2SA2029_CJ_Bipolar Transistors_PNP_50V_Parameters_ Price

2SA2029,CJ,Bipolar Transistors

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-TRANSISTOR
Product Type	Bipolar Transistors
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Attribute Name

Attribute Value

Manufacturer

Product Series

CJ-TRANSISTOR

Product Type

Bipolar Transistors

EU RoHS

Compliant(2011/65/EU)

EU REACH

Dose not contain REACH SVHC(1907/2006/EC)

File Type	File Name
Data Sheet	2SA2029_SOT-723

File Type

File Name

Data Sheet

2SA2029_SOT-723

Product Recommendation Maker Dynamics Applications

Calculation method and formula for MOS transistor losses The losses of MOS transistors can be estimated by calculating their current losses and power losses. Current loss refers to the loss caused by the passage of current inside a MOS transistor, which is due to the resistance loss between electrons and the silicon substrate when passing through the MOS transistor. This loss can be calculated using the following formula:

What are the differences between SiC SBD and SiC MOSFET? SiC SBD and SiC MOSFET are chips made of polarized silicon carbide material, which have high heat dissipation and conductivity. The difference lies in:

Why does high negative pressure in SiC MOS affect threshold drift The threshold drift of SiC MOSFET is affected by negative pressure because this device has a high leakage current, which reduces the difference between the control terminal voltage and the source terminal voltage, thereby affecting the switching performance of MOSFET. In addition, high negative pressure may also cause MOSFETs to enter rupture mode and trigger other adverse effects.

Reverse Recovery Current and Electrical Test Item Vgs of Silicon Carbide (SiC) MOSFET The electrical testing item Vgs of SiC MOSFET mainly refers to the Gate Source Voltage. Reverse Recovery Current (Irr) refers to the current flowing through a diode during the reverse recovery process.

What are the differences between gallium nitride (GaN) and silicon carbide (SiC)? Gallium nitride (GaN) and silicon carbide (SiC) power transistors, two types of compound semiconductor devices, have emerged as solutions. These devices compete with long-life silicon power lateral diffusion metal oxide semiconductor (LDMOS) MOSFETs and super junction MOSFETs. GaN and SiC devices are similar in some aspects, but there are also significant differences.

What are the advantages of MOS transistor over transistor? What are the differences and advantages between MOS (Metal Oxide Semiconductor Field Effect Transistor) and transistors? This article provides a detailed introduction.

What are the advantages of SiC MOSFET over Si MOSFET Compared with Si MOSFETs, SiC MOSFETs have many advantages, including the following:

Combination of Silicon Carbide (SiC) Power Management Solutions Silicon carbide solutions support the replacement of aircraft's pneumatic and hydraulic systems with smaller, lighter, and more efficient electrical solutions to power onboard AC generators, actuators, and auxiliary power units (APU). This type of solution can also reduce the maintenance requirements of these systems. However, the most significant contribution of SiC technology lies in its mission to electrify commercial transport vehicles, which are one of the world's largest sources of GHG emissions. With the advent of 1700V metal oxide semiconductor field-effect transistors (MOSFETs) and configurable digital gate drive technology, today's SiC solutions enable designers to generate maximum productivity with minimal energy consumption for these systems.

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

What are the measures for surge suppression? The reasons for generating surges are multifaceted, and surges are a type of spike pulse with high rising speed and short duration. Overvoltage in the power grid, switch ignition, reverse voltage, static electricity, and motor/power supply noise are all factors that cause surges. And surge protectors provide a simple, economical, and reliable protection method for power surge protection of electronic devices.

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

Product number：	QT-TQT083P50VC02011104CJR
Manufacturer Product Number：	2SA2029
Manufacturer ：	CJ
Series ：	CJ-TRANSISTOR
Product Type ：	Bipolar Transistors
Polarity ：	PNP
Emitter Voltage(VCEO) ：	50V
Base Voltage(VCBO) ：	60V
Power Disspation ：	150mW
package ：	SOT-723
Description：	Bipolar Transistors ,2SA2029 ,PNP ,VCEO:50V ,VCBO: 60V ,150mW ,150mA ,SOT-723,FR

2SA2029,CJ,Bipolar Transistors

2SA2029

Series Introduce Find Similar

Series Introduce Find Similar

File

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

{{ isChinese?level2Category.viewNameCn:level2Category.viewNameEn }}

2SA2029,CJ,Bipolar Transistors

2SA2029

Series Introduce Find Similar

Series Introduce Find Similar

File

Related Series

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications