HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

fuse ever ohms Alloy resistance SMD fuse current diverter walter Precision resistor

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJ2102,CJ,MOSFETS

CJ2102

MOS ,N-ch ,CJ2102 ,0.2W ,2.1A ,20V ,SOT-323

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM0150W20M0920V06CJ
Manufacturer Product Number：	CJ2102
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	0.2W
Continuous Drain Current (ID) ：	2.1A
Drain-Source Voltage (V) ：	20V
Package ：	SOT-323
Description：	MOS ,N-ch ,CJ2102 ,0.2W ,2.1A ,20V ,SOT-323

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-07-09

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

What is MOS transistor? MOS transistor is an abbreviation for MOSFET. Introduction to MOS transistor The full English name of MOSFET is MOSFET (Metal Oxide Semiconductor Field Effect Transistor), which refers to the insulated gate type of MOSFET. Therefore, MOS transistors are sometimes referred to as insulated gate field-effect transistors. In general electronic circuits, MOS transistors are commonly used in amplifier circuits or switch circuits.

What are the differences in application scenarios between single FET and MOSFET transistors? Single FET and MOSFET have a wide range of application prospects in switch circuits and power amplifiers, and the specific choice should be determined according to the specific application scenario and requirements.

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

Silicon carbide (SiC) diodes are diodes made from silicon carbide as raw material. Silicon carbide diode, claimed to have zero reverse recovery time, is a dedicated boost diode for high-efficiency PFC boost circuits.

Can digital signals pass through isolation chips Can digital signals pass through isolation chips? The answer is yes. Digital signals can be transmitted through isolation chips. Isolation chips are mainly used to isolate signals for the purpose of electrical isolation, ground isolation, or optical isolation. Isolation chips typically consist of two parts: isolation front-end and isolation back-end.

What are the solutions to reduce losses in SiC modules? The SiC module loss reduction scheme mainly considers the following four aspects: adopting low voltage and low frequency design, optimizing the driver program, optimizing the structural design, and adopting low side resonance technology.

Instructions for using silicon carbide (SiC) diodes When using silicon carbide (SiC) diodes, some safety factors should be taken into account, such as avoiding excessive current flowing through the diode to prevent damage. During use, attention should also be paid to circuit design and diode selection to ensure optimal system performance.

The switching performance of SiC MOSFET is controlled by gate drive The switching performance of SiC MOSFET is controlled by gate drive. Voltage source gate drive (VSG) is the most widely used structure in MOSFETs due to its low cost and simplified structure.

Silicon carbide diodes: an important role in the photovoltaic industry Silicon carbide (SiC) diodes have high stability and efficiency, making them suitable for various photovoltaic applications such as solar panels and solar systems. For example, in solar panels, silicon carbide diodes can prevent excessive current or overvoltage, thereby protecting solar cell components. In solar energy systems, it can also limit the charging current and control the charging and discharging process of the battery.

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}