Holilai 61T glass fuse is a kind of fuse packaged by glass pipe, which has the characteristics of small size, fast circuit breaker speed and weak current bearing capacity. This fuse is mainly used in some small electronic devices or high-precision instruments, such as mobile phones, tablets, digital cameras, walkman, etc.
Current: 8A-30A Voltage: 250V
Standard: GB 9364, IEC 60127
Operating temperature: -55℃ ~125℃
Storage temperature: -55℃ ~85℃
Welheat heat: 260℃, 10s Max.
Welder-ability: 245℃ ± 5℃, 5s±0.5s
The current of the Holilai 61T glass fuse is rated between 8A and 30A. The 8A-30A fuse is a fuse rated between 8 amps and 30 amps. This fuse is usually used for the overcurrent protection of power supply circuits, motors, electric heaters and other equipment. The circuit breaker time is generally between tens of milliseconds to a few seconds, protecting the equipment from damage.
The features of the Holilai 61T glass fuse include:
When overcurrent or short circuit in the circuit, the fuse will quickly fuse, cut off the circuit, protect the equipment from damage, the rated current range of 8A-30A can adapt to the protection requirements of different equipment, the fuse meets the relevant safety standards, can effectively protect the circuit safety, the product is suitable for a variety of different power equipment and circuit protection occasions.
When selecting and using Holilai fuse, pay attention to the following points:
Select the appropriate specification and model according to the rated current and voltage of the equipment to ensure that the fuse can withstand the normal operating current and instantaneous impact current of the circuit. During installation, need to fuse correctly into the circuit, to ensure that the current in the circuit through the fuse, need to pay attention to avoid the influence of external force such as mechanical pressure or vibration, so as not to cause bad contact or damage, in the process of use of, need to regularly check the use of the fuse, if abnormal should be replaced in time. At the same time, attention should be paid to avoid the use of expired fuses, so as not to affect the safety and stability of the circuit.
