WALTE alloy resistors are high quality resistors made of special alloy materials, which are widely used in various electronic devices. Known for their high precision, high stability and excellent heat resistance, these resistors are suitable for a variety of circuit applications.
WALTE alloy resistor STE-C0805/1206 series
Package size:
0805:2.0mm long x 1.25mm wide, is a commonly used package size in miniaturized electronic devices.
1206:3.2mm long x 1.6mm wide, slightly larger than 0805 and suitable for circuits requiring higher power.
Model analysis:
STE: stands for WALTE brand.
C: May represent a series or characteristic of a resistor.
W75/1w: Indicates the power level of the resistor, where W75 may be a WALTE specific identifier and 1W indicates 1 Watt.
R300 / R500 r004 / / 0 0 r015 r030 / / 0 0 r042: said resistor value, the unit for ohm (Ω). For example, R300 represents 300mΩ and 0R004 represents 0.004Ω.
F: May indicate the precision class of the resistance or other specific information.
WALTE alloy resistor STE-C2010/2512 series
Package size:
2010:5.0mm long x 2.5mm wide, suitable for circuits with moderate power requirements.
2512:6.4mm long x 3.2mm wide, it is the largest package size in this series and is suitable for high power applications.
Model analysis:
The model designation is similar to the 0805/1206 series.
C2W: Indicates the characteristics and power level of the resistance.
R500 r008 / / 0 0 r010 r020 / / 0 0 r027 r030 / / 0 0 r040: resistance value.
WALTE alloy resistance product applications
Due to the high precision and high stability of WALTE alloy resistors, they are widely used in many industries, especially in the field of high circuit performance requirements. The following are some typical application industries: for vehicle control systems, sensor circuits, battery management systems, etc., to ensure the stable operation of vehicles in various environments Power management: used as current detection and voltage partial voltage in power conversion circuits to provide accurate current feedback and voltage regulation. WALTE resistors can be used in industrial control systems, robotics, sensor interfaces, etc., to ensure accurate control and stable operation of equipment. In smartphones, tablets, wearables and other products, it is used for battery charging circuits, audio amplifying circuits, etc., and in communication devices such as base stations, routers, switches, etc., for signal processing and power management.
