HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

fuse walter current diverter SMD fuse Precision resistor Alloy resistance ever ohms

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

DK400LED02,CJ,Schottky Diodes

DK400LED02

Schottky Diodes ,DK400LED02 ,VR:80V ,IO:100mA ,VF:1.2V ,PD:100mW ,WBFBP-02C

✖

The image is for reference only, please refer to the drawing for details

Product number：	DK-K19980V0A100290313CJ
Manufacturer Product Number：	DK400LED02
Manufacturer ：	CJ
Series ：	CJ-Schottky Diodes
Product Type ：	Schottky Diodes
Voltage(VR) ：	80V
Current (IO) ：	100mA
Forward Voltage(VF) ：	1.2V
Power dissipation(Pd）：	100mW
Packge ：	WBFBP-02C(1.0×0.6×0.5)
Description：	Schottky Diodes ,DK400LED02 ,VR:80V ,IO:100mA ,VF:1.2V ,PD:100mW ,WBFBP-02C

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-Schottky Diodes
Product Type	Schottky Diodes
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-06-19

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Instructions for using silicon carbide (SiC) diodes When using silicon carbide (SiC) diodes, some safety factors should be taken into account, such as avoiding excessive current flowing through the diode to prevent damage. During use, attention should also be paid to circuit design and diode selection to ensure optimal system performance.

Why does high negative pressure in SiC MOS affect threshold drift The threshold drift of SiC MOSFET is affected by negative pressure because this device has a high leakage current, which reduces the difference between the control terminal voltage and the source terminal voltage, thereby affecting the switching performance of MOSFET. In addition, high negative pressure may also cause MOSFETs to enter rupture mode and trigger other adverse effects.

Combination of Silicon Carbide (SiC) Power Management Solutions Silicon carbide solutions support the replacement of aircraft's pneumatic and hydraulic systems with smaller, lighter, and more efficient electrical solutions to power onboard AC generators, actuators, and auxiliary power units (APU). This type of solution can also reduce the maintenance requirements of these systems. However, the most significant contribution of SiC technology lies in its mission to electrify commercial transport vehicles, which are one of the world's largest sources of GHG emissions. With the advent of 1700V metal oxide semiconductor field-effect transistors (MOSFETs) and configurable digital gate drive technology, today's SiC solutions enable designers to generate maximum productivity with minimal energy consumption for these systems.

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

What is SiC MOSFET? SIC MOSFET (Silicon Carbide MOSFET) is a new type of semiconductor device with high thermal stability, high conductivity, and high frequency characteristics. Learning SIC MOSFET includes the following aspects:

The difference between Schottky diodes and silicon carbide Schottky diodes Schottky diodes and silicon carbide Schottky diodes are two different types of diodes.

Calculation method and formula for MOS transistor losses The losses of MOS transistors can be estimated by calculating their current losses and power losses. Current loss refers to the loss caused by the passage of current inside a MOS transistor, which is due to the resistance loss between electrons and the silicon substrate when passing through the MOS transistor. This loss can be calculated using the following formula:

Voltage drop factors of silicon carbide (SiC) diodes The voltage drop of silicon carbide (SiC) diodes refers to the electromotive force difference of SiC diodes. Silicon carbide diode is a semiconductor device with a P-N junction structure that can be used to control current or voltage. The voltage drop of a diode refers to the electromotive force difference between the P-N junction of the diode in the forward conducting state, that is, the forward bias voltage. This is due to the potential difference between the contact surfaces in the diode.

The working environment and application market of SiGaNSiC MOSFETs and Si IGBTs Compared with MOSFET, SiC perfectly solves the problem of difficult simultaneous implementation of high voltage and high frequency in silicon-based materials. Based on compatibility with high voltage and medium frequency, SiC MOSFET has become the optimal solution for electric vehicles, charging stations, and photovoltaic inverters (without considering cost) due to its high efficiency and small size;

What are the differences between SiC SBD and SiC MOSFET? SiC SBD and SiC MOSFET are chips made of polarized silicon carbide material, which have high heat dissipation and conductivity. The difference lies in:

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}