Murata Co., Ltd. has developed the world's first ultra small 006003 inch (0.16mmx0.08mm) multilayer ceramic capacitor. Compared with the existing ultra small product 008004 inch (0.25mmx0.125mm), the volume has been reduced by about 75%.
Murata Co., Ltd. has expanded its series of PTC thermistors with a size of 0603M (0.6 × 0.3 × 0.3mm) for overheating detection, specifically designed for mobile devices and vehicles. It has also added products with a nominal resistance of 1k Ω and sensing temperatures of 105 ℃ and 115 ℃. This product is scheduled to start mass production from October.
Murata Co., Ltd. has developed the "FlexiBK series (PE24110)" high-efficiency DC-DC converter IC, capable of 3.3 input voltage and an output limit of 12A, for low rise applications below 1.2mm. This product is available in a 4.0 × 3.2mm QFN (Quad Flat No led package) package, suitable for thin applications below 1.2mm.
Murata Manufacturing Co., Ltd. has developed a 0603M size (0.6 × 0.3 × 0.3mm) copper electrode negative temperature coefficient (NTC) thermistor, with models "NCU03XH103F6SRL" and "NCU03XH103F60RL". This new product expands the size lineup of the NCU series and meets the high-density and miniaturized requirements of circuit boards in the automotive market, as well as the high reliability requirements for electronic components. Mass production has begun and samples can be provided.
When using discrete components to form energy storage circuits, it takes time to adjust constants. Therefore, Murata's Radisol device has pre assumed antenna combinations that may require countermeasures and prepared a rich product lineup of 11 types. Murata's Radisol antenna anti-interference device is suitable for small, multi antenna terminal devices such as smartphones, smartwatches, and wearable devices.
Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first (1) "antenna anti-interference device 'Radisol'", which is a new product that can be equipped on antennas to suppress wireless performance degradation. Mass production will begin in June 2024. Mainly used in portable communication products such as wearables and smartphones.
Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first multi-layer ceramic capacitor with a size of 1608M (1.6 × 0.8mm) and an electrostatic capacity of up to 100 µ F (hereinafter referred to as "this product"). The "GRM188C80E107M" with a rated voltage of 2.5Vdc, a working temperature of up to 105 ° C, and a temperature characteristic of X6S (1), and the "GRM188R60E107M" with a working temperature of up to 85 ° C and a temperature characteristic of X5R (2) have started mass production. In addition, the product (3) with a rated voltage of 4VDC and a working temperature of up to 85 ° C is planned to start mass production in 2025.
Murata Manufacturing Co., Ltd. has developed a new low loss multilayer ceramic capacitor (MLCC) that supports a rated voltage of 100V and has an ultra small size of 0402M (0.4 x 0.2mm). It is mainly used for wireless communication modules and will begin mass production in February 2024.
Words such as BAS and BEMS are often used in the management of smart buildings. These two terms are indispensable technical terms in building management, and their meanings and relationships are explained here.
Murata Corporation has developed Murata's first (1) support while holding LoRaWAN ® (2) The communication module "Type 2GT" for satellite communication. It can be used for various IoT devices such as smart agriculture, environmental sensing, and smart homes. Mass production began in March 2024.