NXP battery sensor MM9Z1_638 with CAN and LIN. The NXP battery sensor MM9Z1_638 with CAN and LIN battery sensor IC can measure voltage, current, and temperature, minimizing power consumption without compromising accuracy or data processing capabilities. These solutions comply with automotive industry standards and are suitable for in vehicle battery monitoring applications.
NXP's battery sensor MM912_637 is used for 12V lead-acid batteries and has a LIN interface battery sensor. NXP's battery sensor IC is capable of measuring voltage, current, and temperature, minimizing power consumption without compromising accuracy or data processing capabilities. These solutions comply with automotive industry standards and are suitable for in vehicle battery monitoring applications.
NXP battery cell controller MC33772C, 6-channel lithium-ion battery controller IC MC33772C is a lithium-ion battery controller IC designed for automotive and industrial control applications such as HEV, EV, ESS, and UPS systems.
The main product models of NXP battery sensors are: MC33772C, MM912_637,MM9Z1_638。 NXP Battery Management: Lithium ion (Li ion) and lead-acid batteries require precise charging current and output voltage to meet automotive and industrial standards. Vehicle grade battery controllers are the ideal choice for automotive battery management.
NXP's MC34673 is a 1.2 single cell lithium-ion battery/lithium polymer battery charging IC. MC34673 has a 2.6V power on reset (POR) falling edge threshold, allowing it to work perfectly with current limiting power supplies. Three indicator pins (PPR, CHG, and FAST) can be easily connected to a microprocessor or LED. When the power supply is not connected or disabled, the charger consumes less than 1.0 µ A of battery current.
MC34671 is a cost-effective fully integrated charger suitable for lithium-ion or lithium polymer batteries. It can withstand an input voltage of 28V, eliminating the need for input overvoltage protection circuits in handheld devices. A charging cycle includes three charging modes: trickle, constant current (CC), and constant voltage (CV).
The battery charger PCA9482 chip is a 7A 2:1 single cell battery switch capacitor charger chip IC. PCA9482UK is a highly integrated switch capacitor converter with an embedded OVPFET that provides twice the output current for fast charging applications using single cell batteries. This device can operate in a 2:1 switching mode, with very high efficiency (>96.5%, at VVOUT=4V, IVOUT=5A), and can run in a 1:2 switching mode or in a forward and reverse 1:1 mode.
NXP battery charger IC chip array product introduction. The NXP battery charger IC chip provides precise charging current and output voltage, optimizing the usage time and performance of lithium-ion (Li Ion) and lead-acid batteries. Our battery product portfolio includes sensor ICs, cell controller ICs, and charger ICs, providing excellent performance, precision, and configuration flexibility in the industry.
The NXP battery cell controller MC33775 is a 14 channel lithium-ion battery controller IC ASIL D. MC33775A is a lithium battery controller IC designed for automotive and industrial control applications such as HEV and ESS.
The NXP battery cell controller MC33774 is an 18 channel lithium-ion battery cell controller IC. MC33774A is a lithium battery controller IC designed for automotive and industrial applications.