Cart
{{cartCount}}
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。
MGFL2012F inductor is a laminated ferrite high current inductor product of Shenzhen Meijie Microelectronics Technology Co., LTD. (hereinafter referred to as Meijie Technology). The product is mainly used for DC-DC circuit high current inductor application, has the characteristics of small size, high current capability, etc., suitable for a variety of electronic equipment in the filter and choke function.
Maget Technology is specialized in the development and production of electronic components, automotive products AMPIT3015 series winding inductors is a part of its many product lines. This series of inductors is mainly used in the field of automotive electronics, with excellent electrical performance and quality assurance, to meet the needs of automotive electronic equipment for high-performance inductors.
In the field of power electronics, power inductors are the key components for energy conversion and control. In order to ensure the stable operation and optimization of the circuit, it is very important to select the correct power inductance parameters. This paper aims to analyze the main parameters of power inductors in detail, hoping that we can help engineers and engineers better understand their characteristics, and can easily choose suitable inductor devices.
The upgrade of performance cannot be separated from the upgrade of hardware, and the power supply is a very important part of it. To improve AI performance, the Qualcomm 8750 platform has adjusted the nuclear power supply inductance to a value of 0.24uH for the first time, and proposed Isat to meet the high requirements of 6.5A&DCR<24mohm. Shunluo Electronics was the first to develop the material MWTC1412065SR24MTB02 suitable for the Qualcomm 8750 platform, and obtained Qualcomm testing certification, making it the first domestically produced product.
Parasitic Inductive Noise Reduction (LCT) is a component that significantly suppresses high-frequency noise by using decoupling capacitors together to reduce the ESL inside the capacitor and the ESL generated inside the substrate. It has outstanding suppression effect on the high-frequency harmonic noise of several MHz to 1GHz caused by DC-DC converters and other power lines.
Inductors have alternating current, and laying copper at the bottom of the inductor will generate eddy currents on the ground plane. The eddy current effect will affect the inductance of the power inductor, and eddy currents will also increase system losses. At the same time, the noise generated by alternating current will increase the noise on the ground plane, which will affect the stability of other signals. From the perspective of EMC, laying copper on the bottom of the inductor and a complete ground surface is beneficial for EMI design; The current production process of inductors has been upgraded, and shielded inductors are used. There are very few leaked magnetic induction lines, which have little impact on the inductance of the inductors and are also beneficial for heat dissipation.
With the changes in the healthcare market environment, personal healthcare devices used for daily health management have also been affected. These products are smaller in size and support cloud connectivity. Murata's product features: By utilizing compact universal components (capacitors, inductors, etc.), we manufacture compact products with higher design freedom. Utilize Bluetooth Intelligent modules and wireless communication modules that support near-field communication (NFC) make it easier to manufacture daily health monitoring products with network connectivity capabilities.
Dedicated to the resource recycling and reuse of waste plastics. Murata Production Co., Ltd. has decided to invest in the joint venture company R PLUS JAPAN, which is committed to the recycling and reuse of waste plastics in order to achieve sustainable resource utilization.
Development process certification of automotive functional safety standards. Murata Manufacturing Co., Ltd. obtained the development process certification of the automotive functional safety standard "ISO 26262" issued by the German third-party certification body SGS-T Ü V Saar GmbH on February 13, 2024, and was awarded the certificate on May 21.
Of course, there is a huge business opportunity in the blood glucose meter market, and component manufacturers have also recognized it. Therefore, they have been following the development of technology and the market, making meticulous product layouts to better meet the needs of developers. In this field, Murata Manufacturing has a very comprehensive technical preparation, relying on a rich product portfolio to create a comprehensive solution around blood glucose meters (including CGM products).
