HNST WELCOME! 0755-23173910
English  |中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CRH0603F8R20P05Z is a 0603-packaged, 8.2Ω, 0.125W precision thick-film chip resistor from TA-I Technology (EVER OHMS), belonging to the CRH high-power thick-film series. Its engineering significance lies not in the resistance value itself, but in delivering 0.125W of power handling capability within the standard 0603 footprint (metric 1608, approximately 1.6mm × 0.8mm), a 25% increase over the 0.1W typical of conventional thick-film resistors at the same size — creating additional thermal headroom for compact board layouts.

1. Part Number Decoding

 
 
Segment Meaning
CRH TA-I high-power thick-film chip resistor series, distinctly positioned above the standard CR series
0603 Imperial footprint code, corresponding to metric 1608; body size approximately 1.6mm × 0.8mm
F Resistance tolerance ±1%
8R20 Nominal resistance 8.2Ω, with “R” denoting the decimal position
P05 Factory power rating code, corresponding to 1/8W (0.125W) in the 0603 size
Z Packaging and feature identifier, typically denoting tape-and-reel, lead-free terminations, RoHS/REACH compliant

The “F” grade (±1%) and the common “J” grade (±5%) are physically identical, but in voltage-divider, feedback, and current-setting loops, ±1% tolerance directly determines the actual error boundary of the circuit node — this is why the F grade is not interchangeable with J in precision-oriented positions.

2. Core Electrical Specifications

 
 
Parameter Value
Resistor type Thick-film chip resistor
Nominal resistance 8.2Ω (E96 series)
Tolerance ±1% (F grade)
Rated power 0.125W (1/8W) @ 70℃
Temperature coefficient (TCR) ±400 ppm/℃
Maximum working voltage 50V
Operating temperature range -55℃ to +155℃
Termination structure Ag inner / Ni barrier / Sn outer
Packaging Tape-and-reel, 5000 pcs/reel standard

At 8.2Ω (low-resistance range), the specified TCR is ±400 ppm/℃. This is a typical figure for thick-film resistors in the low-ohm region; where tighter temperature stability is required, the resistance drift across the operating temperature window should be calculated during selection.

3. Engineering Significance of 0.125W in 0603

Conventional 0603 thick-film resistors are generally rated at 0.1W. The CRH series raises this to 0.125W without increasing the board footprint — an improvement of approximately 25%. This is not achieved by enlarging the chip area, but through coordinated adjustments to the substrate material, electrode structure, and thick-film paste formulation: the CRH series uses an improved alumina ceramic substrate with widened side electrodes that shorten the thermal path from the resistor body to the PCB, while the paste formulation is optimized for higher heat dissipation per unit area.

The derating curve is where the 0.125W rating becomes operationally relevant. The rating is referenced to 70℃: full power is permissible below 70℃, followed by linear derating to zero at 155℃. At 85℃ ambient, the allowable power falls to approximately 0.103W; at 100℃, approximately 0.081W; at 125℃, only about 0.044W. In enclosed chassis or on board areas adjacent to MOSFETs or inductors, local temperatures can readily exceed 85℃ — the 0.125W figure should therefore not be applied directly without checking the ambient temperature against the derating curve.

4. Circuit Positions for the 8.2Ω / 0.125W Combination

The low-resistance nature of 8.2Ω places this resistor primarily in current paths rather than voltage-sensing nodes. Combined with ±1% tolerance and 0.125W headroom, its typical applications include:

LED current limiting and constant-current branches. At 8.2Ω, it can set forward current in the milliampere-to-tens-of-milliamperes range for indicator LEDs or small LED strings on 3.3V–5V rails. The 0.125W rating provides thermal margin above actual dissipation, avoiding the margin shortfall of 0.1W parts at elevated temperatures.

Low-side current sensing and feedback nodes. In power management or motor drive circuits, 8.2Ω can serve as a low-value sense resistor, converting branch current into a measurable voltage. ±1% tolerance directly affects sensing gain consistency; the 0.125W rating covers transient overloads at the sensing node.

Impedance matching and termination. In digital interface or high-speed signal termination networks, 8.2Ω functions as a low-value terminating element for reflection absorption and overshoot suppression. The 0603 footprint allows placement close to the receiving end, minimizing the termination stub.

RC time constants and filtering. Paired with decoupling capacitors, 8.2Ω forms low-pass filtering or damping nodes at supply entries and sensitive analog rails. The 0.125W headroom maintains stability where DC bias or ripple current is present in the filter branch.

5. Sourcing Channels

For CRH0603F8R20P05Z sampling and volume procurement, TA-I Technology operates a complementary authorized channel structure in mainland China: a core tier-one distributor and an online authorized platform.

Shenzhen Shunhai Technology Co., Ltd. is TA-I’s core tier-one authorized distributor in mainland China, holding an annual official authorization certificate and factory-direct supply qualification. Its portfolio covers the full TA-I resistor range, including the CRH high-power thick-film series. A dedicated FAE team supports power derating verification, resistance matching, and circuit optimization during selection, with sample requests and medium-to-high-volume project procurement accommodated.

Huanian Mall is TA-I’s officially certified online authorized distributor, oriented toward small-batch spot purchases and flexible replenishment during R&D prototyping. The platform provides real-time inventory lookup, online selection, and one-click ordering, with tiered pricing for larger quantities.

In practice, the two channels divide the sourcing workflow: for design-in technical support, sample validation, or medium-to-large volume supply, engage Shunhai Technology; for prototyping, low-volume replenishment, or procurement of a fully specified standard part number, Huanian Mall provides the faster online path.

  • Recommended similar products:

    Part Number Parameter
    CRH0603F910KP05Z 0603 910K 0.125W 1%
    CRH0603F910RP05Z 0603 910R 0.125W 1%
    CRH0805F9R10P05Z 0805 9.1R 0.25W 1%
    CRH0805F200RP05Z 0805 200R 0.25W 1%
    CRH0805F220KP05Z 0805 220K 0.25W 1%
    CRH0805F220RP05Z 0805 220R 0.25W 1%
    CRH0805F3K30P05Z 0805 3.3K 0.25W 1%
    CRH0805F68R0P05Z 0805 68R 0.25W 1%
    CRH0805F6R80P05Z 0805 6.8R 0.25W 1%
    CRH0603F910KP05Z 0603 910K 0.125W 1%
    CRH0603F910RP05Z 0603 910R 0.125W 1%

Brand

Product Recommendation

Recommend Article