IR4427STRPBF,INFINEON,Unclassified

Product Recommendation Maker Dynamics Applications

• 

  IRMCF171TY

  IRMCF171TY LQFP-48(7x7)

  $0.000000 More

• 

  IKCM15L60GA

  IKCM15L60GA DIP-24

  $0.000000 More

• 

  IRS4427STRPBF

  IRS4427STRPBF SOIC-8

  $0.000000 More

• 

  LTV-817S-TA1-C

  LTV-817S-TA1-C

  $0.000000 More

Product Recommendation Maker Dynamics Applications

• Circuit symbols for silicon carbide (SIC) MOSFETs The circuit symbol of silicon carbide (SiC) MOSFET is similar to that of traditional silicon MOSFET, except that some special markings are added to the symbol to indicate its characteristics.

• Introduction to Low Sensitivity SiC Power Modules Low inductance SiC power module refers to a power module that uses silicon carbide (SiC) as a semiconductor material and has a lower inductance value. Compared with traditional silicon (Si) power modules, low inductance SiC power modules have higher switching speed and lower switching losses, thereby improving the efficiency and reliability of the system.

• Combination of Silicon Carbide (SiC) Power Management Solutions Silicon carbide solutions support the replacement of aircraft's pneumatic and hydraulic systems with smaller, lighter, and more efficient electrical solutions to power onboard AC generators, actuators, and auxiliary power units (APU). This type of solution can also reduce the maintenance requirements of these systems. However, the most significant contribution of SiC technology lies in its mission to electrify commercial transport vehicles, which are one of the world's largest sources of GHG emissions. With the advent of 1700V metal oxide semiconductor field-effect transistors (MOSFETs) and configurable digital gate drive technology, today's SiC solutions enable designers to generate maximum productivity with minimal energy consumption for these systems.

• The main six stages of SiC chip manufacturing The main six specific processes of SiC chip manufacturing are pre-processing, wafer processing, crystal growth, integrated circuit design and fabrication, chip testing, and integration.

• What are the design issues of inverters during the transition from silicon to silicon carbide (SiC)? The design of silicon carbide device inverters is a complex process that requires consideration of many factors to ensure their reliability and performance. Therefore, designers need to fully understand the characteristics of silicon carbide devices and make corresponding adjustments during design to ensure that the inverter can meet the requirements of the application environment

• What are the differences between gallium nitride (GaN) and silicon carbide (SiC)? Gallium nitride (GaN) and silicon carbide (SiC) power transistors, two types of compound semiconductor devices, have emerged as solutions. These devices compete with long-life silicon power lateral diffusion metal oxide semiconductor (LDMOS) MOSFETs and super junction MOSFETs. GaN and SiC devices are similar in some aspects, but there are also significant differences.

• Reverse Recovery Current and Electrical Test Item Vgs of Silicon Carbide (SiC) MOSFET The electrical testing item Vgs of SiC MOSFET mainly refers to the Gate Source Voltage. Reverse Recovery Current (Irr) refers to the current flowing through a diode during the reverse recovery process.

• Why does high negative pressure in SiC MOS affect threshold drift The threshold drift of SiC MOSFET is affected by negative pressure because this device has a high leakage current, which reduces the difference between the control terminal voltage and the source terminal voltage, thereby affecting the switching performance of MOSFET. In addition, high negative pressure may also cause MOSFETs to enter rupture mode and trigger other adverse effects.

• Power module equipped with SiC MOSFET and SiC SBD Recommendation: Power modules equipped with SiC MOSFETs and SiC SBDs

• Wide application of silicon carbide (SiC) MOSFET in new energy charging piles Silicon carbide power devices cover series such as 650V/2A-100A, 1200V/2A-90A, 1700V/5A-80A, etc. The products have been put into mass production and can fully benchmark the advanced quality and level of international brand peers. We have successively launched full current voltage level silicon carbide Schottky diodes and silicon carbide MOSFET series products that have passed industrial and automotive reliability tests, with performance reaching the international advanced level. They are applied in fields such as solar inverters, new energy electric vehicles and charging piles, smart grids, high-frequency welding, rail transportation, industrial control special power supplies, and national defense and military industries.

Product Recommendation Maker Dynamics Applications