STE0603MW50R015F_WALTER_Metal Current Sensing Chip Resistor_0603_0.015Ω(15mR)_Parameters_ Price

Attribute Name	Attribute Value
Product Type	Metal Foil Current Sensing Resistor
Resistance Value	R002-R700
Resistance Tolerance	±0.5%(D) / ±1%(F)
Size	0603/0805/1206/2010 /2512/3921/4527
Power Rating	1/2W~4W
Material	MnCu alloy
Substrate	Alumina Ceramic
Adhesion layer	Epoxy
Resistive element	Cu alloy
Terminal electrode	Cu / Ni / Sn
Protective coating	Flame-retardant epoxy
Marking coating	Flame-retardant epoxy
Operating Temperature	-55℃～170℃
Storage Conditions	10℃~40℃
Preheating	145 ± 15℃, max. 120 sec
Soldering	min. 220℃, max. 60 sec.
Maximum temperature	260±5℃, max. 10sec.
Rework Temperature （hot air equipment）	350℃,3~5seconds
Termination Style	SMD
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

File Type	File Name
Company Profile	Walter_ Profile_ENG.pdf
	Walter_Profile_CN.pdf
	Walter_ Profile_JAP.pdf
Data Sheet	Walter_STE_M.pdf
Electronic	Walter_POWER_Fuses.pdf
	Walter_ Product_overview.pdf
	Walter_Components_Catalog.pdf
RoHs Report	ChiPCSRFuse系列ROHS A222011430810400101R1.pdf
	20220401 Current sensing resistor+A2220114308101010（华德）CSR RoHS(1).pdf
REACH Report	WALTER_REACH240

Lead time： Estimated delivery date when out of stock 2026-02-26

Quantity

Unit Price

$0.082246

$0.061685

100

$0.049348

500

$0.038382

Quantity

Unit Price

2000

$0.031528

5000

$0.023026

Online Inquiry

* Order quantity ：

MPQ：5000

MOQ： 5000

MOQ：5

When the purchase quantity is less than the inventory, you can purchase directly, the purchase quantity is: N * MOQ
When the purchase quantity is greater than the inventory, you need to order; when ordering, the purchase quantity is: N * MPQ

Order quantity

Unit Price

Count

Lead time： {{ (product.stock > 0 && product.num <= product.stock) ? 'In stock': 'Estimated delivery date ' + product.leadDate }}

Add to cart Buy it now

Product Recommendation Maker Dynamics Applications

Introduction to the NANO patch fuse 6125SH series The Walter Electronics NANO chip fuse 6125SH series is also a slow breaking fuse with good surge resistance. This article will comprehensively introduce the naming rules, selection parameters, electrical characteristics, and testing fuse conditions of the NANO patch fuse 6125SH series. Buy Walter patch fuse 6125SH series,go hnstshop Mall.

A comprehensive introduction to the parameters of Ralec brand alloy resistor series Ralec Alloy Resistors is a professional manufacturer of chip resistors, arrays, and metal current sensors, founded by Ralec Technology in 1994. This article provides a comprehensive introduction to the characteristics, advantages, and application areas of Ralec's alloy resistors and metal film alloy resistors.

Definition and characteristics of sampling resistance This article introduces the definition of sampling resistance, the characteristics of sampling resistance, and the parameters of sampling resistance. Sampling resistor is a component used in electronic circuits to sample and measure the current or voltage in the circuit. It is usually made of metal materials with specific resistance values and power bearing capacity. Sampling resistors are widely used in various electronic devices, including measuring instruments, power management, communication equipment, etc.

Detailed Introduction to TA-I Alloy Resistance RLP Series Dayi alloy resistor RLP is a high-power alloy resistor made of pure metal process, with extremely strong impact resistance and high reliability. The main volume of the Dayi RLP series includes three volumes: 251228174527, with a maximum power of 5W and a maximum resistance value of 680m Ω. This article provides a detailed introduction to the product selection parameters and application of the Dayi alloy resistance RLP series.

Introduction to the EBR series of TA-I shunt resistors The Dayi (TA-I) shunt resistor EBR series belongs to low resistance shunt resistors. Featuring ultra-low resistance and ultra-high power, the main materials used are strong copper and constantan. The main volume of the Dayi low resistance shunt resistor EBR series is 251239205930, with a minimum resistance value of 0.1mR (0.0001R) and a maximum power of 15W. It is widely used in BMS battery management systems and battery and current sampling circuits. This article provides a detailed introduction to the selection parameters of EBR low resistance shunt resistors.

WALTER STE-M-2010 Metal Foil Current Sensing Resistor Product Introduction The STE-M-2010 is a high-performance metal foil current sensing resistor belonging to the STE-M-series, specifically engineered for precise current detection in a wide range of electronic applications. Crafted with premium materials and advanced manufacturing techniques, this resistor delivers exceptional electrical stability, reliable performance, and excellent environmental adaptability. It adheres to strict quality standards, making it an ideal choice for scenarios that demand accurate current measurement and stable operation under various working conditions.

3.6 * 10 ceramic tube slow break fuse model parameter table 3.6 * 10 Ceramic Tube Slow Break Fuse Model Parameter Table Hnstshop Editor's Comprehensive Introduction to Walter Ceramic Museum Fuse 3.6 * 10 ICP Series. Suzhou Walter Electronics (Walter) is a professional manufacturer of ceramic tube fuses, and Hnstshopis its officially authorized distributor. The product models are complete, with sufficient stock, and the order delivery speed is super fast, with the fastest delivery time being one hour.

Series parameters and product application scheme of Every Ohms alloy resistors Ever Technology was founded in 1988 and has research and manufacturing capabilities for chip resistors and resistors. Alloy resistors are also a type of chip resistor, but they are mainly made of metal materials and have high power, low resistance, and high reliability. They are widely used in current sampling circuits and are therefore also known as current sampling resistors and current sensing resistors.

Application of the HTC3921 series of Huade wide electrode current detection resistors in new energy vehicles With the booming development of the new energy vehicle industry, the performance requirements of key components such as battery management systems, motor control systems, and on-board charging systems are also increasing. In these systems, wide electrode current detection resistors are very important.

Introduction to the Small Volume Alloy Resistor MSTC Series The Huade Walter electronic ultra-thin alloy resistance MSTC series adopts the FR4 process. The minimum volume of the Huade (Walter) electronic chip alloy resistor MSTC series can reach 02010402 or higher. The ultra-low resistance alloy resistor and ultra-thin material are suitable for mobile phones, tablets, Bluetooth and other products. Huanian Mall sells a full range of Huade Walter products, with sufficient stock and complete models, providing original technical support.

Product Recommendation Maker Dynamics Applications

WALTER Alloy Resistors: MHTC1206 Series Current Sensing Resistors Product Introduction The MHTC1206 Series Current Sensing Resistors are high-precision electronic components designed with a metal strip structure. Featuring long electrodes, two terminals, and no side electrodes, they have a size specification of 0.12×0.06 inches, specifically engineered for accurate current detection scenarios. Adopting MnCu alloy as the core material and advanced manufacturing processes, this series offers outstanding advantages such as low resistance, high precision, and high reliability, making it widely applicable in various electronic devices and circuit systems that require precise current monitoring.

WALTER Alloy Resistors: PMSH1206 Series Current Sensing Resistors Product Details The PMSH1206-Series is a high-performance Metal Strip Current Sensing Resistor designed with a compact structure and reliable performance. It features short electrodes, two terminals, and is made of pure metal, with a standard size of 0.12×0.06 inches. This series is engineered to meet the precise current sensing needs of various electronic devices, offering excellent electrical characteristics and strong environmental adaptability. Whether in industrial control systems, automotive electronics, or consumer electronic products, the PMSH1206-Series delivers stable and accurate current measurement support.

WALTER STE-M-2010 Metal Foil Current Sensing Resistor Product Introduction The STE-M-2010 is a high-performance metal foil current sensing resistor belonging to the STE-M-series, specifically engineered for precise current detection in a wide range of electronic applications. Crafted with premium materials and advanced manufacturing techniques, this resistor delivers exceptional electrical stability, reliable performance, and excellent environmental adaptability. It adheres to strict quality standards, making it an ideal choice for scenarios that demand accurate current measurement and stable operation under various working conditions.

Product Discontinuation Notice current fuses and thermal fuses have been designated for discontinuation.

Suzhou Walter launches new alloy resistor PMSB/PMSH series Suzhou Walter Electronics has launched a new series of pure metal alloy surface mount resistors PMSB/PMSH, with theme volumes of 1206 and 2512, using two materials: manganese copper (MuCu) and Kama. The products have high resistance to surge impact and low parasitic inductance, and are widely used in various power management systems and control systems.

MTT-T20A adds CQC safety certification, part number, silk screen and packaging change notification MTT-20A ceramic tube fuse has added CQC safety certification. The original product code MTT-T20A0V2T202300BG has been changed to MTT-T20A0V2T202300BM1G. The body has been added with CQC silk screen printing, and the outer packaging box has been added with CQC identification.

Introduction to the Huade Resistance Series and Product Application Fields Founded in Suzhou in 2000, Walder Electronics has developed a large number of alloy resistors that meet market demands in response to changes in the market. Below is an explanation of the parameters of different series of Walter alloy resistors, hoping to help engineers choose.

Glass tube fuse FSD series adds PSE safety certification The FSD series fuse is a disposable tubular fuse with a glass tube quick break type. This update adds PSE safety certification, which has no impact on the performance, quality, and other aspects of the original product. Suzhou Walter Electronics is a professional manufacturer of fuse brands. This update is aimed at expanding our products to more countries and regions, making them more versatile and widely available.

Product number：	R09-0603-R015F1UM11JSTE
Manufacturer Product Number：	STE0603MW50R015F
Manufacturer ：	WALTER
Series ：	WALTER-STEM
Type ：	Metal Current Sensing Chip Resistor
Size ：	0603
Resistance Value ：	0.015Ω(15mR)
Resistance Tolerance ：	±1%
TCR(ppm) ：	±50PPM
Resistance Power ：	1/2W（0.5W)
Description：	Metal Current Sensing Chip Resistor ,0603 ,0.015R(15mR) ,±1% ,1/2W ,MnCu ,±50PPM ,WALTER-STE

STE0603MW50R015F,WALTER,Metal Current Sensing Chip Resistor

STE0603MW50R015F

Series Introduce Find Similar

Series Introduce Find Similar

File

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

{{ isChinese?level2Category.viewNameCn:level2Category.viewNameEn }}

STE0603MW50R015F,WALTER,Metal Current Sensing Chip Resistor

STE0603MW50R015F

Series Introduce Find Similar

Series Introduce Find Similar

File

Related Series

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications