JX4S0020R065M_JX_MOSFETS_N-ch_450W_Parameters_ Price

JX4S0020R065M,JX,MOSFETS

Attribute Name	Attribute Value
Manufacturer	JX
Product Series	JX-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Attribute Name

Attribute Value

Manufacturer

Product Series

JX-MOS

Product Type

MOSFETS

EU RoHS

Compliant(2011/65/EU)

EU REACH

Dose not contain REACH SVHC(1907/2006/EC)

File Type	File Name
Company Profile	公司简介.pdf
Data Sheet	JX4S0020R065M.pdf

File Type

File Name

Company Profile

公司简介.pdf

Data Sheet

JX4S0020R065M.pdf

Product Recommendation Maker Dynamics Applications

What is MOS transistor? MOS transistor is an abbreviation for MOSFET. Introduction to MOS transistor The full English name of MOSFET is MOSFET (Metal Oxide Semiconductor Field Effect Transistor), which refers to the insulated gate type of MOSFET. Therefore, MOS transistors are sometimes referred to as insulated gate field-effect transistors. In general electronic circuits, MOS transistors are commonly used in amplifier circuits or switch circuits.

What are the advantages of MOS transistor over transistor? What are the differences and advantages between MOS (Metal Oxide Semiconductor Field Effect Transistor) and transistors? This article provides a detailed introduction.

Voltage polarity and symbol diagram of MOS transistor, N-MOS and P-MOS The following text introduces the symbol rules for N-MOS voltage polarity and P-MOS voltage polarity respectively

Characteristics and Application Scenarios of Silicon Carbide (SiC) SiC Ceramic is a high-performance material with characteristics such as high strength, high hardness, high temperature stability, excellent corrosion resistance, and low thermal expansion coefficient. It is widely used in fields such as semiconductor, aviation, defense, nuclear energy, and chemical industry.

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

Reverse Recovery Current and Electrical Test Item Vgs of Silicon Carbide (SiC) MOSFET The electrical testing item Vgs of SiC MOSFET mainly refers to the Gate Source Voltage. Reverse Recovery Current (Irr) refers to the current flowing through a diode during the reverse recovery process.

Calculation methods for P-channel enhanced VDS and CGS In a P-channel Enhanced Mode FET, VDS represents the voltage between the drain and source, while CGS represents the capacitance between the gate and source. When calculating VDS, it is necessary to consider the working state of the P-Channel Enhanced Mode FET. Generally, the following formula can be used for calculation:

Application of Silicon Carbide (SiC) Ceramics in Semiconductors Silicon carbide (SiC) ceramics are a semiconductor material widely used in many semiconductor applications. Here are some typical applications of silicon carbide ceramic semiconductors:

1200V SiC MOSFET tested under short-circuit conditions Short circuit capability of 1200 V SiC MOSFET and overcurrent protection solution using ready-made driver IC. Several design considerations were discussed to ensure accurate measurements. The test results indicate that the short-circuit capability of SiC MOSFET is highly correlated with the drain voltage and gate voltage, but not sensitive to the shell temperature and switching speed. By reducing the gate drive voltage or reducing the bus voltage, a longer endurance time can be achieved, but these solutions will lower the performance of SiC MOSFETs.

MOS transistor as a special driving circuit for switch transistor applications (commutation circuit) MOS transistor is a special driving circuit (commutation circuit) used as a switching transistor. Compared with ordinary transistor, MOS transistor has many advantages. However, when applied as a high-power switch transistor, due to the capacitive input characteristics of MOS transistor, the input terminal of MOS transistor is equivalent to a small capacitor. The input switch excitation signal is actually in the process of repeatedly charging and discharging this capacitor. During the charging and discharging process, the MOS transistor conducts and closes with a lag, which slows down the process of "on" and "off", which is not allowed by the switching element (increased power consumption, burning out the switch transistor).

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

Product number：	MOS-M0M126450W10065021JX
Manufacturer Product Number：	JX4S0020R065M
Manufacturer ：	JX
Series ：	JX-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	450W
Continuous Drain Current (ID) ：	100A
Drain-Source Voltage (V) ：	650V
Package ：	TO247-4
Description：	MOS ,JX3S0020R065M ,N-ch,450W ,100A ,650V ,TO247-4

JX4S0020R065M,JX,MOSFETS

JX4S0020R065M

Series Introduce Find Similar

Series Introduce Find Similar

File

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

JX4S0020R065M,JX,MOSFETS

JX4S0020R065M

Series Introduce Find Similar

Series Introduce Find Similar

File

Related Series

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications