HNST WELCOME！ 0755-23173910

English /中文

Search

fuse Alloy resistance current diverter ever ohms Precision resistor walter SMD fuse

Cart 0

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJU04N60A,CJ,MOSFETS

CJU04N60A

MOS ,N-ch ,CJU04N60A ,1.25W ,4A ,600V ,TO-252-2L(4R)

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM0761W25M2660014CJ
Manufacturer Product Number：	CJU04N60A
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	1.25W
Continuous Drain Current (ID) ：	4A
Drain-Source Voltage (V) ：	600V
Package ：	TO-252-2L(4R)
Description：	MOS ,N-ch ,CJU04N60A ,1.25W ,4A ,600V ,TO-252-2L(4R)

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

File

File Type	File Name

Lead time： Estimated delivery date 2025-05-05

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Calculation methods for P-channel enhanced VDS and CGS In a P-channel Enhanced Mode FET, VDS represents the voltage between the drain and source, while CGS represents the capacitance between the gate and source. When calculating VDS, it is necessary to consider the working state of the P-Channel Enhanced Mode FET. Generally, the following formula can be used for calculation:

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

What are the differences between SiC SBD and SiC MOSFET? SiC SBD and SiC MOSFET are chips made of polarized silicon carbide material, which have high heat dissipation and conductivity. The difference lies in:

The switching performance of SiC MOSFET is controlled by gate drive The switching performance of SiC MOSFET is controlled by gate drive. Voltage source gate drive (VSG) is the most widely used structure in MOSFETs due to its low cost and simplified structure.

Introduction to Power MOSFETs for Motor Drive Applications The application of motor drive is quite extensive, among which power MOSFET plays an important role. Anson Mei has a diverse range of power MOSFET product lines, among which NTBLS1D5N10MC unipolar, N-channel power MOSFET can meet the stringent requirements of related applications and is one of the best choices for motor drive control.

Characteristics and Application Scenarios of Silicon Carbide (SiC) SiC Ceramic is a high-performance material with characteristics such as high strength, high hardness, high temperature stability, excellent corrosion resistance, and low thermal expansion coefficient. It is widely used in fields such as semiconductor, aviation, defense, nuclear energy, and chemical industry.

5 important techniques for selecting gallium nitride (SiC) MOSFETs To prove that your choice of SiC as the preferred power semiconductor for switch mode design is correct, please consider the following prominent features. Compared to standard or super junction MOSFETs or even IGBTs, SiC devices can operate at higher voltages, frequencies, and temperatures. Most of the power loss of other devices does not exist in SiC devices, so the efficiency of SiC devices can reach over 90% in most applications. Initially, SiC devices were more expensive than other MOSFETs or IGBTs.

Will Cascode SiC be faster than regular SiC? The Cascode SiC (silicon carbide common source common gate) structure may have faster switching speeds than ordinary SiC devices in some cases. The Cascode structure combines the characteristics of Si (silicon) MOSFET and SiC devices, and through optimized design and driving methods, it is possible to achieve lower on resistance, faster switching conversion, and lower switching losses.

Calculation method and formula for MOS transistor losses The losses of MOS transistors can be estimated by calculating their current losses and power losses. Current loss refers to the loss caused by the passage of current inside a MOS transistor, which is due to the resistance loss between electrons and the silicon substrate when passing through the MOS transistor. This loss can be calculated using the following formula:

Introduction to Low Sensitivity SiC Power Modules Low inductance SiC power module refers to a power module that uses silicon carbide (SiC) as a semiconductor material and has a lower inductance value. Compared with traditional silicon (Si) power modules, low inductance SiC power modules have higher switching speed and lower switching losses, thereby improving the efficiency and reliability of the system.

Product Recommendation Maker Dynamics Applications