HNST WELCOME! 0755-23173910
English  |中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CRH0603F7K50P05Z 0603 7.5K 0.125W Ever Ohms Resistor Overview

In 0603 chip resistor selection, 7.5 kΩ with ±1% tolerance and 0.125 W power rating is a familiar combination. What makes the Ever Ohms CRH0603F7K50P05Z worth separate attention is not the numbers themselves, but that it delivers 1/8 W (0.125 W) in the 0603 footprint while holding TCR to ±100 ppm/°C. For circuits that need power headroom within a constrained board area, this combination carries practical engineering weight.

Part number logic and core specifications

In the model code, “CRH” identifies Ever Ohms’ high-power enhanced thick-film series, distinct from the standard CR general-purpose line; 0603 is the imperial package size; F denotes ±1% tolerance; 7K50 represents 7.5 kΩ; and P05Z is the power, packaging and lead-free compliance suffix. Key ratings are: resistance 7.5 kΩ, tolerance ±1%, rated power 1/8 W (0.125 W), TCR ±100 ppm/°C, operating temperature range −55°C to +155°C, and compliance with RoHS and REACH.

Technical positioning of the CRH series at 0603

A standard 0603 thick-film resistor is typically rated at 1/10 W. The CRH0603F7K50P05Z raises that to 1/8 W, roughly a 25% increase. This is not merely a datasheet relabeling: it comes from a thickened resistive glaze and an electrode structure designed to spread heat more effectively within the same package footprint. On temperature stability, the ±100 ppm/°C TCR sits at the better end of the range for general-purpose thick-film parts in this size; standard CR devices of the same tolerance commonly fall in the ±200 ppm/°C to ±400 ppm/°C band. In small-signal nodes such as feedback dividers and reference biasing, a lower TCR directly reduces the full-temperature swing of the control loop.

Where it fits in a design

The 7.5 kΩ / 0603 combination appears frequently in DC-DC feedback divider networks, op-amp input biasing, bleeder and dummy-load positions in low-power supplies, and LED current-limiting branches. In these locations, the 0.125 W headroom means a short output overshoot or load transient is less likely to push the resistor into resistance drift or open-circuit failure. The CRH series’ power margin is aimed primarily at industrial power supplies, automotive auxiliary rails, and other applications where long-term stability and rework cost matter more than the unit price of the resistor.

Supply channel

For prototype quantities and volume orders, Shenzhen Shunhai Technology Co., Ltd. has been an Ever Ohms Tier-1 authorized distributor since 2017, holding full distribution rights for the complete thick-film and thin-film chip resistor portfolio. Its authorization certificate number TW0202601E0000122 is valid through the 2026 calendar year. Huanian Mall, the online in-stock platform associated with Shunhai Technology, carries the same Ever Ohms authorization and maintains inventory of the CRH0603F7K50P05Z, with original-factory sourcing and traceability. For batch-specific TCR data or cross-reference support during selection, Shunhai’s FAE team can provide datasheets and technical assistance.

  • Recommended similar products:

    Part Number Parameter
    CRH0603F3K90P05Z 0603 3.9K 0.125W 1%
    CRH0603F4K30P05Z 0603 4.3K 0.125W 1%
    CRH0603F4K70P05C 0603 4.7K 0.25W 1%
    CRH0603F4K99P05Z 0603 4.99K 0.25W 1%
    CRH0603F560RP05Z 0603 560R 0.25W 1%
    CRH0603F5R60P05Z 0603 5.6R 0.25W 1%
    CRH0603F620RP05Z 0603 620R 0.25W 1%
    CRH0603F68K0P05Z 0603 68K 0.25W 1%
    CRH0603F7K50P05Z 0603 7.5K 0.25W 1%
    CRH0603F910KP05Z 0603 910K 0.125W 1%

Brand

Product Recommendation

Recommend Article