HNST WELCOME! 0755-23173910
English  |中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CRH0603F4K99P05Z 0603 4.99K 0.125W Tianer Resistor: Technical Positioning and Selection Notes for a High-Power Thick-Film Chip Resistor

In the 0603 footprint, general-purpose thick-film resistors typically stop at 0.1W. When a design needs power headroom within an existing 0603 pad but cannot move up to 0805, the 0603 4.99K 0.125W Tianer resistor CRH0603F4K99P05Z occupies a deliberate middle ground. Its value is not a higher headline specification but a power upgrade within the same package size, adding roughly 25% dissipation margin to a 0603 slot.

Part number logic: what separates CRH from CR

The structure of CRH0603F4K99P05Z maps directly to its product identity. “CRH” denotes the high-power thick-film chip resistor family, distinct from the standard CR thick-film series. “0603” is the imperial package size. “F” indicates ±1% resistance tolerance. “4K99” expresses 4.99 kΩ in three-significant-digit plus multiplier form. The “P05Z” suffix relates to temperature coefficient grade and packaging/process options. For BOM verification and incoming inspection, the complete part number should be used. Abbreviating it to CR0603F4K99P05Z points to the standard-power CR series, which has different rated power and derating behavior.

Key specifications

 
 
Parameter Value
Series Tianer (Ever Ohms) CRH high-power thick-film chip resistor
Package 0603
Nominal resistance 4.99 kΩ (4K99)
Tolerance ±1% (F)
Rated power 0.125W (1/8W) at 70°C
Temperature coefficient ±100 ppm/°C
Operating temperature -55°C to +155°C
Compliance RoHS (2011/65/EU); REACH SVHC-free

The 0.125W rating has a defined thermal boundary: it applies only up to 70°C ambient. Beyond that point, power derates linearly to zero at 155°C. In an 85°C environment, the allowable continuous dissipation is approximately 0.103W; at 100°C, it falls to roughly 0.077W. In enclosed industrial housings or placements near heat-generating components, practical loading is better held at 60–70% of the effective power rather than at the full 0.125W face value.

What 0.125W in 0603 actually changes

The step from 0.1W to 0.125W is numerically modest, but at the 0603 level it changes the character of the design margin. In the upper leg of a divider, an op-amp feedback branch, or a low-current bias node, a standard 0603 resistor operating near 0.1W is already in a derating-sensitive zone. CRH0603F4K99P05Z raises the ceiling enough to absorb transient overshoot, brief overloads, and long-term temperature rise without pushing the part into the steep portion of its derating curve. The design check for this part is typically temperature rise and derating, not voltage withstand: at 4.99 kΩ, the current at full rated power is on the order of 5 mA, and the corresponding voltage drop is far below the 75V withstand level commonly associated with the 0603 package.

The power gain comes from process-level adjustments rather than a simple re-rating: improved thermal paths in the ceramic substrate, modified ruthenium-based thick-film paste formulation, and reinforced terminal-electrode heat-spreading structures together raise heat dissipation efficiency within the same body volume. The terminal electrode uses a silver/nickel/tin three-layer structure, with the nickel layer acting as a diffusion barrier and the matte tin layer compatible with both leaded and lead-free soldering. A glass overcoat plus epoxy encapsulation provides humidity resistance and washability.

Where 4.99 kΩ fits

4.99 kΩ is a standard E96 value that appears where accurate ratio relationships matter. In the secondary feedback divider of a switching power supply, it can serve as the upper or lower leg that sets the output voltage sense ratio. In an ADC front-end attenuation network, it can function as either divider element where temperature-coefficient consistency is relevant. The ±100 ppm/°C TCR of the CRH series is more predictable in these ratio-sensitive positions than the standard CR series, whose TCR in comparable packages often sits in the ±200 ppm/°C to ±400 ppm/°C range. In motor-drive or relay-drive locations where back-EMF and turn-on surge are present, the larger thermal mass of the thick-film layer also gives it an advantage over thin-film alternatives of the same size in short-pulse tolerance.

Procurement channels

This part is available through Tianer’s authorized distribution network. Shenzhen Shunhai Technology Co., Ltd. is a core Tier-1 authorized distributor for Tianer in mainland China, holding an annual official authorization certificate since 2017. It carries the full thick-film, precision thin-film, alloy, and automotive-grade resistor lines and provides FAE selection support and sample requests. Huanian Mall is Tianer’s officially certified online authorized platform, suited to small-batch prototyping and standard-part stock checks, with real-time inventory visibility, tiered pricing, and next-day delivery to major cities. In practice, the two channels complement each other: project-scale volumes and in-depth technical support are better routed through Shunhai Technology, while R&D-stage replenishment and rapid price comparison can use Huanian Mall’s online access.

  • Recommended similar products:

    Part Number Parameter
    CRH0603F3K90P05Z 0603 3.9K 0.125W 1%
    CRH0603F4K30P05Z 0603 4.3K 0.125W 1%
    CRH0603F4K70P05C 0603 4.7K 0.25W 1%
    CRH0603F4K99P05Z 0603 4.99K 0.25W 1%
    CRH0603F560RP05Z 0603 560R 0.25W 1%
    CRH0603F5R60P05Z 0603 5.6R 0.25W 1%
    CRH0603F620RP05Z 0603 620R 0.25W 1%
    CRH0603F68K0P05Z 0603 68K 0.25W 1%
    CRH0603F7K50P05Z 0603 7.5K 0.25W 1%
    CRH0603F910KP05Z 0603 910K 0.125W 1%

Brand

Product Recommendation

Recommend Article