AGA 1AG / AGC 3AG / AGW 7AG is basman glass fuse, this article mainly simply understand basman glass fuse and install basman glass fuse need to pay attention to what details? Take AGA 1AG fuse as an example, AGA 1AG fast breaking glass fuse is a size of 6.4 x 15.9mm micro fuse, usually packaged by glass pipe, has the characteristics of small size, fast circuit speed, weak current bearing capacity and so on. This kind of fuse is mainly used in some home electronic equipment, such as power supply, TV, air conditioning, electric fan, installation is very convenient, can be directly installed into the bassman series fuse base, box or fuse clip, or use available axial lead for through hole installation.
The Bussman fuse meets environmental standards and does not contain substances harmful to the human body and the environment. The use of environmentally friendly fuse can help reduce waste generation and pollution to the environment, 1 AG glass fuse is usually rated between a few milliampere to a few hundred milliampere, the circuit breaker time is generally between tens of milliseconds to a few seconds. Its fuse principle is that when there is over current or short circuit in the circuit, the metal wire in the glass tube will quickly heat up, reach the melting point, so as to cut off the circuit, protect the equipment from damage, specific can refer to the following figure.
When selecting and using a glass fuse:
Select the appropriate specification and model according to the rated current and voltage of the equipment to ensure that the fuse can withstand the normal operating current and instantaneous impact current of the circuit.
During installation, it is necessary to correctly access the fuse to the circuit to ensure that the current in the circuit can pass through the fuse. Pay attention to avoid the influence of external forces such as mechanical pressure or vibration, so as not to cause bad contact or damage.
In the process of use, the use of the fuse should be checked regularly. If abnormal is found, it should be replaced in time. Attention should be paid to avoid the use of expired fuse, so as not to affect the safety and stability of the circuit.
