HNST WELCOME！ 0755-23173910

English /中文

Search

ever ohms SMD fuse current diverter Precision resistor walter fuse Alloy resistance

Cart 0

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

ESR91F6W0R002K02G,ELLON,Low-Resistance Shunt Resistor

ESR91F6W0R002K02G

Low-Resistance Shunt Resitor ,3921 ,0.002R(2mR) ,±1% ,6W ,KARMA ,±75PPM ,ELLON-ESR

✖

The image is for reference only, please refer to the drawing for details

Data Sheet： ESRH_Rev_03_13.pdf

RoHs Report： esr_rohs_2024_7.pdf

REACH Report： ESR_REACH_2024_7.pdf

Product number：	R08-3921-R002F1LKA1KESR
Manufacturer Product Number：	ESR91F6W0R002K02G
Manufacturer ：	ELLON
Series ：	ELLON-ESRH
Type ：	Low-Resistance Shunt Resistor
Size ：	3921
Resistance Value ：	0.002Ω(2mR)
Resistance Tolerance ：	±1%
TCR(ppm) ：	±75PPM
Resistance Power ：	6W
Description：	Low-Resistance Shunt Resitor ,3921 ,0.002R(2mR) ,±1% ,6W ,KARMA ,±75PPM ,ELLON-ESR

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	ELLON
Product Series	ELLON-ESRH
Product Type	Low-Resistance Shunt Resitor
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

File

File Type	File Name
Data Sheet	ESRH_Rev_03_13.pdf
RoHs Report	esr_rohs_2024_7.pdf
REACH Report	ESR_REACH_2024_7.pdf

Lead time： Estimated delivery date 2025-05-15

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Do we need to lay copper foil underneath the inductor for DC-DC power supply? Inductors have alternating current, and laying copper at the bottom of the inductor will generate eddy currents on the ground plane. The eddy current effect will affect the inductance of the power inductor, and eddy currents will also increase system losses. At the same time, the noise generated by alternating current will increase the noise on the ground plane, which will affect the stability of other signals. From the perspective of EMC, laying copper on the bottom of the inductor and a complete ground surface is beneficial for EMI design; The current production process of inductors has been upgraded, and shielded inductors are used. There are very few leaked magnetic induction lines, which have little impact on the inductance of the inductors and are also beneficial for heat dissipation.

ELLON launches 1206 volume 2W high-power alloy resistor - latest product ELLON launches 1206 volume 2W high-power alloy resistor. The resistance range of the 1206 high-power 2W alloy resistor launched this time is 0.001R (1m Ω)~0.025R (25m Ω), mainly made of MnCu alloy, FeCrAl alloy, and Kama alloy. The 1206 volume 2W alloy resistor can replace the traditional 2512 volume 2W alloy, and has the characteristics of small volume, high power, and low cost. In the future, it may be extended to a wider range of volumes and resistance values. This article provides a detailed introduction to the resistance parameters of ELLON's 1206 volume high-power 2W alloy.

Comprehensive introduction to the definition, characteristics, and substitutes of alloy resistance Hnstshop Mall provides a comprehensive introduction to the definition of alloy resistance, material composition, characteristics and characteristics, resistance range, temperature coefficient, power bearing capacity, accuracy, reliability, application fields, and parameter substitution. Buy alloy resistors at Shanghuanian Mall with complete models and the fastest delivery time is 1 hour.

What is long electrode resistance? What are the characteristics Long electrode patch resistor is a special structure of patch resistor. By using side electrodes as solder pads, the contact area between the solder pads and the PCB is increased, resulting in better heat dissipation and high current. It has excellent stability and impact resistance during use. Long electrode surface mount resistors are divided into metal foil long electrode surface mount resistors, also known as alloy resistors, and wide electrode surface mount resistors in later processes. Their main advantage is their strong impact resistance.

A detailed introduction to the resistance of the Sart SMSAP series high-power low resistance shunt resistor A detailed introduction to the high power and low resistance shunt resistors of the Sart SMSAP series, and the preferred product for SMT high-power current detection solutions. At present, the maximum power of the product is 15W, and the resistance value can be developed to 0.1m Ω. It has the characteristics of low temperature rise, low sensitivity, and lead-free, suitable for various high-power, high-precision, and low TCR usage scenarios.

Material and Characteristics Description of Precision Resistors The so-called precision resistor mainly refers to a resistor with high precision in resistance value and low temperature coefficient, which has high long-term reliability and is widely used in measuring equipment. Therefore, the materials required for producing such high-precision resistors are also very special and the production process is strict. The following will explain the commonly used materials for precision resistors: metal film, metal wire, metal thin, etc.

A detailed introduction to the SMR series of Sart pure metal alloy resistors The Sart pure metal alloy resistance SMR series uses plastic sealing technology, also known as plastic sealing alloy resistance. The main characteristics of the Sart pure metal alloy resistance SMR series are as follows: 1. High power under the same reference range (up to 3W), 2. Complete resistance values (1m Ω~500m Ω), 3. High precision, with a maximum accuracy of 0.5%. This article provides a detailed introduction to the selection parameters of the Sart pure metal alloy resistance SMR series.

After dismantling the new generation 1000 Pro energy storage power supply of the electric scooter, it was discovered that so many fuses and alloy resistors were used! After dismantling the new generation 1000 Pro energy storage power supply of the electric scooter, it was discovered that so many fuses and alloy resistors were used! For example, ESR3920 0.002R (2mR), 2512 0.002R (2mR), disposable fuses include 1032 60A and 2410 15A, and so on.

Definition and characteristics of sampling resistance This article introduces the definition of sampling resistance, the characteristics of sampling resistance, and the parameters of sampling resistance. Sampling resistor is a component used in electronic circuits to sample and measure the current or voltage in the circuit. It is usually made of metal materials with specific resistance values and power bearing capacity. Sampling resistors are widely used in various electronic devices, including measuring instruments, power management, communication equipment, etc.

Ellon brand new product: 2512 0.2mR/0.0002R 7W high-power bare copper resistance introduction Introduction to Ellon brand new product: 2512 0.2mR/0.0002R 7W high-power bare copper sheet resistor. The ESR25F7W0M20M04G resistor adopts a compact package size of 2512 (6.4 * 3.2), which not only meets the requirements of modern electronic devices for miniaturization and integration, but also ensures the heat dissipation efficiency of the resistor during operation. Its resistance value is 0.0002R (0.2mR),

Product Recommendation Maker Dynamics Applications

Introduction to EAM series products of high power resistance with sulfide resistant metal film Ellon (Yineng) has launched a new series of high power surface mount resistors (EAM) with anti sulfurization metal film. This series belongs to ultra-high power metal film anti sulfurization resistors, which are widely used in industries such as network communication, optoelectronic modules, rectifiers, automotive electronics, home appliances, industrial automation, etc. The main volume of EAM anti sulfurization metal film high-power resistors includes: 040206030805120612102010 and 2512 full series volume, which can meet the requirements of anti sulfurization and high power, with low temperature coefficient and stable products.

ELLON launches 1206 volume 2W high-power alloy resistor - latest product ELLON launches 1206 volume 2W high-power alloy resistor. The resistance range of the 1206 high-power 2W alloy resistor launched this time is 0.001R (1m Ω)~0.025R (25m Ω), mainly made of MnCu alloy, FeCrAl alloy, and Kama alloy. The 1206 volume 2W alloy resistor can replace the traditional 2512 volume 2W alloy, and has the characteristics of small volume, high power, and low cost. In the future, it may be extended to a wider range of volumes and resistance values. This article provides a detailed introduction to the resistance parameters of ELLON's 1206 volume high-power 2W alloy.

ESR bare copper shunt resistor product with increased power and new product ESR bare copper shunt resistors are mainly characterized by low resistance, high power, and low temperature drift, and are widely used in current sampling circuits. In current sampling circuits, the stability requirements for resistors are extremely strict. Therefore, different product materials have different product characteristics and application markets. With the market demand for product miniaturization, low power consumption, and fast charging and discharging, ELLON has launched a small volume high-power bare copper shunt resistor. This article provides a detailed introduction to the corresponding specification parameters.