HNST WELCOME！ 0755-23173910

English /中文

Search

fuse walter ever ohms Precision resistor SMD fuse current diverter Alloy resistance

Cart 0

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

LM317,CJ,Reference Power Supply

LM317

Reference Power Supply LM317 PD:1000mW IO:1500mA VImax:40V SOT-223

✖

The image is for reference only, please refer to the drawing for details

Data Sheet： LM317.pdf

Product number：	IC07-LM317-SOT223CJ
Manufacturer Product Number：	LM317
Manufacturer ：	CJ
Series ：	CJ-Reference Power Supply
Product Type ：	Reference Power Supply
Package ：	SOT-223
Part Number ：	LM317
Power dissipation(Pd）：	PD:1000mW
Average rectified output current （Io) ：	IO:1500mA(1.5A)
Voltage(VR) ：	40V
Description：	Reference Power Supply LM317 PD:1000mW IO:1500mA VImax:40V SOT-223

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-Reference Power Supply
Product Type	Reference Power Supply
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

File

File Type	File Name
Data Sheet	LM317.pdf

Lead time： Estimated delivery date 2025-04-25

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

5 important techniques for selecting gallium nitride (SiC) MOSFETs To prove that your choice of SiC as the preferred power semiconductor for switch mode design is correct, please consider the following prominent features. Compared to standard or super junction MOSFETs or even IGBTs, SiC devices can operate at higher voltages, frequencies, and temperatures. Most of the power loss of other devices does not exist in SiC devices, so the efficiency of SiC devices can reach over 90% in most applications. Initially, SiC devices were more expensive than other MOSFETs or IGBTs.

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

What are the solutions to reduce losses in SiC modules? The SiC module loss reduction scheme mainly considers the following four aspects: adopting low voltage and low frequency design, optimizing the driver program, optimizing the structural design, and adopting low side resonance technology.

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

What is SiC MOSFET? SIC MOSFET (Silicon Carbide MOSFET) is a new type of semiconductor device with high thermal stability, high conductivity, and high frequency characteristics. Learning SIC MOSFET includes the following aspects:

Why is the development of high-voltage SiC MOSFET devices slow High voltage SiC MOSFET devices have many advantages, such as low on resistance, high temperature performance, and high-frequency characteristics, and therefore have broad prospects in some applications, such as electric vehicles, power electronic converters, and solar inverters. However, the development of these devices has been relatively slow, possibly due to the following reasons:

Prospect sharing of silicon carbide (SiC) substrate sheets Silicon carbide (SiC) substrate is one of the key materials for manufacturing SiC devices, which can provide high lattice matching, low defect density, and high-quality surface flatness. With the continuous expansion of the silicon carbide power device market, silicon carbide substrate sheets have also been widely used and are expected to continue to maintain rapid growth in the coming years.

Silicon carbide diodes: an important role in the photovoltaic industry Silicon carbide (SiC) diodes have high stability and efficiency, making them suitable for various photovoltaic applications such as solar panels and solar systems. For example, in solar panels, silicon carbide diodes can prevent excessive current or overvoltage, thereby protecting solar cell components. In solar energy systems, it can also limit the charging current and control the charging and discharging process of the battery.

What are the differences between gallium nitride (GaN) and silicon carbide (SiC)? Gallium nitride (GaN) and silicon carbide (SiC) power transistors, two types of compound semiconductor devices, have emerged as solutions. These devices compete with long-life silicon power lateral diffusion metal oxide semiconductor (LDMOS) MOSFETs and super junction MOSFETs. GaN and SiC devices are similar in some aspects, but there are also significant differences.

Product Recommendation Maker Dynamics Applications