HNST WELCOME! 0755-23173910
English /中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

 

Walter Four Terminal Sampling Resistor FHCL Series Selection Manual and Purchase Address: Click on the image to enter



The four terminal sampling resistor refers to having four sampling electrodes to separate the current and voltage, reducing mutual interference between the current and voltage, and improving detection accuracy. The four terminal sampling resistor also plays a role in current detection and voltage detection in the circuit. The resistance value is controlled within ≤ 0.1R=100mR=100m Ω, and the main material is copper alloy. The four terminal sampling resistor can be divided into pure metal alloy resistor and metal foil alloy resistor. Pure metal alloy resistors have strong impact resistance, while metal foil alloy resistors have good heat dissipation and temperature rise effects. Below is a comprehensive introduction to the HFCL series of Suzhou Walter electronic four terminal sampling resistors.

 

Suzhou Walter four terminal sampling resistor HFCL series has the following advantages:

 

1. Wide range of volume options: 0603,1206,1508,2512,3008,3015,3618,3921

 

2. Wide range of resistance options: 1mR~25mR

 

3. Wide range of power options: 1W~5W

 

4. High accuracy: △ ≤ 1%

 

5. Low temperature coefficient: TCR < 50ppm/℃

 

6. High frequency response: H < 5.0nH

 

7. Excellent low galvanic effect (EMF<0.5uV/℃)

 

8. How to use RoHS and REACH halogen-free standards

 

9. The anti welding layer complies with UL94-V0 level

 

10. Low inductance (<0.05uH 10MHz)

11. Simultaneously collecting current and voltage for higher accuracy

 

The Naming convention of the four terminal sampling resistor HFCL series of Suzhou Huade Electronic Walter are as follows:

 

HFCL 2512 M 2W0 R001 F S
1 2 3 4 5 6 7

 

1: Product series:HFCL series, metal ceramic alloy current detection resistor, long electrode, four terminals, With lateral guide

 

2: Volume: 2512=6432=6.4 * 3.2mm

 

3: Material: M=Manganese copper alloy=MnCu alloy

 

4: Power: 2W0=2.0Watt

 

5: Resistance value: R001=0.001R=1mR

 

6: Accuracy: D=0.5%, F=1%

 

8: Product code: internal code or custom code

 

The selection parameters of Suzhou Huade Electronics Walter four terminal sampling resistor HFCL series are shown in the table below:

 

Part Number

Resistance Value

()

Power Rating

(Watt)

Resistance Tolerance

(%)

TCR

(ppm/℃)

HFCL0603MW33R 1~4 0.33 ±1%(F) ±100ppm
5~25 0.33 ±0.5%(D)±1%(F) ±50ppm
HFCL1206M1W0R 1~4 1 ±1%(F) ±100ppm
5~25 1 ±0.5%(D)±1%(F) ±50ppm
HFCL2512M2W0R 1~4 2 ±1%(F) ±100ppm
5~25 2 ±0.5%(D)±1%(F) ±50ppm
HFCL3015M2W0R 1~4 2 ±1%(F) ±100ppm
5~25 2 ±0.5%(D)±1%(F) ±50ppm
HFCL3618M3W0R 1~4 3 ±1%(F) ±100ppm
5~25 3 ±0.5%(D)±1%(F) ±50ppm
HFCL3921F4W0R 1~4 3 ±1%(F) ±100ppm
5~25 3 ±0.5%(D)±1%(F) ±50ppm

 

 Walter four terminal sampling resistor HFCL series functional characteristics:

 

Parameter

Conditions

Consent Standard

Short time over load

Power=2.5*Pr ; T=25±2℃ ; t=5s

± (1.0%+0.5mΩ)

IEC60115-1 4.13

 

High temp. exposure

T=+155±2℃; t=1,000hrs

± (1.0%+0.5mΩ)

IEC60115-1 4.25

Low temp. load life

T=-55±2℃ ; t=1,000hrs

± (1.0%+0.5mΩ)

IEC60115-1 4.25

Moisture load life

Vtest=Vmax, ton=90min,toff=30min, T=60±2℃,RH=95%,1,000hrs

± (2.0%+0.5mΩ)

IEC60115-1 4.25

Thermal shock

[-55℃ 30min→ R.T. 3min→ +150℃ 30min→ R.T. 3min]

by 100 Continuous Cycles

± (1.0%+0.5mΩ)

IEC60115-1 4.19

Load life at 70℃

Vtest=Vmax ; T=70±2℃ ; t=90min On t=30min Off; 1,000hrs

± (2.0%+0.5mΩ)

IEC60115-1 4.25

Solderability

Dipped into solder at 245±5℃ for 3±1s

The covered area >95%

IEC60115-1 4.17

 

Resistance to solder heat

20±1s at 275±5℃

±(1%+0.5mΩ) IEC60115-1 4.18

Substrate bending

Span between fulcrums: 90mm; Bend width: 2mm; Test board:

Glass-epoxy board, Thickness=1.6mm by 10 continuous cycles

±(1%+0.5mΩ) IEC60115-1 4.33

Mechanical shock

a=100G for 11ms, 5 Pulse

±(1%+0.5mΩ) IEC60115-1 4.21

 

Brand

Product Recommendation

Recommend Article