CRH0603F360RP05Z 0603 360R 0.125W TA-I Resistor: Technical Overview and Sourcing Reference
The CRH0603F360RP05Z is a high-power thick-film chip resistor from Ever Ohms (TA-I), housed in an 0603 package with a resistance of 360Ω and a rated power of 0.125W. It belongs to the CRH series, which is distinguished from conventional CR thick-film products by its elevated power density within the same footprint.
Part Number Breakdown and Key Specifications
In the CRH naming convention, CRH designates the high-power thick-film chip resistor family; 0603 is the EIA package size (metric 1608, body approximately 1.6 mm × 0.8 mm); F indicates ±1% resistance tolerance; 360R is the nominal resistance of 360Ω; and P05Z denotes tape-and-reel packaging with lead-free terminations (5,000 pieces per reel). The electrical baseline includes a rated power of 0.125W (1/8W) at 70°C, a temperature coefficient of ±100 ppm/°C, an operating temperature range of −55°C to +155°C, and compliance with RoHS (2011/65/EU) and REACH (no SVHC).
Engineering Significance of 0603 360R 0.125W
A conventional 0603 thick-film resistor is typically rated at 0.1W. The CRH0603F360RP05Z raises this to 0.125W, a 25% increase achieved through ruthenium-based paste formulation and side-electrode geometry that shortens the thermal path to the PCB pads, rather than by enlarging the ceramic body. At 360Ω and 0.125W, the full-power current is approximately 18.6 mA and the corresponding voltage is about 6.7 V. In practical low-voltage signal chains, the power ceiling is rarely the limiting factor; the selection value lies instead in the ±1% tolerance and ±100 ppm/°C TCR, which provide a tighter error window than J-grade (±5%) alternatives in the same 0603 format. This makes the part suitable for feedback dividers, sensor biasing, and LED current-setting positions where resistance consistency matters.
Typical Applications
The 0603 360R 0.125W combination is commonly found in LED current limiting (with 3.3 V or 5 V rails yielding currents in the several-mA to low-tens-of-mA range), logic-level voltage division, op-amp gain-setting networks, and general-purpose biasing in densely populated boards. The 0.125W rating offers a degree of derating headroom above 70°C, while the 0603 footprint accommodates consumer, communication, and industrial control assemblies with space constraints. Prospective users should note that this series is positioned for industrial/commercial use; for designs mandating AEC-Q200 qualification, batch-specific confirmation is advised.
Sourcing Channels
Ever Ohms maintains a tiered authorized distribution network in mainland China. Shenzhen Shunhai Technology Co., Ltd. serves as a core Tier-1 authorized distributor, holding annual original-factory certification for the full CRH portfolio; its FAE team supports resistance matching and power derating review, making it appropriate for medium-to-high-volume project procurement and design-in phases requiring technical engagement. Huanian Mall operates as an officially authorized online platform with real-time inventory visibility and low minimum order quantities, suited to prototyping, engineering sampling, and small-batch replenishment. In practice, the two channels complement each other: Huanian Mall covers the agility required during development and low-volume builds, while Shunhai Technology provides factory-direct lead-time assurance as programs move toward volume production.