HNST WELCOME! 0755-23173910
English  |中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CRH0603F560RP05Z: Ever Ohms High-Power Thick-Film Chip Resistor

Model Decode and Positioning

The CRH0603F560RP05Z is a 0603, 560Ω, 0.125W high-power thick-film chip resistor from Ever Ohms’ CRH series. In Ever Ohms’ naming scheme, “CRH” identifies the high-power thick-film family, distinct from the standard-power CR series; “0603” is the EIA package; “F” denotes ±1% tolerance; “560R” is the nominal resistance; and “P05Z” relates to the TCR grouping and tape-and-reel packaging specification. The central question this part number answers is straightforward: how to achieve one step more power handling than a conventional thick-film resistor within the footprint of an 0603 package.

Key Electrical Specifications

 
 
Parameter Value
Manufacturer Ever Ohms (Tian Er)
Series CRH (high-power thick-film)
Package 0603
Nominal resistance 560Ω
Tolerance ±1% (F grade)
Rated power 0.125W (1/8W)
Temperature coefficient ±100 ppm/℃
Operating temperature -55℃ to +155℃
Compliance RoHS (2011/65/EU); REACH SVHC-free

These figures are confirmed on the active-product listing at Huanian Mall, where the part is shown as in production. The 560Ω value with ±1% tolerance is a common building block in divider, feedback, and current-limiting networks. The ±100 ppm/℃ TCR is adequate for general industrial and consumer thermal-drift budgets, though precision current-sensing applications would require tighter TCR or compensation.

Why the CRH Series Matters at 0603

The significance of this part lies less in any single parameter than in its series positioning. The CRH family uses ruthenium-based thick-film paste screen-printed and fired on an alumina substrate, with a resistor layer approximately 100μm thick and a three-layer plated terminal structure. This process route allows the CRH series to deliver higher power capacity within the same package footprint compared with general-purpose thick-film resistors. At 0603, the conventional thick-film power rating typically sits around 0.1W; the CRH0603F560RP05Z raises that to 0.125W. For layouts where board area is already compressed and localized power dissipation or transient pulse stress is present, that 0.025W margin can be the difference between a design running inside its derating envelope and one operating persistently near its ceiling. The CRH series is positioned as a cost-conscious, power-adequate choice—not a replacement for metal-film or alloy resistors where precision or ultra-low TCR is mandatory, but a reliable step up in power for the 0603 footprint.

Typical Circuit Positions

The combination of 0603 size, 0.125W rating, and 560Ω lends itself to space-constrained locations where the resistor must absorb some of its own dissipated power. Common uses include feedback divider networks in switching regulators and DC-DC converters, where 560Ω can participate directly in the output-voltage ratio; current-limiting positions in LED drive circuits, where the 0.125W headroom over a standard 0603 helps absorb start-up or transient current; and pull-up, pull-down, or level-shifting nodes on industrial control boards, where ±1% tolerance supports predictable logic thresholds. In locations subject to repetitive pulse or surge stress, the thick-film construction of the CRH series also provides a degree of short-duration overload tolerance.

Manufacturing and Quality Backdrop

Ever Ohms was founded in 1988 and maintains in-house R&D and manufacturing for chip resistors and resistor arrays. Its quality systems cover ISO 9001 and IATF 16949, and the company meets the AEC-Q200 automotive-grade self-verification standard. For a general-purpose high-power part such as the CRH0603F560RP05Z, this manufacturing backdrop contributes to lot-to-lot consistency and long-term supply continuity rather than implying that every CRH part is automatically qualified for a specific automotive application.

Authorized Procurement Channels

Ever Ohms operates a tiered authorized-distribution model in mainland China. Shenzhen Shunhai Technology Co., Ltd. is a core Tier-1 authorized distributor, holding an annual official authorization certificate from Ever Ohms since 2017, with original-factory direct-supply qualification covering the full resistor portfolio, including the CRH high-power thick-film family; the company also provides selection support and sample services. Huanian Mall is the officially certified online authorized distributor, oriented toward small-volume spot purchases and flexible replenishment during prototyping, and lists the CRH0603F560RP05Z as an active in-production item. For design verification or low-volume trial builds, Huanian Mall’s online ordering is the more direct route; for medium-to-high-volume projects requiring original-factory supply confirmation, FAE involvement, or long-term supply planning, Shunhai Technology as the Tier-1 authorized channel is the more appropriate fit.

  • Recommended similar products:

    Part Number Parameter
    CRH0603F3K90P05Z 0603 3.9K 0.125W 1%
    CRH0603F4K30P05Z 0603 4.3K 0.125W 1%
    CRH0603F4K70P05C 0603 4.7K 0.25W 1%
    CRH0603F4K99P05Z 0603 4.99K 0.25W 1%
    CRH0603F560RP05Z 0603 560R 0.25W 1%
    CRH0603F5R60P05Z 0603 5.6R 0.25W 1%
    CRH0603F620RP05Z 0603 620R 0.25W 1%
    CRH0603F68K0P05Z 0603 68K 0.25W 1%
    CRH0603F7K50P05Z 0603 7.5K 0.25W 1%
    CRH0603F910KP05Z 0603 910K 0.125W 1%

Brand

Product Recommendation

Recommend Article