HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

Alloy resistance Precision resistor fuse SMD fuse current diverter walter ever ohms

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

ETC0530S4R7MTT,ELLON,Molded Power Inductors

ETC0530S4R7MTT

Molded Power Inductors ,0530 ,4.7uH ,±20% ,- ,Chip SMD ,ELLON-ETC

✖

The image is for reference only, please refer to the drawing for details

Data Sheet： POWER _INDUCTORS_ETC.pdf

Product number：	L03-0530-4R7M0000SLC
Manufacturer Product Number：	ETC0530S4R7MTT
Manufacturer ：	ELLON
Series ：	ELLON-ETC
Type ：	Molded Power Inductors
Size ：	0530
Value ：	4.7uH
Tolerance ：	±20%
DC Resistance ：	4A
Description：	Molded Power Inductors ,0530 ,4.7uH ,±20% ,- ,Chip SMD ,ELLON-ETC

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	ELLON
Product Series	ELLON-ETC
Product Type	Molded Power Inductors
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name
Data Sheet	POWER _INDUCTORS_ETC.pdf

Lead time： Estimated delivery date 2026-10-12

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

1206 1.05R 1W 1% anti surge metal film resistance parameters and application introduction EGM16FT1R05DES is a surge resistant metal film surface mount resistor launched by Egnition. It is packaged in 1206 (3.2mm × 1.6mm), with a resistance of 1.05 Ω, an accuracy of ± 1%, a power of 1W, and a temperature coefficient of ± 50ppm/℃.

Do we need to lay copper foil underneath the inductor for DC-DC power supply? Inductors have alternating current, and laying copper at the bottom of the inductor will generate eddy currents on the ground plane. The eddy current effect will affect the inductance of the power inductor, and eddy currents will also increase system losses. At the same time, the noise generated by alternating current will increase the noise on the ground plane, which will affect the stability of other signals. From the perspective of EMC, laying copper on the bottom of the inductor and a complete ground surface is beneficial for EMI design; The current production process of inductors has been upgraded, and shielded inductors are used. There are very few leaked magnetic induction lines, which have little impact on the inductance of the inductors and are also beneficial for heat dissipation.

ESR bare copper shunt resistor product with increased power and new product ESR bare copper shunt resistors are mainly characterized by low resistance, high power, and low temperature drift, and are widely used in current sampling circuits. In current sampling circuits, the stability requirements for resistors are extremely strict. Therefore, different product materials have different product characteristics and application markets. With the market demand for product miniaturization, low power consumption, and fast charging and discharging, ELLON has launched a small volume high-power bare copper shunt resistor. This article provides a detailed introduction to the corresponding specification parameters.

A detailed introduction to the SMR series of Sart pure metal alloy resistors The Sart pure metal alloy resistance SMR series uses plastic sealing technology, also known as plastic sealing alloy resistance. The main characteristics of the Sart pure metal alloy resistance SMR series are as follows: 1. High power under the same reference range (up to 3W), 2. Complete resistance values (1m Ω~500m Ω), 3. High precision, with a maximum accuracy of 0.5%. This article provides a detailed introduction to the selection parameters of the Sart pure metal alloy resistance SMR series.

Detailed introduction of bare copper sheet resistors for SR low resistance shunt The bare copper resistance of SR low resistance shunt is mainly characterized by high current and high power. The bare copper resistance of SR low resistance shunt belongs to Ever ohms technology. The SR series low resistance shunt resistors of Ever ohms technology mainly have four volumes: 1206251239205930, with a minimum resistance value of 0.2mR (0.0002R) and a maximum power of 15W. SR low resistance shunt bare copper resistors are widely used in high-power power management systems, motor drivers, and battery management systems. This article by Hua Nian will provide a detailed introduction to the selection parameters and electrical characteristics of bare copper sheet resistors for Tian'er Technology's SR low resistance shunt.

Application Introduction of 2512 2.8R 3.5W Metal Film Surge Resistance Parameters EGM25FU2R80DDS is an anti surge metal film surface mount resistor launched by Ellon. It is packaged in 2512 (6.3mm × 3.2mm), with a resistance of 2.8 Ω± 1%, a rated power of 3.5W, and a temperature coefficient of ± 50ppm/℃.

Introduction to Parameters and Models of 1206 3R 1W Surge resistant High power Resistance Analysis of the technical advantages and applications of Ellon EAM16FT3R00DES 1206 3R 1W 1% 50PPM anti sulfide metal film patch resistor.

Sart pure metal alloy resistance SMA series The Sart SMA series resistance type belongs to pure metal alloy resistance, with a main volume of 2512, a resistance range of 0.5m Ω to 50m Ω, and a power of 2W and 3W. This article provides a table listing and explanation of the resistance parameters of the Sart SMA series pure metal alloys.

Definition and characteristics of sampling resistance This article introduces the definition of sampling resistance, the characteristics of sampling resistance, and the parameters of sampling resistance. Sampling resistor is a component used in electronic circuits to sample and measure the current or voltage in the circuit. It is usually made of metal materials with specific resistance values and power bearing capacity. Sampling resistors are widely used in various electronic devices, including measuring instruments, power management, communication equipment, etc.

Material and Characteristics Description of Precision Resistors The so-called precision resistor mainly refers to a resistor with high precision in resistance value and low temperature coefficient, which has high long-term reliability and is widely used in measuring equipment. Therefore, the materials required for producing such high-precision resistors are also very special and the production process is strict. The following will explain the commonly used materials for precision resistors: metal film, metal wire, metal thin, etc.

Product Recommendation Maker Dynamics Applications

ELLON High-Power Resistors Make a Grand Debut on Huanian Mall ELLON High-Power Resistors Make a Grand Debut on Huanian Mall

Introduction to ELLON ETR0805 Series Thin Film Precision Surface Mount Resistors The ETR0805 is a high-performance thin film precision chip resistor belonging to the ETR series, featuring a standard EIA 0805 package. Adopting advanced NiCr thin film construction, this resistor is meticulously engineered to deliver exceptional precision, low noise operation, and reliable performance across a wide range of applications. With a power rating of 1/10W (0.10W) at 70°C and compliance with lead-free soldering requirements, it is perfectly suited for modern electronic manufacturing processes. Whether used in industrial control systems, precision measurement equipment, communication devices, or consumer electronics, the ETR0805 consistently meets the stringent demands of high-precision circuit design.

ELLON SMD Resistors ERHV2010 Series Electric Flu Detection and High Voltage Resistance Product Introduction The ERHV2010 series current sensing resistors are high-voltage chip resistors manufactured using advanced thick-film technology, strictly complying with the EIA standard size 2010. With excellent electrical performance and stable structural design, they are widely used in various electronic devices that have strict requirements for voltage, resistance, and temperature stability. The product features an alumina substrate, a ruthenium oxide (RuO₂) resistive layer, and dual protection with glass and epoxy coatings. It integrates core advantages such as high voltage tolerance, high resistance accuracy, and a wide temperature operating range, providing key guarantees for the reliable operation of electronic systems.

ELLON Surface mount Resistors ERHV0402 Series Current Sensing Resistors Product Introduction The ERHV0402 series current sensing resistors are high-performance high-voltage thick film chip resistors that strictly comply with EIA standard sizing specifications. With their compact 0402 package (corresponding to 1/16W power rating), they demonstrate excellent adaptability in various electronic devices with strict space requirements. The product adopts a high-quality structural design consisting of an alumina ceramic substrate and a ruthenium oxide (RuO₂)/silver (Ag) resistive layer, with a dual protective coating of glass and epoxy resin on the surface. This not only ensures outstanding electrical performance but also provides excellent stability and reliability. It can be widely used in high-voltage electronic systems requiring precise current sensing, laying a solid foundation for the safe and stable operation of equipment.

ESRH25F7WR001K04G Low-Resistance Shunt Resitor ,2512 ,0.001R(1mR) ,±1% ,7W ,KARMA ,±25PPM ,ELLON-ESR

Introduction to EAM series products of high power resistance with sulfide resistant metal film Ellon (Yineng) has launched a new series of high power surface mount resistors (EAM) with anti sulfurization metal film. This series belongs to ultra-high power metal film anti sulfurization resistors, which are widely used in industries such as network communication, optoelectronic modules, rectifiers, automotive electronics, home appliances, industrial automation, etc. The main volume of EAM anti sulfurization metal film high-power resistors includes: 040206030805120612102010 and 2512 full series volume, which can meet the requirements of anti sulfurization and high power, with low temperature coefficient and stable products.

ELLON launches 1206 volume 2W high-power alloy resistor - latest product ELLON launches 1206 volume 2W high-power alloy resistor. The resistance range of the 1206 high-power 2W alloy resistor launched this time is 0.001R (1m Ω)~0.025R (25m Ω), mainly made of MnCu alloy, FeCrAl alloy, and Kama alloy. The 1206 volume 2W alloy resistor can replace the traditional 2512 volume 2W alloy, and has the characteristics of small volume, high power, and low cost. In the future, it may be extended to a wider range of volumes and resistance values. This article provides a detailed introduction to the resistance parameters of ELLON's 1206 volume high-power 2W alloy.

ESR bare copper shunt resistor product with increased power and new product ESR bare copper shunt resistors are mainly characterized by low resistance, high power, and low temperature drift, and are widely used in current sampling circuits. In current sampling circuits, the stability requirements for resistors are extremely strict. Therefore, different product materials have different product characteristics and application markets. With the market demand for product miniaturization, low power consumption, and fast charging and discharging, ELLON has launched a small volume high-power bare copper shunt resistor. This article provides a detailed introduction to the corresponding specification parameters.

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}