HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

walter current diverter Alloy resistance ever ohms Precision resistor SMD fuse fuse

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

BC848,CJ,Bipolar Transistors

BC848

Bipolar Transistors ,BC848 ,NPN ,VCEO:30V ,VCBO: 30V ,200mW ,100mA ,SOT-23,1L

✖

The image is for reference only, please refer to the drawing for details

Product number：	QT-TQT414N30VC03060301CJL
Manufacturer Product Number：	BC848
Manufacturer ：	CJ
Series ：	CJ-TRANSISTOR
Product Type ：	Bipolar Transistors
Polarity ：	NPN
Emitter Voltage(VCEO) ：	30V
Base Voltage(VCBO) ：	30V
Power Disspation ：	200mW
package ：	SOT-23
Description：	Bipolar Transistors ,BC848 ,NPN ,VCEO:30V ,VCBO: 30V ,200mW ,100mA ,SOT-23,1L

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-TRANSISTOR
Product Type	Bipolar Transistors
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-09-29

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

The difference between Schottky diodes and silicon carbide Schottky diodes Schottky diodes and silicon carbide Schottky diodes are two different types of diodes.

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

Detailed explanation of reverse recovery principle of silicon carbide (SiC) diode Silicon carbide diodes are unipolar devices, so compared to traditional silicon fast recovery diodes (silicon FRDs), silicon carbide diodes have ideal reverse recovery characteristics. When the device switches from forward to reverse blocking direction, there is almost no reverse recovery power, and the reverse recovery time is less than 20ns. Even the reverse recovery time of 600V10A silicon carbide diodes is less than 10ns.

What are the differences between SiC SBD and SiC MOSFET? SiC SBD and SiC MOSFET are chips made of polarized silicon carbide material, which have high heat dissipation and conductivity. The difference lies in:

Introduction to SiC Silicon Carbide MOSFET Devices SiC devices are a new type of silicon-based MOSFET, especially SiC power devices with higher switching speed and wider output frequency. SiC power chips are mainly composed of MOSFETs and PN junctions.

Why is the development of high-voltage SiC MOSFET devices slow High voltage SiC MOSFET devices have many advantages, such as low on resistance, high temperature performance, and high-frequency characteristics, and therefore have broad prospects in some applications, such as electric vehicles, power electronic converters, and solar inverters. However, the development of these devices has been relatively slow, possibly due to the following reasons:

The main six stages of SiC chip manufacturing The main six specific processes of SiC chip manufacturing are pre-processing, wafer processing, crystal growth, integrated circuit design and fabrication, chip testing, and integration.

Calculation methods for P-channel enhanced VDS and CGS In a P-channel Enhanced Mode FET, VDS represents the voltage between the drain and source, while CGS represents the capacitance between the gate and source. When calculating VDS, it is necessary to consider the working state of the P-Channel Enhanced Mode FET. Generally, the following formula can be used for calculation:

Wide application of silicon carbide (SiC) MOSFET in new energy charging piles Silicon carbide power devices cover series such as 650V/2A-100A, 1200V/2A-90A, 1700V/5A-80A, etc. The products have been put into mass production and can fully benchmark the advanced quality and level of international brand peers. We have successively launched full current voltage level silicon carbide Schottky diodes and silicon carbide MOSFET series products that have passed industrial and automotive reliability tests, with performance reaching the international advanced level. They are applied in fields such as solar inverters, new energy electric vehicles and charging piles, smart grids, high-frequency welding, rail transportation, industrial control special power supplies, and national defense and military industries.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}