HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

Alloy resistance SMD fuse fuse Precision resistor ever ohms current diverter walter

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CB2012T4R7M,TAIYOU,Wire Wound Chip Inductors

CB2012T4R7M

Wire Wound Chip Inductors ,0805(2.0*1.2mm) ,4.7uH ,±20% ,300mA ,Chip SMD ,TAIYOU-QN/QPN/CB

✖

The image is for reference only, please refer to the drawing for details

Data Sheet： LSQ02_LSQN-LSQPA-CB.pdf

Product number：	L01-0805-4R7MA300SCB
Manufacturer Product Number：	CB2012T4R7M
Manufacturer ：	TAIYOU
Series ：	TAIYOU-QN/QPN/CB
Type ：	Wire Wound Chip Inductors
Size ：	0805
Value ：	4.7uH
Tolerance ：	±20%
Rated Current ：	0.3A
DC resistance ：	0.52R
Description：	Wire Wound Chip Inductors ,0805(2.0*1.2mm) ,4.7uH ,±20% ,300mA ,Chip SMD ,TAIYOU-QN/QPN/CB

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	TAIYOU
Product Series	TAIYOU-QN/QPN/CB
Product Type	Wire Wound Chip Inductors
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name
Data Sheet	LSQ02_LSQN-LSQPA-CB.pdf

Lead time： Estimated delivery date when out of stock 2026-03-04

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Murata will achieve mass production of 2016 DFE2MCPHR33MJLLQ and DFE2MCPHR47MJLLQ metal power inductors Murata commercialized metal power inductors for automotive use, which are 2016 in size, have ultra-high industry standards for low DC resistance, support high current and high voltage resistance. Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed a new series of car mounted power inductors (1) "DFE2MCPH_JL (DFE2MCPHR33MJLLQ, DFE2MCPHR47MJLLQ) series" using wire wound metal alloys (hereinafter referred to as "this product"). It is a small car mounted power inductor with a size of 2016 (2.0x1.6mm), which not only achieves high voltage resistance of 40V, but also achieves industry ultra-high level (2) DC resistance and rated current. Mass production will begin in January 2024.

0.1uF (100nF) capacitors may not necessarily be suitable for filtering circuits Filter capacitors play a very important role in switching power supplies, and how to correctly select filter capacitors, especially the selection of output filter capacitors, is a concern for every engineering and technical personnel. On the power filtering circuit, we can see various capacitors with different capacitance values, such as 100uF, 10uF, 100nF, 10nF, etc. How are these parameters determined? In the future, don't see capacitors with 0.1uF capacitance placed in everything. In some high-speed systems, these 0.1uF capacitors simply won't work.

What are Murata's products suitable for medical applications? With the changes in the healthcare market environment, personal healthcare devices used for daily health management have also been affected. These products are smaller in size and support cloud connectivity. Murata's product features: By utilizing compact universal components (capacitors, inductors, etc.), we manufacture compact products with higher design freedom. Utilize Bluetooth Intelligent modules and wireless communication modules that support near-field communication (NFC) make it easier to manufacture daily health monitoring products with network connectivity capabilities.

Murata's ultra-thin DC-DC power management chip PE24110 is in mass production Murata Co., Ltd. has developed the "FlexiBK series (PE24110)" high-efficiency DC-DC converter IC, capable of 3.3 input voltage and an output limit of 12A, for low rise applications below 1.2mm. This product is available in a 4.0 × 3.2mm QFN (Quad Flat No led package) package, suitable for thin applications below 1.2mm.

Do we need to lay copper foil underneath the inductor for DC-DC power supply? Inductors have alternating current, and laying copper at the bottom of the inductor will generate eddy currents on the ground plane. The eddy current effect will affect the inductance of the power inductor, and eddy currents will also increase system losses. At the same time, the noise generated by alternating current will increase the noise on the ground plane, which will affect the stability of other signals. From the perspective of EMC, laying copper on the bottom of the inductor and a complete ground surface is beneficial for EMI design; The current production process of inductors has been upgraded, and shielded inductors are used. There are very few leaked magnetic induction lines, which have little impact on the inductance of the inductors and are also beneficial for heat dissipation.

USB4 noise reduction measures and verification solutions - practical operation Murata will provide a complete solution for USB noise reduction measures and verification from the following six aspects. 1. A brief history of USB. What noise issues may occur with USB4. 3. Noise reduction: How to apply CMCC is crucial (recommended CMCC products from Murata: NFG0QHB372HS2/NFG0QHB542HS2). 4. Evaluation of radiated noise. 5. Internal EMC assessment and response measures. 6. Signal integrity confirmation.

Murata obtained certification for the development process of the automotive functional safety standard "ISO 26262" Development process certification of automotive functional safety standards. Murata Manufacturing Co., Ltd. obtained the development process certification of the automotive functional safety standard "ISO 26262" issued by the German third-party certification body SGS-T Ü V Saar GmbH on February 13, 2024, and was awarded the certificate on May 21.

Product Recommendation Maker Dynamics Applications

Solar induced electricity: expanding the product lineup of multi-layer metal power inductors Sun Induce Electric Co., Ltd. has launched a multi-layer metal power inductor MCOIL ™ Mass production of two sizes and three products, including the LSCN series "LSCND1412HKTR24ME" (1.4x1.2x0.8mm, maximum height). These products are power inductors for choke coils used in power circuits for smartphones and wearable terminals. Compared with our previous product "LSCNE2012HKTR24MD" (2.0x1.25x0.8mm), the volume of "LSCND1412HKTR24ME" has decreased by about 30%, and the DC saturation current value is 6.5A (previously 6.0A), an increase of about 8%. This will help to promote the miniaturization and high-performance of the power circuit for the increasingly developed smartphones and wearable terminals with high functionality and versatility.

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}