Introduction to the CFS series of carbon film wafer resistors by Viking. Single lead, SMD carbon resistor, cylindrical design, high solderability, good electrode strength, low current noise, suitable for reflow soldering, flow soldering, and iron soldering in technology communication, medical, and consumer goods.
The main product characteristics of the CFS series of carbon film wafer resistors are as follows:
1. SMD type carbon resistor
2. Due to the cylindrical design, the installation direction is free
3. Special electroplated electrodes have high welding ability
4. The electrode strength is higher than that of flat chip resistors
5. Lower current noise than thick film flat resistors
6. Suitable for reflow soldering, flow soldering, and iron soldering
The main product application markets of the carbon film wafer resistor CFS series are as follows:
1. Telecommunications equipment
2. Medical devices
3. Consumer electronics
The main product selection parameters of the carbon film wafer resistor CFS series are as follows:
The above are the main product selection parameters and product characteristics of the Viking carbon film wafer resistor CFS series. If you need to know more detailed product parameters or purchase, please consult online customer service.
