The Bussman Fuse S520 has global IEC and UL certification in a full range of products, including higher current and high voltage ratings. These products have sleeve and axial lead structure, and higher current, voltage fuse, power and power adapter will public power high voltage AC into low voltage DC, usually used for today's computing, industrial, commercial and consumption load power, because these products connected to high voltage fault current source, overcurrent events may occur, so need to fuse to protect the circuit.
The Bussman fuses use high quality materials and advanced technology to reliably protect the circuit from overcurrent. The fuse has a variety of specifications and models, which can meet the needs of different circuits and applications. When the current in the circuit exceeds the predetermined value, the fuse inside the fuse will overoverheating, thus cutting off the current in the circuit. The fuse is a slender wire with a lower melting point that generates heat when the electric current flows through the fuse and bursts when the heat reaches the temperature of the melting point.
The rated voltage of S520 fuse is 420V, the rated current is 20A, and the size is 5 x 20MM. If the type is not selected properly, it may lead to poor circuit protection effect or potential safety risks. When installing the Bassman fuse, it is necessary to install the circuit correctly according to the instructions or professional guidance. If not installed properly, it may affect the normal use of the fuse and the circuit protection effect. The status and use of the fuse should be checked regularly after a period of time. If abnormal or damage is found, it should be replaced or repaired in time. Try to install the Bassman fuse in the temperature conditions. If the environmental conditions are bad or the temperature is too high or low, it may affect the normal use of the fuse and the protection effect of the circuit.
