Walter Electronics NANO Chip Fuse2410H Anti Surge Series Selection Model List and Online Purchase: Click on the image to enter
Suzhou Walter Electronics Co., Ltd. is a professional fuse manufacturer. Below is a detailed introduction to the 2410H series NANO patch fuse.
Application scope: Walter Electronics NANO chip fuse 2410H is a fast break fuse suitable for general electronic equipment.
Product code: Walter Electronics NANO SMD Fuse 2410H Product code is as follows:
|
Series Number |
Rated Current |
Rated Voltage |
Approved Symbol |
| 2410H | 5A | 125V | cULs/PSE |
Rated current and rated voltage range: Walter Huade Electronics NANO chip fuse 6125SH：
Rated Current：0.5A~6.3A
Rated Voltage：0.5A~6.3A:250V AC/ 125V DC
Product identification: Walter Electronics NANO chip fuse 2410H has the following identification：
1.
Series type Logo : SH
2.Rated Current (A): A
Appearance and shape: Walter Electronics NANO chip fuse 2410H has the following appearance and shape:
1.Appearances：There shall not be any remarkable stain, rust or crack on the appearances; marking shall be easily legible.
2.Configuration：Surface Mount Fuse.
Engineering drawings and structure: Walter Huade Electronics NANO chip fuse 2410H engineering structure drawings are as follows:
1.Product Engineering Drawing：
|
L(mm) |
W(mm) |
T(mm) |
D(mm) |
|
6.10±0.20 |
2.50±0.20 |
2.50±0.20 |
1.40±0.20 |
2.Product structure:
|
Component |
Material |
Quantity |
|
Cap |
Brass with gold plated |
2 |
|
Body |
Ceramic tube |
1 |
Product features: Walter Huade Electronics NANO SMD fuse 2410H The product features are as follows:
|
Item |
Contain |
Reference standard |
|
Insulation resistance （after opening） |
10,000 ohms minimum |
MIL-STD-202G, Method 302 Test Condition A |
|
Solderability |
T=215℃±5℃, t=3+0/-0.5s, Cover ≧95% |
MIL-STD-202G, Method 208H |
|
Soldering heat resistance |
5 cycles between -65℃/+125℃ 15minutes ; each extreme |△R|:<10% |
MIL-STD-202G, Method 107 Test Condition B |
|
Thermal Shock |
100Gs Peak amplitude，sawtooth wave 6 ms duration，3 cycles XYZ+xyz=18 shocks. |△R|:<10% |
MIL-STD-202G, Method 213 Test Condition 1 |
|
Mechanical Shock |
T=125℃±2℃，96hours T=-55℃±3℃，96hours |R|: <10% |
IEC60068-2-1 / IEC60068-2-2 |
|
High/Low Temperature Storage |
85℃±3℃,80%～90%RH10 cycles |△R|:<10% |
MIL-STD-202, Method 106 |
|
Moisture Resistance |
10-55-10 Hz Sweep in 1 minure，0.03 in.amplitude . 2hours in each of XYZ planes=6hours total. |△R|: <10% |
MIL-STD-202 Method 201（10-55Hz） |
|
Vibration |
5% salt solution ，48hours |△R|: <10% |
MIL-STD-202G,Method 101E, Test Condition B |
Electrical characteristics: Walter Huade Electronics NANO chip fuse 2410H has the following electrical characteristics:
1.Fusing current characteristics:
|
RATED CURRENT |
1 In (Min.) |
1.25 In (Max.) |
2 In (Min.) |
10 1n |
|
|
0.5A~6.3A |
4hrs Min. |
1hrs |
120s |
10ms(Min) |
60ms(Max) |
2.Product specifications:
|
Rated Curren |
Rated Voltage |
Breaking Capacity |
Typical Cold DCR (mΩ) |
Normal I2T** (A2sec) |
| 0.5A |
125V ac / dc |
UL / TUV: 50A@250V AC 50A@125V DC PSE: 50A@125V AC
|
268 | 0.30 |
| 1A |
125V ac / dc |
122 |
3.32 |
|
| 1.25A | 125V ac / dc | 88 |
4.48 |
|
| 1.5A | 125V ac / dc |
73 |
5.11 |
|
| 1.6A | 125V ac / dc |
65 |
6.13 |
|
| 2A | 125V ac / dc |
52 |
6.95 |
|
| 2.5A | 125V ac / dc |
37 |
14.42 |
|
| 3A | 125V ac / dc |
25 |
15.33 |
|
| 3.15A | 125V ac / dc |
23 |
18.12 |
|
| 3.5A |
125V ac / dc |
23 |
18.12 |
|
| 4A |
125V ac / dc |
22 |
22.51 |
|
| 5A |
125V ac / dc |
18 |
26.45 |
|
| 6.3 |
125V ac / dc |
12 |
31.28 |
|
| 6.3 |
125V ac / dc |
8 | 65.50 |
3.CHARACTERISTICS DIAGRAM(I-t)：
4.CHARACTERISTICS DIAGRAM(I2t -t)：
Environmental characteristics: Walter Huade Electronics NANO SMD fuse 2410H Environmental characteristics are as follows:
1.When choosing the fuse’s specification, if the operating environmental temperature beyond the scope from 20~30℃,you should consider the environmental temperature’s affection to fuses.
please refer:
Temperature-Current curve:
2.Storage conditions：
Under airtight in temperature+5℃～30℃、relative humidity 25%～60% can store 2 years.
Without dew in temperature+10℃～60℃、relative humidity be 95% maximum value for 30days.
