Cart
{{cartCount}}
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。
大疆新推出的DJI POWER 1000户外电源，内置1024Wh磷酸铁锂电池，支持2200W输出功率，并具备UPS功能，支持通过SDC接口连接太阳能电池板和车充充电。DJI POWER 1000户外电源支持1200W快充模式和600W普通模式充电，快速模式50分钟即可将电源充至80%电量，约70分钟完全充满。
The EHOM brand EP1650-3 outdoor power supply has a built-in 1024Wh lithium iron phosphate battery, and the measured weight of the whole machine is about 13.7kg. The rated output power of the power supply is 1650W, with a peak output power of 2700W. It is a pure sine wave output and has three new national standard output interfaces. This outdoor power supply uses a large number of well-known brand electronic components, such as Zhirong's protocol chip SW3516P, Zhaoyi's innovative GD32F303RCT6, Renesas ISL81601, Yineng's ESR bare copper shunt resistor, Zhongying's SH367309, Beiling memory model BL24C256 and voltage regulator chip BL1084, etc.
After dismantling the new generation 1000 Pro energy storage power supply of the electric scooter, it was discovered that so many fuses and alloy resistors were used! For example, ESR3920 0.002R (2mR), 2512 0.002R (2mR), disposable fuses include 1032 60A and 2410 15A, and so on.
ETAKER Mobile Outdoor Power Supply is a rapidly emerging portable energy storage power supply that is convenient for outdoor travel and home emergency energy storage solutions. What specifications of alloy resistors and fuses are needed for a 2000W outdoor power supply from ETAKER Mobile, using a total of EMA25F3W0R001MDG, EMA25F3W0R003MDG，EMA25F3W0R005MDG，EMA25F3W0R04MDG，EMA25F3W0R010MDG， And there are 40A, 25A, and 60A in 2410 volume and 1032 volume, as well as a ceramic tube fuse TSC-T20AH250V (Content and Image Source: Charging Head)
ESR bare copper shunt resistors are mainly characterized by low resistance, high power, and low temperature drift, and are widely used in current sampling circuits. In current sampling circuits, the stability requirements for resistors are extremely strict. Therefore, different product materials have different product characteristics and application markets. With the market demand for product miniaturization, low power consumption, and fast charging and discharging, ELLON has launched a small volume high-power bare copper shunt resistor. This article provides a detailed introduction to the corresponding specification parameters.
The Fenghua (FH) low resistance shunt resistor AMS series products are low resistance shunt resistors that belong to the automotive certification standard and comply with AEC-Q200 automotive certification. Using bare copper electron beam welding technology, it has characteristics such as ultra-low resistance and ultra-high power, and is widely used in automotive electronics, new energy, energy storage, industrial automation and other products. This article provides a detailed introduction to the product characteristics, selection parameters, and mass production models of AMS series low resistance shunt resistors.
Fenghua (FH) bare copper splitter low resistance resistance resistance MS series product selection model parameter list. The Fenghua bare copper splitter resistance MS series is a pure metal resistor with ultra-low resistance and high power characteristics, with a minimum resistance value of 0.1m Ω and a maximum power of 15W. The product is widely used in power management systems, BMS, industrial automation, new energy and other products.
Fenghua (FH) low resistance shunt resistor bare copper sheet resistor MS series 3921 volume product model parameter detailed explanation. Fenghua shunt resistor MS series has a maximum power of 6W and a wide range of product resistance options. This article provides the product selection parameters and mass production model introduction of Fenghua low resistance shunt resistors for the convenience of selection and product ordering.
Fenghua (FH) low resistance shunt resistor bare copper MS series 2512 has high reliability in volume, using copper alloy to achieve ultra high power of the same volume, up to 6W. The minimum resistance value can reach 0.2m Ω (0.2 milliohms). This article provides a detailed introduction to the MS series 2512 volume selection parameters and product selection model list of the low resistance shunt resistor of the FH brand.0.005
The Fenghua (FH) chip splitter resistor MS series belongs to pure metal low resistance value splitter resistors. Using copper alloy, it has product characteristics such as ultra-high power and ultra-low resistance. The maximum power of the product can reach 15W, and the minimum resistance value can reach 0.1mR (0.1m Ω). Due to its extremely high product stability, it is widely used in power management systems, BMS, power supply and other products. This article will provide a detailed introduction to the product selection parameters and model list of the Fenghua (FH) chip low resistance shunt resistor MS series.
