HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

Precision resistor SMD fuse fuse walter Alloy resistance current diverter ever ohms

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJB04N60A,CJ,MOSFETS

CJB04N60A

MOS ,N-ch ,CJB04N60A ,2W ,4A ,600V ,TO-263-2L

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM0862W00M2660016CJ
Manufacturer Product Number：	CJB04N60A
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	2W
Continuous Drain Current (ID) ：	4A
Drain-Source Voltage (V) ：	600V
Package ：	TO-263-2L
Description：	MOS ,N-ch ,CJB04N60A ,2W ,4A ,600V ,TO-263-2L

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-06-18

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Comparison of driving circuit differences between SiC MOSFET and Si IGBT SiC MOSFET and Si IGBT are both indispensable products for the development of electronic products. SiC MOSFET and Si IGBT have many common characteristics and differences. Therefore, the following is a comparison of their product differences:

Instructions for using silicon carbide (SiC) diodes When using silicon carbide (SiC) diodes, some safety factors should be taken into account, such as avoiding excessive current flowing through the diode to prevent damage. During use, attention should also be paid to circuit design and diode selection to ensure optimal system performance.

Wide application of silicon carbide (SiC) MOSFET in new energy charging piles Silicon carbide power devices cover series such as 650V/2A-100A, 1200V/2A-90A, 1700V/5A-80A, etc. The products have been put into mass production and can fully benchmark the advanced quality and level of international brand peers. We have successively launched full current voltage level silicon carbide Schottky diodes and silicon carbide MOSFET series products that have passed industrial and automotive reliability tests, with performance reaching the international advanced level. They are applied in fields such as solar inverters, new energy electric vehicles and charging piles, smart grids, high-frequency welding, rail transportation, industrial control special power supplies, and national defense and military industries.

Calculation methods for P-channel enhanced VDS and CGS In a P-channel Enhanced Mode FET, VDS represents the voltage between the drain and source, while CGS represents the capacitance between the gate and source. When calculating VDS, it is necessary to consider the working state of the P-Channel Enhanced Mode FET. Generally, the following formula can be used for calculation:

What is the reason why a discharge resistor must be set for MOS switch applications? What is the reason why a discharge resistor must be set for MOS switch applications?

What are the differences in application scenarios between single FET and MOSFET transistors? Single FET and MOSFET have a wide range of application prospects in switch circuits and power amplifiers, and the specific choice should be determined according to the specific application scenario and requirements.

What are the advantages of MOS transistor over transistor? What are the differences and advantages between MOS (Metal Oxide Semiconductor Field Effect Transistor) and transistors? This article provides a detailed introduction.

Silicon carbide (SiC) power devices need to be used in conjunction with pull-down resistors Silicon carbide (SiC) pull-down resistor usually refers to the resistor used in SiC power devices to control the closing speed of the device. In SiC power devices, due to their high-speed switching characteristics and high peak voltage, high peak currents are generated when the control device is turned off, which can cause equipment failure or electromagnetic interference. Therefore, in SiC power devices, it is necessary to reduce the peak current during the shutdown process by using pull-down resistors to protect the equipment and reduce electromagnetic interference.

Why does high negative pressure in SiC MOS affect threshold drift The threshold drift of SiC MOSFET is affected by negative pressure because this device has a high leakage current, which reduces the difference between the control terminal voltage and the source terminal voltage, thereby affecting the switching performance of MOSFET. In addition, high negative pressure may also cause MOSFETs to enter rupture mode and trigger other adverse effects.

Silicon carbide MOSFET modules have significant advantages in the application of high-power power systems such as photovoltaics, wind power, electric vehicles, and rail transit. The advantages of high voltage, high frequency, and high efficiency of silicon carbide devices can break through the limitations of existing electric vehicle motor designs due to device performance, which is currently the focus of research and development in the field of electric vehicle motors at home and abroad.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}