HNST WELCOME！ 0755-23173910

English /中文

Search

Alloy resistance SMD fuse fuse ever ohms Precision resistor walter current diverter

Cart 0

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJPF08N60,CJ,MOSFETS

CJPF08N60

MOS ,N-ch ,CJPF08N60 ,2W ,8A ,600V ,TO-220F

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MNM1152W00M4460017CJ
Manufacturer Product Number：	CJPF08N60
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	N-ch
Power Dissipation (PD) ：	2W
Continuous Drain Current (ID) ：	8A
Drain-Source Voltage (V) ：	600V
Package ：	TO-220F
Description：	MOS ,N-ch ,CJPF08N60 ,2W ,8A ,600V ,TO-220F

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

File

File Type	File Name

Lead time： Estimated delivery date 2025-05-05

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

The Development Trend of High Voltage SiC MOSFET The research on high-voltage SiC MOSFETs is gradually deepening, mainly focusing on the design, preparation, and detection of high-voltage SiC MOSFETs. In the past two years, Sic Mosfet has broken through the peak tunneling voltage of 2600V, with crystal surface insulation characteristics as high as 200MV • cm-1, and static performance reaching 500A/1700V for a single chip in a half bridge topology. It can also support constant current and constant voltage regulator operation. In addition, there are SiC Mosfets designed for solid-state dye solar energy to meet the needs of these applications.

Comparison of driving circuit differences between SiC MOSFET and Si IGBT SiC MOSFET and Si IGBT are both indispensable products for the development of electronic products. SiC MOSFET and Si IGBT have many common characteristics and differences. Therefore, the following is a comparison of their product differences:

What are the advantages of SiC MOSFET over Si MOSFET Compared with Si MOSFETs, SiC MOSFETs have many advantages, including the following:

Instructions for using silicon carbide (SiC) diodes When using silicon carbide (SiC) diodes, some safety factors should be taken into account, such as avoiding excessive current flowing through the diode to prevent damage. During use, attention should also be paid to circuit design and diode selection to ensure optimal system performance.

What is SiC MOSFET? SIC MOSFET (Silicon Carbide MOSFET) is a new type of semiconductor device with high thermal stability, high conductivity, and high frequency characteristics. Learning SIC MOSFET includes the following aspects:

1200V SiC MOSFET tested under short-circuit conditions Short circuit capability of 1200 V SiC MOSFET and overcurrent protection solution using ready-made driver IC. Several design considerations were discussed to ensure accurate measurements. The test results indicate that the short-circuit capability of SiC MOSFET is highly correlated with the drain voltage and gate voltage, but not sensitive to the shell temperature and switching speed. By reducing the gate drive voltage or reducing the bus voltage, a longer endurance time can be achieved, but these solutions will lower the performance of SiC MOSFETs.

Calculation method and formula for MOS transistor losses The losses of MOS transistors can be estimated by calculating their current losses and power losses. Current loss refers to the loss caused by the passage of current inside a MOS transistor, which is due to the resistance loss between electrons and the silicon substrate when passing through the MOS transistor. This loss can be calculated using the following formula:

Combination of Silicon Carbide (SiC) Power Management Solutions Silicon carbide solutions support the replacement of aircraft's pneumatic and hydraulic systems with smaller, lighter, and more efficient electrical solutions to power onboard AC generators, actuators, and auxiliary power units (APU). This type of solution can also reduce the maintenance requirements of these systems. However, the most significant contribution of SiC technology lies in its mission to electrify commercial transport vehicles, which are one of the world's largest sources of GHG emissions. With the advent of 1700V metal oxide semiconductor field-effect transistors (MOSFETs) and configurable digital gate drive technology, today's SiC solutions enable designers to generate maximum productivity with minimal energy consumption for these systems.

Prospect sharing of silicon carbide (SiC) substrate sheets Silicon carbide (SiC) substrate is one of the key materials for manufacturing SiC devices, which can provide high lattice matching, low defect density, and high-quality surface flatness. With the continuous expansion of the silicon carbide power device market, silicon carbide substrate sheets have also been widely used and are expected to continue to maintain rapid growth in the coming years.

Calculation methods for P-channel enhanced VDS and CGS In a P-channel Enhanced Mode FET, VDS represents the voltage between the drain and source, while CGS represents the capacitance between the gate and source. When calculating VDS, it is necessary to consider the working state of the P-Channel Enhanced Mode FET. Generally, the following formula can be used for calculation:

Product Recommendation Maker Dynamics Applications