STEJ2512_WALTER_Metal Current Sensing Chip Resistor_2512_0Ω_Parameters_ Price

Attribute Name	Attribute Value
Manufacturer	WALTER
Product Series	WALTER-STEJ
Product Type	Metal Current Sensing Chip Resistor
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)
Structure &Material
Substrate	Alumina Ceramic
Adhesion layer	Epoxy
Resistive element	Cu alloy
Terminal electrode	Cu / Ni / Sn
Protective coating	Flame-retardant epoxy
Marking coating	Flame-retardant epoxy
Environmental Characteristics
Operating Temperature	-55℃～170℃
Storage Conditions	10℃~40℃
Soldering Parameters
Preheating	145 ± 15℃, max. 120 sec
Soldering	min. 220℃, max. 60 sec.
Maximum temperature	260±5℃, max. 10sec.
Rework Temperature （hot air equipment）	350℃,3~5seconds

File Type	File Name
Company Profile	Walter_ Profile_ENG.pdf
	Walter_Profile_CN.pdf
	Walter_ Profile_JAP.pdf
Data Sheet	WALTER_STEJ.pdf
Electronic	Walter_Components_Catalog.pdf
	Walter_ Product_overview.pdf
	Walter_POWER_Fuses.pdf
REACH Report	WALTER_REACH240

Lead time： Estimated delivery date 2026-03-04

Quantity

Unit Price

$0.139407

$0.097574

200

$0.080543

500

$0.066600

Quantity

Unit Price

1000

$0.054208

3000

$0.044917

Online Inquiry

* Order quantity ：

MPQ：4000

MOQ： 4000

MOQ：5

When the purchase quantity is less than the inventory, you can purchase directly, the purchase quantity is: N * MOQ
When the purchase quantity is greater than the inventory, you need to order; when ordering, the purchase quantity is: N * MPQ

Order quantity

Unit Price

Count

Lead time： {{ (product.stock > 0 && product.num <= product.stock) ? 'In stock': 'Estimated delivery date ' + product.leadDate }}

Add to cart Buy it now

Product Recommendation Maker Dynamics Applications

Application of the HTC3921 series of Huade wide electrode current detection resistors in new energy vehicles With the booming development of the new energy vehicle industry, the performance requirements of key components such as battery management systems, motor control systems, and on-board charging systems are also increasing. In these systems, wide electrode current detection resistors are very important.

Introduction to the RLFC series of current sensing resistors with four terminals according to vehicle regulations The TA-i four terminal current sensing resistor RLFC series is a pure metal plate current sensing resistor, also known as alloy current sensing resistor because it is a pure metal process resistor. The RLFC series meets the automotive industry certification standards and belongs to the automotive grade current sensing resistor category. The RLFC series is widely used in the automotive resistor and other markets. This article provides a detailed introduction to the characteristics of the RLFC series products, as well as their application markets and product selection parameters.

Specification and Characteristics of MFR Metal Foil Low Resistance Resistors The Ever ohms Metal Foil Low Resistance Resistor MFR series is a type of alloy resistance, with copper alloy as the main resistance material. Has low sensitivity value, low TCR value, and long-term stability. The EVER OHMS metal foil low resistance SMT resistor MFR series is widely used in various current detection circuits. Below, the Huanian editor provides a detailed introduction to the low resistance resistance resistance specifications and characteristics of EVER OHMS MFR metal foil.

Introduction to SMD fuse 1206T slow break series Hnstshop Mall will comprehensively introduce the Huadduce the selection parameters and electrical performance of the 1206T slow break series SMD fuse.

Introduction to the Huade Resistance Series and Product Application Fields Founded in Suzhou in 2000, Walder Electronics has developed a large number of alloy resistors that meet market demands in response to changes in the market. Below is an explanation of the parameters of different series of Walter alloy resistors, hoping to help engineers choose.

Introduction to the MFL series of Fenghua High tech (FH) alloy chip fixed resistors The Fenghua High tech (FH) alloy chip fixed resistor MFL uses the Metal Foil process, and its core material is an alloy and ceramic substrate, so it is also called an alloy resistor, which plays a role in current detection in circuits, and is also known as a current detection resistor. The main product characteristics of MFL alloy chip fixed resistors include low resistance value, high power, and ground temperature coefficient. This article provides a detailed introduction to the product characteristics and selection manual of the Fenghua High tech (FH) alloy chip fixed resistor MFL series.

Introduction to Long Electrode Alloy Resistance HTC Series Next, we will introduce the long electrode alloy resistance HTC series of Suzhou Walter from the aspects of product characteristics, product Naming convention, model selection, resistance range table and test performance. Long electrode alloy resistors also have different solder pads and functions. Huade Walter Electronics has two series of long electrode resistors, HTE and HTC series. The HTE series has side guides, which provide better soldering effect and facilitate the inspection of false soldering. The HTC series is widely used in Japan and Europe and America, and soldering can increase the spatial distance between the resistor and PCBA, which is more conducive to heat dissipation.

WALTER STE-M-2010 Metal Foil Current Sensing Resistor Product Introduction The STE-M-2010 is a high-performance metal foil current sensing resistor belonging to the STE-M-series, specifically engineered for precise current detection in a wide range of electronic applications. Crafted with premium materials and advanced manufacturing techniques, this resistor delivers exceptional electrical stability, reliable performance, and excellent environmental adaptability. It adheres to strict quality standards, making it an ideal choice for scenarios that demand accurate current measurement and stable operation under various working conditions.

Introduction to the Small Volume Alloy Resistor MSTC Series The Huade Walter electronic ultra-thin alloy resistance MSTC series adopts the FR4 process. The minimum volume of the Huade (Walter) electronic chip alloy resistor MSTC series can reach 02010402 or higher. The ultra-low resistance alloy resistor and ultra-thin material are suitable for mobile phones, tablets, Bluetooth and other products. Huanian Mall sells a full range of Huade Walter products, with sufficient stock and complete models, providing original technical support.

Introduction to MQR Metal Foil Low Resistance Vehicle Gauge Resistors The MQR metal foil low resistance resistor from EVER Ohms is a type of automotive standard resistor that meets the certification of automotive regulations. It is widely used in non safety unit applications such as car lights and entertainment. MQR automotive grade metal foil low resistance resistors have long-term stability, low inductance, and low temperature drift TCR. Hua Nian's editor will comprehensively introduce the characteristics and selection parameters of the MQR series metal foil patch sampling resistors.

Product Recommendation Maker Dynamics Applications

Suzhou Walter Electronics' latest price increase notice 2026 version Suzhou Walter Electronics Co., Ltd. was established in 2000 and is a brand manufacturer of fuses, resistors, leakage current sensors, NTC thermistors, and other products. Due to the sharp increase in raw material prices, we hereby raise the prices.

WALTER Alloy Resistors: MHTC1206 Series Current Sensing Resistors Product Introduction The MHTC1206 Series Current Sensing Resistors are high-precision electronic components designed with a metal strip structure. Featuring long electrodes, two terminals, and no side electrodes, they have a size specification of 0.12×0.06 inches, specifically engineered for accurate current detection scenarios. Adopting MnCu alloy as the core material and advanced manufacturing processes, this series offers outstanding advantages such as low resistance, high precision, and high reliability, making it widely applicable in various electronic devices and circuit systems that require precise current monitoring.

WALTER Alloy Resistors: PMSH1206 Series Current Sensing Resistors Product Details The PMSH1206-Series is a high-performance Metal Strip Current Sensing Resistor designed with a compact structure and reliable performance. It features short electrodes, two terminals, and is made of pure metal, with a standard size of 0.12×0.06 inches. This series is engineered to meet the precise current sensing needs of various electronic devices, offering excellent electrical characteristics and strong environmental adaptability. Whether in industrial control systems, automotive electronics, or consumer electronic products, the PMSH1206-Series delivers stable and accurate current measurement support.

WALTER STE-M-2010 Metal Foil Current Sensing Resistor Product Introduction The STE-M-2010 is a high-performance metal foil current sensing resistor belonging to the STE-M-series, specifically engineered for precise current detection in a wide range of electronic applications. Crafted with premium materials and advanced manufacturing techniques, this resistor delivers exceptional electrical stability, reliable performance, and excellent environmental adaptability. It adheres to strict quality standards, making it an ideal choice for scenarios that demand accurate current measurement and stable operation under various working conditions.

Product Discontinuation Notice current fuses and thermal fuses have been designated for discontinuation.

Suzhou Walter launches new alloy resistor PMSB/PMSH series Suzhou Walter Electronics has launched a new series of pure metal alloy surface mount resistors PMSB/PMSH, with theme volumes of 1206 and 2512, using two materials: manganese copper (MuCu) and Kama. The products have high resistance to surge impact and low parasitic inductance, and are widely used in various power management systems and control systems.

MTT-T20A adds CQC safety certification, part number, silk screen and packaging change notification MTT-20A ceramic tube fuse has added CQC safety certification. The original product code MTT-T20A0V2T202300BG has been changed to MTT-T20A0V2T202300BM1G. The body has been added with CQC silk screen printing, and the outer packaging box has been added with CQC identification.

Introduction to the Huade Resistance Series and Product Application Fields Founded in Suzhou in 2000, Walder Electronics has developed a large number of alloy resistors that meet market demands in response to changes in the market. Below is an explanation of the parameters of different series of Walter alloy resistors, hoping to help engineers choose.

Product number：	R09-2512-0R000000000STE
Manufacturer Product Number：	STEJ2512
Manufacturer ：	WALTER
Series ：	WALTER-STEJ
Type ：	Metal Current Sensing Chip Resistor
Size ：	2512
Resistance Value ：	0Ω
Resistance Power ：	2W
Description：	Metal Current Sensing Chip Resistor ,2512 ,0R ,- ,- ,- ,- ,WALTER-STE

STEJ2512,WALTER,Metal Current Sensing Chip Resistor

STEJ2512

Series Introduce Find Similar

Series Introduce Find Similar

File

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

{{ isChinese?level2Category.viewNameCn:level2Category.viewNameEn }}

STEJ2512,WALTER,Metal Current Sensing Chip Resistor

STEJ2512

Series Introduce Find Similar

Series Introduce Find Similar

File

Related Series

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications