HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

SMD fuse Precision resistor current diverter Alloy resistance fuse ever ohms walter

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJP04N60,CJ,MOSFETS

CJP04N60

MOS ,N-ch ,CJP04N60 ,2W ,4A ,600V ,TO-220-3L

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM0942W00M2660015CJ
Manufacturer Product Number：	CJP04N60
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	2W
Continuous Drain Current (ID) ：	4A
Drain-Source Voltage (V) ：	600V
Package ：	TO-220-3L
Description：	MOS ,N-ch ,CJP04N60 ,2W ,4A ,600V ,TO-220-3L

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

CJP04N60A

MOS ,N-ch ,CJP04N60A ,2W ,4A ,600V ,TO-220-3L

$0.000000 More

File

File Type	File Name

Lead time： Estimated delivery date 2025-12-16

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

1200V SiC MOSFET tested under short-circuit conditions Short circuit capability of 1200 V SiC MOSFET and overcurrent protection solution using ready-made driver IC. Several design considerations were discussed to ensure accurate measurements. The test results indicate that the short-circuit capability of SiC MOSFET is highly correlated with the drain voltage and gate voltage, but not sensitive to the shell temperature and switching speed. By reducing the gate drive voltage or reducing the bus voltage, a longer endurance time can be achieved, but these solutions will lower the performance of SiC MOSFETs.

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

Voltage drop factors of silicon carbide (SiC) diodes The voltage drop of silicon carbide (SiC) diodes refers to the electromotive force difference of SiC diodes. Silicon carbide diode is a semiconductor device with a P-N junction structure that can be used to control current or voltage. The voltage drop of a diode refers to the electromotive force difference between the P-N junction of the diode in the forward conducting state, that is, the forward bias voltage. This is due to the potential difference between the contact surfaces in the diode.

Introduction to Low Sensitivity SiC Power Modules Low inductance SiC power module refers to a power module that uses silicon carbide (SiC) as a semiconductor material and has a lower inductance value. Compared with traditional silicon (Si) power modules, low inductance SiC power modules have higher switching speed and lower switching losses, thereby improving the efficiency and reliability of the system.

Introduction to Power MOSFETs for Motor Drive Applications The application of motor drive is quite extensive, among which power MOSFET plays an important role. Anson Mei has a diverse range of power MOSFET product lines, among which NTBLS1D5N10MC unipolar, N-channel power MOSFET can meet the stringent requirements of related applications and is one of the best choices for motor drive control.

Silicon carbide (SiC) power devices need to be used in conjunction with pull-down resistors Silicon carbide (SiC) pull-down resistor usually refers to the resistor used in SiC power devices to control the closing speed of the device. In SiC power devices, due to their high-speed switching characteristics and high peak voltage, high peak currents are generated when the control device is turned off, which can cause equipment failure or electromagnetic interference. Therefore, in SiC power devices, it is necessary to reduce the peak current during the shutdown process by using pull-down resistors to protect the equipment and reduce electromagnetic interference.

Reverse Recovery Current and Electrical Test Item Vgs of Silicon Carbide (SiC) MOSFET The electrical testing item Vgs of SiC MOSFET mainly refers to the Gate Source Voltage. Reverse Recovery Current (Irr) refers to the current flowing through a diode during the reverse recovery process.

MOS transistor as a special driving circuit for switch transistor applications (commutation circuit) MOS transistor is a special driving circuit (commutation circuit) used as a switching transistor. Compared with ordinary transistor, MOS transistor has many advantages. However, when applied as a high-power switch transistor, due to the capacitive input characteristics of MOS transistor, the input terminal of MOS transistor is equivalent to a small capacitor. The input switch excitation signal is actually in the process of repeatedly charging and discharging this capacitor. During the charging and discharging process, the MOS transistor conducts and closes with a lag, which slows down the process of "on" and "off", which is not allowed by the switching element (increased power consumption, burning out the switch transistor).

Introduction to the Principle and Function of SiC Silicon Carbide MOSFET Silicon carbide MOSFET is a type of MOSFET manufactured based on silicon carbide material. Its structure mainly includes a silicon carbide substrate, an insulation layer, a gate electrode, a drain electrode, and a source electrode. In its working principle, when the voltage applied to the gate changes, the silicon carbide MOSFET can achieve control from the on state to the off state, realizing the function of power switching. Silicon carbide MOS recommendation: Junxin MOS

The main six stages of SiC chip manufacturing The main six specific processes of SiC chip manufacturing are pre-processing, wafer processing, crystal growth, integrated circuit design and fabrication, chip testing, and integration.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}