HNST WELCOME！ 0755-23173910

English /中文

Search

current diverter Precision resistor walter fuse Alloy resistance SMD fuse ever ohms

Cart 0

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

KTA2014,CJ,Bipolar Transistors

KTA2014

Bipolar Transistors ,KTA2014 ,PNP ,VCEO:50V ,VCBO: 50V ,100mW ,150mA ,SOT-323,SG

✖

The image is for reference only, please refer to the drawing for details

Data Sheet： KTA2014_SOT-323

Product number：	QT-TQT580P50VC05141102CJG
Manufacturer Product Number：	KTA2014
Manufacturer ：	CJ
Series ：	CJ-TRANSISTOR
Product Type ：	Bipolar Transistors
Polarity ：	PNP
Emitter Voltage(VCEO) ：	50V
Base Voltage(VCBO) ：	50V
Power Disspation ：	100mW
package ：	SOT-323
Description：	Bipolar Transistors ,KTA2014 ,PNP ,VCEO:50V ,VCBO: 50V ,100mW ,150mA ,SOT-323,SG

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-TRANSISTOR
Product Type	Bipolar Transistors
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

File

File Type	File Name
Data Sheet	KTA2014_SOT-323

Lead time： Estimated delivery date 2025-05-14

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

5 important techniques for selecting gallium nitride (SiC) MOSFETs To prove that your choice of SiC as the preferred power semiconductor for switch mode design is correct, please consider the following prominent features. Compared to standard or super junction MOSFETs or even IGBTs, SiC devices can operate at higher voltages, frequencies, and temperatures. Most of the power loss of other devices does not exist in SiC devices, so the efficiency of SiC devices can reach over 90% in most applications. Initially, SiC devices were more expensive than other MOSFETs or IGBTs.

Analysis of Silicon Carbide (SiC) Technology Barriers: What are the Silicon Carbide Technology Barriers Groove type silicon carbide power devices have greater manufacturing difficulty. According to the different device structures, silicon carbide power devices can be mainly divided into planar devices and trench devices. Flat silicon carbide power devices have good unit consistency, simple manufacturing process, but are prone to JFET effect and have high parasitic capacitance and on state resistance. Compared to planar devices, groove type silicon carbide power devices have lower unit consistency and more complex manufacturing processes. However, the groove structure is beneficial for increasing device unit density, reducing the occurrence of JFET effect, and solving the problem of low channel mobility. It has excellent performance such as low on resistance, low parasitic capacitance, and low switching energy consumption, and has significant cost and performance advantages. It has become the mainstream direction of silicon carbide power device development.

What are the differences between MOSFET and SBD? MOSFET and SBD are two different types of semiconductor devices, with the main differences as follows: 1. Different working principles, 2. Different conduction characteristics, and 3. Different costs and complexities.

Design and Manufacturing Process of Silicon Carbide (SiC) MOSFET Chip For silicon carbide MOSFETs (SiC MOSFETs), high-quality substrates can be purchased externally, and high-quality epitaxial wafers can also be purchased externally. However, this only provides a good foundation for obtaining a silicon carbide device. High performance silicon carbide devices have extremely high requirements for device design and manufacturing processes. This article will introduce you to the design and manufacturing process of SiC MOSFET devices.

The difference between Schottky diodes and silicon carbide Schottky diodes Schottky diodes and silicon carbide Schottky diodes are two different types of diodes.

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

Comparison of driving circuit differences between SiC MOSFET and Si IGBT SiC MOSFET and Si IGBT are both indispensable products for the development of electronic products. SiC MOSFET and Si IGBT have many common characteristics and differences. Therefore, the following is a comparison of their product differences:

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

Silicon carbide diodes: an important role in the photovoltaic industry Silicon carbide (SiC) diodes have high stability and efficiency, making them suitable for various photovoltaic applications such as solar panels and solar systems. For example, in solar panels, silicon carbide diodes can prevent excessive current or overvoltage, thereby protecting solar cell components. In solar energy systems, it can also limit the charging current and control the charging and discharging process of the battery.

Reverse Recovery Current and Electrical Test Item Vgs of Silicon Carbide (SiC) MOSFET The electrical testing item Vgs of SiC MOSFET mainly refers to the Gate Source Voltage. Reverse Recovery Current (Irr) refers to the current flowing through a diode during the reverse recovery process.

Product Recommendation Maker Dynamics Applications