HNST WELCOME！ 0755-23173910
English /中文
{{searchSelectTypeText}} Search
current diverter SMD fuse fuse walter ever ohms Precision resistor Alloy resistance
Total amount：{{isChinese?'￥':'$'}}{{cartProductTotal}}
Cart {{cartCount}}
CATEGORY
View All
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。
HNST → Power management chip → NXP Battery Sensor Product Model List and Product Introduction

NXP Battery Sensor Product Model List and Product Introduction

2024.07.29 HNST views: 98
Power management chip Battery charger chip NXP Power management
NXP Brand Introduction NXP Spot Check

NXP Battery Management: Lithium ion (Li ion) and lead-acid batteries require precise charging current and output voltage to meet automotive and industrial standards. Vehicle grade battery controllers are the ideal choice for automotive battery management.


The main product features and model list of NXP battery sensors are as follows:

1. Battery sensor, communication transceiver, embedded microcontroller+power supply, system basic chip

2. Excellent voltage characteristics

MC33772C: Lithium ion battery controller IC, designed for automotive and industrial control applications such as HEV, EV, ESS, and UPS systems.

MM912_637: This series of battery sensors adopts NXP S12 MCU technology and is a fully integrated LIN battery monitoring device.

MM9Z1_638: Fully integrated intelligent battery sensor with CAN/LIN, suitable for automotive applications

 


The above is a list of the main product features and model characteristics of battery sensors in NXP's battery management product array. For more detailed information, please consult our online sales.

Brand

Product Recommendation

Logic ICs74HC595D

Recommend Article

NXP MC33772B is a 6-channel lithium-ion battery controller IC suitable for 14V NXP MC33772B is a 6-channel lithium-ion battery controller IC. MC33772 lithium battery controller IC, suitable for automotive electronics and industrial control applications such as 14V lithium batteries, HEVs, EVs, ESS, and UPS systems.
Introduction to NXP Battery Management Chip Array This article introduces the NXP battery management chip array. There are several categories of NXP battery management chip arrays: 1. Battery cell controllers. 2. Battery communication IC. 3. Battery charger. 4. Battery sensor.
NXP is suitable for the 11W AC-DC controller TEA1723DT with integrated power switch NXP TEA1723DT is a small, low-cost switch mode power supply (SMPS) controller IC suitable for low-power applications (up to 11 W) and can directly operate with a rectified mains power supply. It is designed for 11W AC-DC controllers with integrated power switches. This device integrates a high voltage power switch (700 V) and is optimized for flyback converter topology, which can improve efficiency over the full load range with extremely low no-load power consumption. The device is equipped with a built-in startup circuit, which can be directly started using rectified mains voltage without the need for any external discharge circuit. A hiccup frequency of 1270 Hz can achieve no-load power consumption below 35 mW under high mains input conditions.
(New Product Recommendation) NXP battery cell controller MC33774 is an 18 channel lithium-ion battery cell controller IC The NXP battery cell controller MC33774 is an 18 channel lithium-ion battery cell controller IC. MC33774A is a lithium battery controller IC designed for automotive and industrial applications.
NXP AC-DC Controller TEA1723FT with Integrated Power Switch The NXP AC-DC controller TEA1723 with integrated power switch is a small-sized and low-cost switch mode power supply (SMPS) controller IC, suitable for low-power applications (up to 11 W), and can work directly with rectified mains power. This device integrates a high voltage power switch (700 V) and is optimized for flyback converter topology, which can improve efficiency over the full load range with extremely low no-load power consumption. The device is equipped with a built-in startup circuit, which can be directly started using rectified mains voltage without the need for any external discharge circuit. A hiccup frequency of 1750 Hz can achieve no-load power consumption below 53 mW under high mains input conditions.

Hot Tags

PCBA scheme FUZETEC Thin film capacitor OLED display screen walter LB MLCC Sheet resistance Low resistance value resistance Renesas JINKE amplifier Metal foil resistance sytatek electrolytic capacitor sart CBB capacitor Thick film low resistance resistor Littelfuse sartfuse Voltage regulator chip IC Low resistance current detection resistance socay resistance Low resistance sampling resistor alloy resistance RALEC precision resistor TDK ELLON JDT Walterfuse CHEVRON PRODUCT NEWS precision resistor Solid state capacitor NXP active bridge rectifier controller (AC-DC) SMT alloy resistance AC-DC control module Safety capacitor murata Interface chip IC ON Self-restoring fuse fuse default BOURNS High voltage capacitor DC-DC Low resistance current sensing resistor yageo
Prev：NXP battery cell controller MC33772C, 6-channel lithium-ion battery controller IC
Next：NXP's MC34673 is a 1.2 single cell lithium-ion battery/lithium polymer battery charging IC