Force is a fuse company, involving circuit protection products and solution product portfolio, including fuse, gas discharge tube, positive temperature coefficient device, protection relay, suppressor, transient inhibitory diode array, switch thyristor, transient inhibitory diode and varistors, etc., continuous innovation and provide objective and perfect solution, today it is mainly to let you know a fuse, under the Hnsthop Mall simple explanation.
KLPC series fuse for current in 200 to 6000 amps circuit to provide ideal current protection, KLPC series fuse specification grade structure and performance, can meet the strict project requirements, 99.9% pure silver fuse, silver plated copper end bearing, glass reinforced dense body, tube, end between the O ring seal, and with granular quartz filling, KLPC series fuse is the only UL certified L fuse, can provide minimum ten seconds at 500% rated current, its current limiting characteristics is comparable with the fastest level L fuse on the market. In general, the peak pass current of the KLPC series fuses is 10% lower than other types of delay class L fuses.
The delay characteristics of KLPC series fuse can withstand the surge impact of the system to protect the circuit from damage, and provide the best protection for the system components. The maximum current limit means less damage in the circuit, the damage means that the use of electrical equipment can be quickly restored, reducing the costly downtime, and the equipment can be repaired without replacing the equipment. The KLPC series fuses are maximized with fuses and circuit breakers, both on the line and at the load end. See the Fuse Theory section under this directory for additional information. This can use smaller, cheaper switches, and because the lower rated fuse is better, so it can provide better protection for the equipment, with Littelfuse internal certification of 300,000 amps, standard current, to meet the short circuit current to higher trend.
