Cart
{{cartCount}}
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。
OptiMOS™ 25V MOSFETs have obvious advantages in applications. With the lowest on-resistance, lowest gate charge and lowest output capacitance in the industry, it reduces MOSFET power consumption by 20% while achieving higher performance under any load condition.
Infineon's 12V-40V n-channel power MOSFETs are optimized for high current capability and low RDS(on) for a wide range of applications, including DC motors, battery management systems
Recommendations for anti-counterfeiting solutions: OPTIGA ™ Authenticate S Infineon. OPTIGA™ Authenticate S Consumer electronic devices, household appliances, and industrial machinery have long faced the risk of counterfeit spare parts and accessories. Counterfeit and inferior products can endanger device functionality and user safety, thereby damaging brand value. OPTIGA? Authenticate S can solve this problem. It is a mature, hardware based turnkey security solution that can be used to address any device authentication challenge. This anti-counterfeiting solution has unprecedented configuration flexibility and provides a series of enhanced security features.
Infineon gate driver IC chip model 2ED4820-EM, 48 V intelligent high-voltage side MOSFET gate driver with SPI, suitable for automotive applications.
Recommended by Huanian Mall: Infineon TLE9012 battery balancing and battery cell monitoring. And provide a full stack solution for the power management system BMS. Infineon TLE9012 battery balancing and battery cell monitoring chips are important components, and this article will provide a detailed introduction to them.
Today, Huanian Mall recommends the Infineon digital isolator 4DIR1401H. What is a digital isolator? The so-called digital isolator provides electrical isolation in data signal transmission. Use digital isolators to prevent potential electrical noise, wire interference, voltage fluctuations, and other issues from interfering or damaging the system.
Today, we recommend three Infineon N-channel power MOSFETs: IPT017N10NF2S, PF016N10NF2S，IPT039N15N5。 Infineon designs, develops, produces, and sells a wide range of semiconductors and semiconductor based solutions, focusing on key markets in industries such as automotive, industrial, and consumer electronics. Its products are diverse, ranging from standard components to special components for digital, analog, and mixed signal applications, to specific solutions tailored for customers, and all the way to corresponding software.
Understand Infineon Battery Management System (BMS). Battery Management System (BMS) is an electronic control circuit that can monitor and adjust the charging and discharging of batteries. The battery characteristics that the system needs to monitor include detecting battery type, voltage, temperature, capacity, state of charge, power consumption, remaining working time, charging cycle, and certain other characteristics. The task of the battery management system is to ensure the effective utilization of the remaining battery power. To avoid battery loss, a Battery Management System (BMS) can protect the battery from deep discharge and overvoltage caused by fast charging and excessive discharge current. For multi-core batteries, the battery management system can balance the battery cells, allowing different battery cells to have the same charging and discharging requirements.
Murata Manufacturing Co., Ltd. is collaborating with Infineon Technologies AG (headquartered in Germany, hereinafter referred to as "Infineon Company") to provide a new platform solution for STM32 MCU for IoT device developers.
