HNST WELCOME! 0755-23173910
English /中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

The Dayi RLN series is a long electrode current detection resistor belonging to the wide solder pad. Due to its side solder pad, the position of the solder pad is much wider than that of conventional products, so it is also called a wide electrode current detection resistor. RLN long electrode alloy resistors belong to the pure metal material manufacturing process, with excellent surge and impact resistance, as well as excellent heat dissipation and excessive current capacity for wide solder pads. This article provides a detailed introduction to the main product characteristics and selection parameters of Ta-i long electrode alloy resistors.


The main product characteristics of Dayi RLN series long electrode alloy resistors are as follows:

1. Pure metal plate current detection resistance

2. High current detection, resistance value as low as 1m Ω

3. Compliant with UL-94 V0 level

4. Low temperature rise variation, suitable for use in high-power products

 


The main product selection parameters for Dayi RLN series long electrode alloy resistors are as follows:

Type Size Power Rating at 70℃ Resistance Range(mΩ) TCR (ppm/℃) Operation Temperature Range (℃) Resistance Tolerance (%)
  0612 0.5W/1W 1-10 ±100 55~+170 1%
  2725 5W 0.2~1 ±100 55~+170 1%
  3720 0.5W/1W 1~30 ±500 55~+170 1%

 

The detailed list of main product selection parameters for Dayi RLN series long electrode alloy resistors is shown in the following figure:

The above are the main product selection parameters and detailed parameters of Dayi RLN series long electrode alloy resistors. If you need to learn more product parameters or order, please consult online customer service.

Brand

Product Recommendation

Recommend Article