HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

walter Alloy resistance Precision resistor SMD fuse ever ohms current diverter fuse

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJ3415,CJ,MOSFETS

CJ3415

MOS ,P-ch ,CJ3415 ,0.35W ,-4A ,-20V ,SOT-23

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MPM0450W35M15F2001CJ
Manufacturer Product Number：	CJ3415
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	P-ch
Power Dissipation (PD) ：	0.35W
Continuous Drain Current (ID) ：	-4A
Drain-Source Voltage (V) ：	-20V
Package ：	SOT-23
Description：	MOS ,P-ch ,CJ3415 ,0.35W ,-4A ,-20V ,SOT-23

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-09-17

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Introduction to Low Sensitivity SiC Power Modules Low inductance SiC power module refers to a power module that uses silicon carbide (SiC) as a semiconductor material and has a lower inductance value. Compared with traditional silicon (Si) power modules, low inductance SiC power modules have higher switching speed and lower switching losses, thereby improving the efficiency and reliability of the system.

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

Silicon carbide (SiC) power devices need to be used in conjunction with pull-down resistors Silicon carbide (SiC) pull-down resistor usually refers to the resistor used in SiC power devices to control the closing speed of the device. In SiC power devices, due to their high-speed switching characteristics and high peak voltage, high peak currents are generated when the control device is turned off, which can cause equipment failure or electromagnetic interference. Therefore, in SiC power devices, it is necessary to reduce the peak current during the shutdown process by using pull-down resistors to protect the equipment and reduce electromagnetic interference.

Combination of Silicon Carbide (SiC) Power Management Solutions Silicon carbide solutions support the replacement of aircraft's pneumatic and hydraulic systems with smaller, lighter, and more efficient electrical solutions to power onboard AC generators, actuators, and auxiliary power units (APU). This type of solution can also reduce the maintenance requirements of these systems. However, the most significant contribution of SiC technology lies in its mission to electrify commercial transport vehicles, which are one of the world's largest sources of GHG emissions. With the advent of 1700V metal oxide semiconductor field-effect transistors (MOSFETs) and configurable digital gate drive technology, today's SiC solutions enable designers to generate maximum productivity with minimal energy consumption for these systems.

Silicon carbide (SiC) power devices need to be used in conjunction with pull-down resistors Silicon carbide (SiC) pull-down resistor usually refers to the resistor used in SiC power devices to control the closing speed of the device. In SiC power devices, due to their high-speed switching characteristics and high peak voltage, high peak currents are generated when the control device is turned off, which can cause equipment failure or electromagnetic interference. Therefore, in SiC power devices, it is necessary to reduce the peak current during the shutdown process by using pull-down resistors to protect the equipment and reduce electromagnetic interference.

The difference between Schottky diodes and silicon carbide Schottky diodes Schottky diodes and silicon carbide Schottky diodes are two different types of diodes.

5 important techniques for selecting gallium nitride (SiC) MOSFETs To prove that your choice of SiC as the preferred power semiconductor for switch mode design is correct, please consider the following prominent features. Compared to standard or super junction MOSFETs or even IGBTs, SiC devices can operate at higher voltages, frequencies, and temperatures. Most of the power loss of other devices does not exist in SiC devices, so the efficiency of SiC devices can reach over 90% in most applications. Initially, SiC devices were more expensive than other MOSFETs or IGBTs.

ROHM Silicon Carbide BM2SC12xFP2-LBZ Model TO263-7L Package 1700V BM2SC12xFP2-LBZ is an advanced AC/DC converter IC in the industry, which adopts an integrated package. It has built a 1700V withstand voltage SiC MOSFET and a control circuit optimized for its drive into a small surface mount package (TO263-7L). Mainly suitable for auxiliary power supply of industrial equipment such as general-purpose inverters, AC servos, commercial air conditioners, street lamps, etc. that require handling high power. In addition, it can ensure long-term stable supply, which is very suitable for industrial equipment applications. (ROHM ROHM)

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

Introduction to SiC Silicon Carbide MOSFET Devices SiC devices are a new type of silicon-based MOSFET, especially SiC power devices with higher switching speed and wider output frequency. SiC power chips are mainly composed of MOSFETs and PN junctions.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}