Cart
{{cartCount}}
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。
Viking Technology was founded in 1997 and is located in the Hsinchu Science Park in Taiwan. It is the first professional manufacturer in Taiwan to combine thin film/thick film process technology with high-frequency passive component/module design and development capabilities. Guangjie Technology is also an earlier manufacturer of alloy resistance brands in Taiwan, China, China. Its products are rich in categories and can be selected widely, which is suitable for use in various electronic products. This article introduces in detail the series parameters, product advantages, product applications, etc. of Guangjie alloy resistance.
The light sensing low ohm metal sheet resistor CSM is a type of metal foil alloy resistor. The power of CSM Western Europe's low ohm metal foil strip resistors is twice that of ordinary thick film resistors. Dimensions range from 0402 to 2512, 1%, 5%, resistance ranges from 10m to 2000mohm, low TC is 50/100ppm. The 1206 size 1W and 0402 size 1/4CSM series use metal foil resistance elements, installed on ceramic substrates, which have excellent thermal conductivity and can enhance power. The metal foil current sensing resistor meets the accuracy and stability of critical power management design. Compared to the thick film process, it has better performance in small sizes (such as 04020603) and is cost-effective with market competitiveness.
The Viking LRJ series is a metal alloy 0 ohm jumper alloy resistor. Metal alloy 0 ohm jumper resistor, suitable for ultra-low resistance below 0.5 ohms in sizes 0402~0805, and ultra-low impedance below 0.2 ohms in sizes 12062010, suitable for high current applications. Our LRJ seires are true metal alloy plate zero ohm resistors, making them a great choice for smaller space and lower cost than DIP jumper heads. This metal jumper is designed for extremely low impedance and contour circuit connections as a zero ohm resistor.
The Viking LRP series belongs to low ohm metal strip alloy resistors, also known as pure metal alloy resistors. LRP1206 ultra-high power 1W, LRP2512 3W surface mounted power metal strip resistor. Metal strip with low ohmic resistance, used to induce large currents and resistant to high temperatures. Low TCR enables stable resistance drift at high temperatures. The resistance range is wide, up to 200 ohms. It can withstand high temperature performance up to 170/° C. Metal strip resistors can provide 5 times the rated power, with short usage time and high reliability. An excellent solution for saving space for high-power rather than thick film, with competitive cost-effectiveness in the market.
The Viking LR series is an ultra-low ohm metal strip type alloy resistor. The LR series has a maximum rated power of 2512 3W and 1206 1W, with surface mounted power metal strip resistors. The resistance range is 0.5m-10mohm, and the batch TC is 50ppm. Metal strip with low ohmic resistance, used to induce large currents and resistant to high temperatures. TCR is low and has stable resistance drift at high temperatures. It can withstand high temperature performance up to 170/° C. Metal strip resistors can provide 5 times the rated power, with short usage time and high reliability. An excellent solution for saving space for high-power rather than thick film, with competitive cost-effectiveness in the market.
The MF series of Viking metal foil alloy resistors can provide twice the power of typical thick film resistors. Dimensions range from 0603 to 2512, 1%, 5%, resistance ranges from 20m to 200mohm, low TC is 50/100ppm. 1W for size 1206 and 1/2W for size 0603. The MF series uses metal foil resistance elements, installed on ceramic substrates, which have excellent thermal conductivity and can enhance power. The metal foil current sensing resistor meets the accuracy and stability of critical power management design. Performance is superior to thick film technology, with high cost-effectiveness and market competitiveness.
The Viking CSW series is a wide terminal current sensing chip resistor, also known as a wide electrode thick film mount resistor. The CSW series mainly has low resistance values and is also known as a wide electrode current detection resistor. It mainly plays a role in current detection in circuits. The CSW wide terminal current sensing chip has high power, very stable resistance, and low thermal resistance, which is an important key to achieving a powerful power supply. The reverse geometry chip resistor provides a wider terminal on the long side of the chip, providing significant advantages in current processing and thermal resistance, which helps reduce PCB temperature to achieve higher power. Our CS series offers dimensions of 1225/0612/3720/7520, suitable for a full resistance range from 1 ohm to 1 ohm.
Viking thin film technology is used for high-precision current sensing resistors with very low TCR. Dimensions range from 0402 to 2512. The resistance range is 50m-1 Rohm. 2512 1W provides high power. Viking TCS is a high-precision current sensing resistor belonging to thin film technology, as well as a low resistance SMT resistor. Hua Nian Mall editor will provide you with a detailed introduction to the characteristics and selection parameters of TCS thin film current sensing resistors.
The Viking RS series current sensing resistor is a general purpose thick film current sensing (low resistance thick film patch resistor), with dimensions ranging from 0402 to 2512 and a resistance range of 10m to 1R. Low cost. Fast delivery. Highly reliable current detection resistor. It has characteristics such as low sensitivity and high power. This article provides a detailed introduction to the main product features and product selection parameters of the RS series.
The CSN series of Guangjie Technology belongs to the category of ordinary thick film current sensing resistors. Thick film current sensing, with a precision tolerance of 1%, dimensions ranging from 0805 to 2512, and a resistance range of 39m to 1R. Highly reliable current detection resistor. This article provides a detailed introduction to the product characteristics and selection parameters of the CSN series current sensing chip resistors.
