HNST WELCOME！ 0755-23173910

English /中文

{{searchSelectTypeText}}

Search

walter Precision resistor current diverter Alloy resistance SMD fuse ever ohms fuse

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJU4828,CJ,MOSFETS

CJU4828

MOS ,N-ch ,CJU4828 ,1.25W ,4.5A ,60V ,TO-252-2L(4R)

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM0801W25M3860V14CJ
Manufacturer Product Number：	CJU4828
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	1.25W
Continuous Drain Current (ID) ：	4.5A
Drain-Source Voltage (V) ：	60V
Package ：	TO-252-2L(4R)
Description：	MOS ,N-ch ,CJU4828 ,1.25W ,4.5A ,60V ,TO-252-2L(4R)

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2024-12-24

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

Why does high negative pressure in SiC MOS affect threshold drift The threshold drift of SiC MOSFET is affected by negative pressure because this device has a high leakage current, which reduces the difference between the control terminal voltage and the source terminal voltage, thereby affecting the switching performance of MOSFET. In addition, high negative pressure may also cause MOSFETs to enter rupture mode and trigger other adverse effects.

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

What are the differences between MOSFET and SBD? MOSFET and SBD are two different types of semiconductor devices, with the main differences as follows: 1. Different working principles, 2. Different conduction characteristics, and 3. Different costs and complexities.

Calculation method and formula for MOS transistor losses The losses of MOS transistors can be estimated by calculating their current losses and power losses. Current loss refers to the loss caused by the passage of current inside a MOS transistor, which is due to the resistance loss between electrons and the silicon substrate when passing through the MOS transistor. This loss can be calculated using the following formula:

Combination of Silicon Carbide (SiC) Power Management Solutions Silicon carbide solutions support the replacement of aircraft's pneumatic and hydraulic systems with smaller, lighter, and more efficient electrical solutions to power onboard AC generators, actuators, and auxiliary power units (APU). This type of solution can also reduce the maintenance requirements of these systems. However, the most significant contribution of SiC technology lies in its mission to electrify commercial transport vehicles, which are one of the world's largest sources of GHG emissions. With the advent of 1700V metal oxide semiconductor field-effect transistors (MOSFETs) and configurable digital gate drive technology, today's SiC solutions enable designers to generate maximum productivity with minimal energy consumption for these systems.

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

Introduction to Low Sensitivity SiC Power Modules Low inductance SiC power module refers to a power module that uses silicon carbide (SiC) as a semiconductor material and has a lower inductance value. Compared with traditional silicon (Si) power modules, low inductance SiC power modules have higher switching speed and lower switching losses, thereby improving the efficiency and reliability of the system.

The requirements for the driver board of SiC silicon carbide MOS dual pulse testing equipment are as follows: The requirements for the driver board of SiC silicon carbide MOS dual pulse testing equipment are as follows:

What are the solutions to reduce losses in SiC modules? The SiC module loss reduction scheme mainly considers the following four aspects: adopting low voltage and low frequency design, optimizing the driver program, optimizing the structural design, and adopting low side resonance technology.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}