HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

walter Alloy resistance current diverter SMD fuse Precision resistor ever ohms fuse

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

LQW18ANR15G00D,MURATA,Wire Wound Chip Inductors

LQW18ANR15G00D

Wire Wound Chip Inductors ,0603(1.6*0.8mm) ,150nH ,±2% ,160mA ,Chip SMD ,MURATA-LQW

✖

The image is for reference only, please refer to the drawing for details

Product number：	L01-0603-R15GA160SLW
Manufacturer Product Number：	LQW18ANR15G00D
Manufacturer ：	MURATA
Series ：	MURATA-LQW
Type ：	Wire Wound Chip Inductors
Size ：	0603
Value ：	150nH
Tolerance ：	±2%
Rated Current ：	0.16A
DC resistance ：	1.5R
Description：	Wire Wound Chip Inductors ,0603(1.6*0.8mm) ,150nH ,±2% ,160mA ,Chip SMD ,MURATA-LQW

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	MURATA
Product Series	MURATA-LQW
Product Type	Wire Wound Chip Inductors
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date when out of stock 2026-08-13

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Do we need to lay copper foil underneath the inductor for DC-DC power supply? Inductors have alternating current, and laying copper at the bottom of the inductor will generate eddy currents on the ground plane. The eddy current effect will affect the inductance of the power inductor, and eddy currents will also increase system losses. At the same time, the noise generated by alternating current will increase the noise on the ground plane, which will affect the stability of other signals. From the perspective of EMC, laying copper on the bottom of the inductor and a complete ground surface is beneficial for EMI design; The current production process of inductors has been upgraded, and shielded inductors are used. There are very few leaked magnetic induction lines, which have little impact on the inductance of the inductors and are also beneficial for heat dissipation.

0.1uF (100nF) capacitors may not necessarily be suitable for filtering circuits Filter capacitors play a very important role in switching power supplies, and how to correctly select filter capacitors, especially the selection of output filter capacitors, is a concern for every engineering and technical personnel. On the power filtering circuit, we can see various capacitors with different capacitance values, such as 100uF, 10uF, 100nF, 10nF, etc. How are these parameters determined? In the future, don't see capacitors with 0.1uF capacitance placed in everything. In some high-speed systems, these 0.1uF capacitors simply won't work.

Murata is the first to launch 006003 Ultra Small Volume Chip Capacitor (MLCC) Murata Co., Ltd. has developed the world's first ultra small 006003 inch (0.16mmx0.08mm) multilayer ceramic capacitor. Compared with the existing ultra small product 008004 inch (0.25mmx0.125mm), the volume has been reduced by about 75%.

Murata officially mass-produced 0603 (1608) volume, 100UF high-capacity MLCC laminated ceramics Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first multi-layer ceramic capacitor with a size of 1608M (1.6 × 0.8mm) and an electrostatic capacity of up to 100 µ F (hereinafter referred to as "this product"). The "GRM188C80E107M" with a rated voltage of 2.5Vdc, a working temperature of up to 105 ° C, and a temperature characteristic of X6S (1), and the "GRM188R60E107M" with a working temperature of up to 85 ° C and a temperature characteristic of X5R (2) have started mass production. In addition, the product (3) with a rated voltage of 4VDC and a working temperature of up to 85 ° C is planned to start mass production in 2025.

10 µ F/50Vdc/0805 inch MLCC mass-produced GCM21BE71H106KE02 Murata Manufacturing Co., Ltd. has developed a multi-layer ceramic capacitor (MLCC) for the automotive market, which is Murata's first product (Murata survey results, as of June 25, 2025) with a size of 0805 inches (2.0 × 1.25mm), a rated voltage of 50Vdc, and a capacitance of 10 µ F. The new product code is GCM21BE71H106KE02 and has started mass production.

Murata expands 0603M (0.6 * 0.3 * 0.3mm) PTC thermistor to 1K Murata Co., Ltd. has expanded its series of PTC thermistors with a size of 0603M (0.6 × 0.3 × 0.3mm) for overheating detection, specifically designed for mobile devices and vehicles. It has also added products with a nominal resistance of 1k Ω and sensing temperatures of 105 ℃ and 115 ℃. This product is scheduled to start mass production from October.

What are Murata's products suitable for medical applications? With the changes in the healthcare market environment, personal healthcare devices used for daily health management have also been affected. These products are smaller in size and support cloud connectivity. Murata's product features: By utilizing compact universal components (capacitors, inductors, etc.), we manufacture compact products with higher design freedom. Utilize Bluetooth Intelligent modules and wireless communication modules that support near-field communication (NFC) make it easier to manufacture daily health monitoring products with network connectivity capabilities.

Murata won IEEE Milestone Award Commercialization of MLCC using nickel internal electrodes. Murata Manufacturing Co., Ltd. commercialized multi-layer ceramic capacitors (Ni MLCC) using nickel internal electrodes, making contributions to industrial development. As a result, it was awarded the International Society for Electrical and Electronics (IEEE), The Institute of Electrical and Electronics Engineers, Inc. awarded the IEEE Milestone Award.

Murata capacitor 0402M ultra small volume (0.4 * 0.2mm), withstand voltage 100V capacitor in mass production Murata Manufacturing Co., Ltd. has developed a new low loss multilayer ceramic capacitor (MLCC) that supports a rated voltage of 100V and has an ultra small size of 0402M (0.4 x 0.2mm). It is mainly used for wireless communication modules and will begin mass production in February 2024.

USB4 noise reduction measures and verification solutions - practical operation Murata will provide a complete solution for USB noise reduction measures and verification from the following six aspects. 1. A brief history of USB. What noise issues may occur with USB4. 3. Noise reduction: How to apply CMCC is crucial (recommended CMCC products from Murata: NFG0QHB372HS2/NFG0QHB542HS2). 4. Evaluation of radiated noise. 5. Internal EMC assessment and response measures. 6. Signal integrity confirmation.

Product Recommendation Maker Dynamics Applications

10 µ F/50Vdc/0805 inch MLCC mass-produced GCM21BE71H106KE02 Murata Manufacturing Co., Ltd. has developed a multi-layer ceramic capacitor (MLCC) for the automotive market, which is Murata's first product (Murata survey results, as of June 25, 2025) with a size of 0805 inches (2.0 × 1.25mm), a rated voltage of 50Vdc, and a capacitance of 10 µ F. The new product code is GCM21BE71H106KE02 and has started mass production.

Murata is the first to launch 006003 Ultra Small Volume Chip Capacitor (MLCC) Murata Co., Ltd. has developed the world's first ultra small 006003 inch (0.16mmx0.08mm) multilayer ceramic capacitor. Compared with the existing ultra small product 008004 inch (0.25mmx0.125mm), the volume has been reduced by about 75%.

Murata expands 0603M (0.6 * 0.3 * 0.3mm) PTC thermistor to 1K Murata Co., Ltd. has expanded its series of PTC thermistors with a size of 0603M (0.6 × 0.3 × 0.3mm) for overheating detection, specifically designed for mobile devices and vehicles. It has also added products with a nominal resistance of 1k Ω and sensing temperatures of 105 ℃ and 115 ℃. This product is scheduled to start mass production from October.

Murata's ultra-thin DC-DC power management chip PE24110 is in mass production Murata Co., Ltd. has developed the "FlexiBK series (PE24110)" high-efficiency DC-DC converter IC, capable of 3.3 input voltage and an output limit of 12A, for low rise applications below 1.2mm. This product is available in a 4.0 × 3.2mm QFN (Quad Flat No led package) package, suitable for thin applications below 1.2mm.

Murata's new product: 0603M series thermistor, suitable for automotive electronics Murata Manufacturing Co., Ltd. has developed a 0603M size (0.6 × 0.3 × 0.3mm) copper electrode negative temperature coefficient (NTC) thermistor, with models "NCU03XH103F6SRL" and "NCU03XH103F60RL". This new product expands the size lineup of the NCU series and meets the high-density and miniaturized requirements of circuit boards in the automotive market, as well as the high reliability requirements for electronic components. Mass production has begun and samples can be provided.

Murata's Radisol antenna anti-interference device new product recommendation When using discrete components to form energy storage circuits, it takes time to adjust constants. Therefore, Murata's Radisol device has pre assumed antenna combinations that may require countermeasures and prepared a rich product lineup of 11 types. Murata's Radisol antenna anti-interference device is suitable for small, multi antenna terminal devices such as smartphones, smartwatches, and wearable devices.

Murata has developed Murata's first small 0603 size antenna anti-interference device, "Radisol" Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first (1) "antenna anti-interference device 'Radisol'", which is a new product that can be equipped on antennas to suppress wireless performance degradation. Mass production will begin in June 2024. Mainly used in portable communication products such as wearables and smartphones.

Murata officially mass-produced 0603 (1608) volume, 100UF high-capacity MLCC laminated ceramics Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed Murata's first multi-layer ceramic capacitor with a size of 1608M (1.6 × 0.8mm) and an electrostatic capacity of up to 100 µ F (hereinafter referred to as "this product"). The "GRM188C80E107M" with a rated voltage of 2.5Vdc, a working temperature of up to 105 ° C, and a temperature characteristic of X6S (1), and the "GRM188R60E107M" with a working temperature of up to 85 ° C and a temperature characteristic of X5R (2) have started mass production. In addition, the product (3) with a rated voltage of 4VDC and a working temperature of up to 85 ° C is planned to start mass production in 2025.

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}