects: definition, function, and selection. Current sensing resistor is a special type of resistor used to measure the current in a circuit. Its working principle is based on Ohm's law, that is, current is equal to voltage divided by resistance. By connecting a current sensing resistor in a circuit, we can indirectly measure the magnitude of the current by measuring the voltage passing through it.

Product Recommendation Maker Dynamics Applications

• Suzhou Walter Electronics' latest price increase notice 2026 version Suzhou Walter Electronics Co., Ltd. was established in 2000 and is a brand manufacturer of fuses, resistors, leakage current sensors, NTC thermistors, and other products. Due to the sharp increase in raw material prices, we hereby raise the prices.

• WALTER Alloy Resistors: MHTC1206 Series Current Sensing Resistors Product Introduction The MHTC1206 Series Current Sensing Resistors are high-precision electronic components designed with a metal strip structure. Featuring long electrodes, two terminals, and no side electrodes, they have a size specification of 0.12×0.06 inches, specifically engineered for accurate current detection scenarios. Adopting MnCu alloy as the core material and advanced manufacturing processes, this series offers outstanding advantages such as low resistance, high precision, and high reliability, making it widely applicable in various electronic devices and circuit systems that require precise current monitoring.

• WALTER Alloy Resistors: PMSH1206 Series Current Sensing Resistors Product Details The PMSH1206-Series is a high-performance Metal Strip Current Sensing Resistor designed with a compact structure and reliable performance. It features short electrodes, two terminals, and is made of pure metal, with a standard size of 0.12×0.06 inches. This series is engineered to meet the precise current sensing needs of various electronic devices, offering excellent electrical characteristics and strong environmental adaptability. Whether in industrial control systems, automotive electronics, or consumer electronic products, the PMSH1206-Series delivers stable and accurate current measurement support.

• WALTER STE-M-2010 Metal Foil Current Sensing Resistor Product Introduction The STE-M-2010 is a high-performance metal foil current sensing resistor belonging to the STE-M-series, specifically engineered for precise current detection in a wide range of electronic applications. Crafted with premium materials and advanced manufacturing techniques, this resistor delivers exceptional electrical stability, reliable performance, and excellent environmental adaptability. It adheres to strict quality standards, making it an ideal choice for scenarios that demand accurate current measurement and stable operation under various working conditions.

• Product Discontinuation Notice current fuses and thermal fuses have been designated for discontinuation.

• Suzhou Walter launches new alloy resistor PMSB/PMSH series Suzhou Walter Electronics has launched a new series of pure metal alloy surface mount resistors PMSB/PMSH, with theme volumes of 1206 and 2512, using two materials: manganese copper (MuCu) and Kama. The products have high resistance to surge impact and low parasitic inductance, and are widely used in various power management systems and control systems.

• MTT-T20A adds CQC safety certification, part number, silk screen and packaging change notification MTT-20A ceramic tube fuse has added CQC safety certification. The original product code MTT-T20A0V2T202300BG has been changed to MTT-T20A0V2T202300BM1G. The body has been added with CQC silk screen printing, and the outer packaging box has been added with CQC identification.

• Introduction to the Huade Resistance Series and Product Application Fields Founded in Suzhou in 2000, Walder Electronics has developed a large number of alloy resistors that meet market demands in response to changes in the market. Below is an explanation of the parameters of different series of Walter alloy resistors, hoping to help engineers choose.