AEM technology with unique film technology and alloy fuse design, research and development and manufacturing of film type fuse, can be called patch fuse, the series of products have ultra low DCR and high bearing surge capacity, T0603FF series is very suitable for application in battery power supply products, such as: laptops, tablets, digital cameras, toys, bluetooth headset and portable electronic devices.
T0603H Tie the fuse introduction
Film patch fuse is a device used for circuit protection, this fuse has the characteristics of small size, often used in the control board as a power supply or signal line overcurrent protection, often defined by DC, individual fuse will add AC voltage and so on. If there is an AC / DC voltage beyond the definition of the specification in the actual application, you can contact the manufacturer for specific communication, through testing and verification, the specification operating voltage of the product with sufficient margin can be increased. The following are the product model parameters, refer to:
T0603H Patch fuse case
The film patch fuse is mainly used in portable equipment, power supply and power converter equipment requiring small size and compact installation position. For example, in the lithium battery protection plate and INVERTER protection, the patch fuse can play a role in protecting the safety of the entire circuit board when the circuit is abnormal. This fuse uses FR 4 as the matrix, copper tin alloy as the fuse, copper nickel tin alloy as the terminal, and the outer layer of liquid photosensitive welding ink, the working temperature is usually to 90 C, for the WIA air wire film, the working temperature can be increased to 125 C.
The above information is for reference only, if you want to know more, you can ask the relevant Hnstshop Mall personnel.
