PRF21BE471QB5RA,MURATA,PTC Temperature Sensor

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

• Murata's new product: 0603M series thermistor, suitable for automotive electronics Murata Manufacturing Co., Ltd. has developed a 0603M size (0.6 × 0.3 × 0.3mm) copper electrode negative temperature coefficient (NTC) thermistor, with models "NCU03XH103F6SRL" and "NCU03XH103F60RL". This new product expands the size lineup of the NCU series and meets the high-density and miniaturized requirements of circuit boards in the automotive market, as well as the high reliability requirements for electronic components. Mass production has begun and samples can be provided.

• USB4 noise reduction measures and verification solutions - practical operation Murata will provide a complete solution for USB noise reduction measures and verification from the following six aspects. 1. A brief history of USB. What noise issues may occur with USB4. 3. Noise reduction: How to apply CMCC is crucial (recommended CMCC products from Murata: NFG0QHB372HS2/NFG0QHB542HS2). 4. Evaluation of radiated noise. 5. Internal EMC assessment and response measures. 6. Signal integrity confirmation.

• 0.1uF (100nF) capacitors may not necessarily be suitable for filtering circuits Filter capacitors play a very important role in switching power supplies, and how to correctly select filter capacitors, especially the selection of output filter capacitors, is a concern for every engineering and technical personnel. On the power filtering circuit, we can see various capacitors with different capacitance values, such as 100uF, 10uF, 100nF, 10nF, etc. How are these parameters determined? In the future, don't see capacitors with 0.1uF capacitance placed in everything. In some high-speed systems, these 0.1uF capacitors simply won't work.

• Murata will achieve mass production of 2016 DFE2MCPHR33MJLLQ and DFE2MCPHR47MJLLQ metal power inductors Murata commercialized metal power inductors for automotive use, which are 2016 in size, have ultra-high industry standards for low DC resistance, support high current and high voltage resistance. Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed a new series of car mounted power inductors (1) "DFE2MCPH_JL (DFE2MCPHR33MJLLQ, DFE2MCPHR47MJLLQ) series" using wire wound metal alloys (hereinafter referred to as "this product"). It is a small car mounted power inductor with a size of 2016 (2.0x1.6mm), which not only achieves high voltage resistance of 40V, but also achieves industry ultra-high level (2) DC resistance and rated current. Mass production will begin in January 2024.

• Murata won IEEE Milestone Award Commercialization of MLCC using nickel internal electrodes. Murata Manufacturing Co., Ltd. commercialized multi-layer ceramic capacitors (Ni MLCC) using nickel internal electrodes, making contributions to industrial development. As a result, it was awarded the International Society for Electrical and Electronics (IEEE), The Institute of Electrical and Electronics Engineers, Inc. awarded the IEEE Milestone Award.

• What are Murata's products suitable for medical applications? With the changes in the healthcare market environment, personal healthcare devices used for daily health management have also been affected. These products are smaller in size and support cloud connectivity. Murata's product features: By utilizing compact universal components (capacitors, inductors, etc.), we manufacture compact products with higher design freedom. Utilize Bluetooth Intelligent modules and wireless communication modules that support near-field communication (NFC) make it easier to manufacture daily health monitoring products with network connectivity capabilities.

• Murata expands 0603M (0.6 * 0.3 * 0.3mm) PTC thermistor to 1K Murata Co., Ltd. has expanded its series of PTC thermistors with a size of 0603M (0.6 × 0.3 × 0.3mm) for overheating detection, specifically designed for mobile devices and vehicles. It has also added products with a nominal resistance of 1k Ω and sensing temperatures of 105 ℃ and 115 ℃. This product is scheduled to start mass production from October.

• Murata achieved mass production of 0603 (1608) 1uF 100V SMT ceramic capacitors (MLCC) The Murata Production Institute of Corporation has successfully developed a multi-layer ceramic capacitor "GRM188D72A105KE01" for 48V lines in base stations, servers, and data centers, and has been put into mass production. This product is available at 1608M (1.6 × 0.8mm) size and rated voltage of 100V can achieve 1 μ F's super large electrostatic capacity (according to Murata survey data as of November 20, 2023). GRM188D72A105KE01 (0603 1uF 100V X7R 10%) This model uses high-temperature resistant material X7T, with a temperature environment of -55 ℃~125 ℃, and a durability testing environment of (125 ℃ rated voltage * 150% 1000 hours)

• Murata officially mass-produced 0603 (1608) volume, 100UF high-capacity MLCC laminated ceramics Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first multi-layer ceramic capacitor with a size of 1608M (1.6 × 0.8mm) and an electrostatic capacity of up to 100 µ F (hereinafter referred to as "this product"). The "GRM188C80E107M" with a rated voltage of 2.5Vdc, a working temperature of up to 105 ° C, and a temperature characteristic of X6S (1), and the "GRM188R60E107M" with a working temperature of up to 85 ° C and a temperature characteristic of X5R (2) have started mass production. In addition, the product (3) with a rated voltage of 4VDC and a working temperature of up to 85 ° C is planned to start mass production in 2025.

• Murata's ultra-thin DC-DC power management chip PE24110 is in mass production Murata Co., Ltd. has developed the "FlexiBK series (PE24110)" high-efficiency DC-DC converter IC, capable of 3.3 input voltage and an output limit of 12A, for low rise applications below 1.2mm. This product is available in a 4.0 × 3.2mm QFN (Quad Flat No led package) package, suitable for thin applications below 1.2mm.

Product Recommendation Maker Dynamics Applications

• 10 µ F/50Vdc/0805 inch MLCC mass-produced GCM21BE71H106KE02 Murata Manufacturing Co., Ltd. has developed a multi-layer ceramic capacitor (MLCC) for the automotive market, which is Murata's first product (Murata survey results, as of June 25, 2025) with a size of 0805 inches (2.0 × 1.25mm), a rated voltage of 50Vdc, and a capacitance of 10 µ F. The new product code is GCM21BE71H106KE02 and has started mass production.

• Murata is the first to launch 006003 Ultra Small Volume Chip Capacitor (MLCC) Murata Co., Ltd. has developed the world's first ultra small 006003 inch (0.16mmx0.08mm) multilayer ceramic capacitor. Compared with the existing ultra small product 008004 inch (0.25mmx0.125mm), the volume has been reduced by about 75%.

• Murata expands 0603M (0.6 * 0.3 * 0.3mm) PTC thermistor to 1K Murata Co., Ltd. has expanded its series of PTC thermistors with a size of 0603M (0.6 × 0.3 × 0.3mm) for overheating detection, specifically designed for mobile devices and vehicles. It has also added products with a nominal resistance of 1k Ω and sensing temperatures of 105 ℃ and 115 ℃. This product is scheduled to start mass production from October.

• Murata's ultra-thin DC-DC power management chip PE24110 is in mass production Murata Co., Ltd. has developed the "FlexiBK series (PE24110)" high-efficiency DC-DC converter IC, capable of 3.3 input voltage and an output limit of 12A, for low rise applications below 1.2mm. This product is available in a 4.0 × 3.2mm QFN (Quad Flat No led package) package, suitable for thin applications below 1.2mm.

• Murata's new product: 0603M series thermistor, suitable for automotive electronics Murata Manufacturing Co., Ltd. has developed a 0603M size (0.6 × 0.3 × 0.3mm) copper electrode negative temperature coefficient (NTC) thermistor, with models "NCU03XH103F6SRL" and "NCU03XH103F60RL". This new product expands the size lineup of the NCU series and meets the high-density and miniaturized requirements of circuit boards in the automotive market, as well as the high reliability requirements for electronic components. Mass production has begun and samples can be provided.

• Murata's Radisol antenna anti-interference device new product recommendation When using discrete components to form energy storage circuits, it takes time to adjust constants. Therefore, Murata's Radisol device has pre assumed antenna combinations that may require countermeasures and prepared a rich product lineup of 11 types. Murata's Radisol antenna anti-interference device is suitable for small, multi antenna terminal devices such as smartphones, smartwatches, and wearable devices.

• Murata has developed Murata's first small 0603 size antenna anti-interference device, "Radisol" Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first (1) "antenna anti-interference device 'Radisol'", which is a new product that can be equipped on antennas to suppress wireless performance degradation. Mass production will begin in June 2024. Mainly used in portable communication products such as wearables and smartphones.

• Murata officially mass-produced 0603 (1608) volume, 100UF high-capacity MLCC laminated ceramics Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first multi-layer ceramic capacitor with a size of 1608M (1.6 × 0.8mm) and an electrostatic capacity of up to 100 µ F (hereinafter referred to as "this product"). The "GRM188C80E107M" with a rated voltage of 2.5Vdc, a working temperature of up to 105 ° C, and a temperature characteristic of X6S (1), and the "GRM188R60E107M" with a working temperature of up to 85 ° C and a temperature characteristic of X5R (2) have started mass production. In addition, the product (3) with a rated voltage of 4VDC and a working temperature of up to 85 ° C is planned to start mass production in 2025.