HNST WELCOME！ 0755-23173910

English /中文

{{searchSelectTypeText}}

Search

ever ohms Precision resistor Alloy resistance current diverter walter SMD fuse fuse

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJP04N65,CJ,MOSFETS

CJP04N65

MOS ,N-ch ,CJP04N65 ,2W ,4A ,650V ,TO-220-3L

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM0962W00M2665015CJ
Manufacturer Product Number：	CJP04N65
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	2W
Continuous Drain Current (ID) ：	4A
Drain-Source Voltage (V) ：	650V
Package ：	TO-220-3L
Description：	MOS ,N-ch ,CJP04N65 ,2W ,4A ,650V ,TO-220-3L

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

CJP04N65A

MOS ,N-ch ,CJP04N65A ,2W ,4A ,650V ,TO-220-3L

$0.000000 More

File

File Type	File Name

Lead time： Estimated delivery date 2024-12-26

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

5 important techniques for selecting gallium nitride (SiC) MOSFETs To prove that your choice of SiC as the preferred power semiconductor for switch mode design is correct, please consider the following prominent features. Compared to standard or super junction MOSFETs or even IGBTs, SiC devices can operate at higher voltages, frequencies, and temperatures. Most of the power loss of other devices does not exist in SiC devices, so the efficiency of SiC devices can reach over 90% in most applications. Initially, SiC devices were more expensive than other MOSFETs or IGBTs.

What are the differences between MOSFET and SBD? MOSFET and SBD are two different types of semiconductor devices, with the main differences as follows: 1. Different working principles, 2. Different conduction characteristics, and 3. Different costs and complexities.

Application of Silicon Carbide (SiC) Ceramics in Semiconductors Silicon carbide (SiC) ceramics are a semiconductor material widely used in many semiconductor applications. Here are some typical applications of silicon carbide ceramic semiconductors:

Calculation method and formula for MOS transistor losses The losses of MOS transistors can be estimated by calculating their current losses and power losses. Current loss refers to the loss caused by the passage of current inside a MOS transistor, which is due to the resistance loss between electrons and the silicon substrate when passing through the MOS transistor. This loss can be calculated using the following formula:

What are the solutions to reduce losses in SiC modules? The SiC module loss reduction scheme mainly considers the following four aspects: adopting low voltage and low frequency design, optimizing the driver program, optimizing the structural design, and adopting low side resonance technology.

Comparison of driving circuit differences between SiC MOSFET and Si IGBT SiC MOSFET and Si IGBT are both indispensable products for the development of electronic products. SiC MOSFET and Si IGBT have many common characteristics and differences. Therefore, the following is a comparison of their product differences:

What are the differences between gallium nitride (GaN) and silicon carbide (SiC)? Gallium nitride (GaN) and silicon carbide (SiC) power transistors, two types of compound semiconductor devices, have emerged as solutions. These devices compete with long-life silicon power lateral diffusion metal oxide semiconductor (LDMOS) MOSFETs and super junction MOSFETs. GaN and SiC devices are similar in some aspects, but there are also significant differences.

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

Introduction to SiC Silicon Carbide MOSFET Devices SiC devices are a new type of silicon-based MOSFET, especially SiC power devices with higher switching speed and wider output frequency. SiC power chips are mainly composed of MOSFETs and PN junctions.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}