CRH0603F3K90P05Z — 0603, 3.9KΩ, 0.125W Ever Ohms High-Power Thick Film Resistor
The CRH0603F3K90P05Z is a high-power thick film chip resistor from Ever Ohms Technology (TA-I) , built on the CRH series platform in a standard 0603 footprint. It combines a 3.9KΩ nominal resistance with ±1% tolerance, a 0.125W (1/8W) power rating, and a ±100ppm/℃ temperature coefficient of resistance (TCR) . Its engineering significance lies less in any single parameter and more in the power density it achieves within the 0603 form factor—a distinction that matters when layout area is fixed and thermal headroom is tight.
Part number breakdown. Following the CRH series naming convention: CRH denotes the high-power thick film resistor family, positioned above the standard CR series through modifications in ceramic substrate selection, resistor paste formulation, and terminal electrode construction . 0603 is the EIA imperial package code (metric 1608). F indicates ±1% resistance tolerance. 3K90 represents 3.9KΩ. P05 maps to the 0.125W power class. The trailing Z is a tape-and-reel packaging code, compatible with automated SMT placement .
Electrical envelope and compliance. The resistor operates across a −55℃ to +155℃ temperature range, covering industrial and many automotive-adjacent environments . The ±100ppm/℃ TCR is a moderate-to-favorable figure for thick film technology, keeping divider ratios and feedback coefficients reasonably stable across temperature excursions. The part is RoHS compliant (2011/65/EU) and does not contain REACH SVHC substances above threshold limits, meeting the environmental compliance requirements of export-oriented electronic products . The CRH family also incorporates sulfur-resistant terminal electrode designs in relevant variants, with Ever Ohms’ automotive-grade portfolio aligned to AEC-Q200 self-verification standards .
The 0.125W-in-0603 case. Standard 0603 thick film resistors are typically rated at 0.1W (1/10W). The CRH0603F3K90P05Z raises that ceiling to 0.125W—a 25% increase that, at first glance, may appear incremental. In practice, that margin often decides whether a 0603 can remain in place inside a feedback divider, a pull-up network, or a signal-conditioning branch, or whether the design must step up to an 0805 package. Avoiding that step preserves board density and eliminates a re-layout cycle. For high-volume boards in consumer electronics, communication modules, and industrial control where every square millimeter counts, that trade-off is frequently more valuable than a specification-sheet upgrade to a larger case size.
Application fit. The 3.9KΩ value appears commonly in switch-mode power supply feedback dividers, where the 0.125W rating provides headroom for start-up and transient energy events. In industrial control signal chains, the part suits current limiting, biasing, and RC time-constant setting, with the 0603 footprint matching high-density SMT assembly flows. Communication equipment and consumer mainboards requiring localized power margin represent additional natural landing zones .
Supply chain access. Shenzhen Shunhai Technology Co., Ltd. is a tier-one authorized distributor of Ever Ohms in mainland China, holding a current annual authorization certificate and maintaining broad in-stock coverage of the Ever Ohms portfolio, supported by an FAE team for selection matching and derating calculations. Its affiliated online procurement platform, Huanian Mall (www.hnstshop.com) , provides datasheet access, tiered pricing, and direct ordering for this part, serving both engineering sample requests and volume production needs .