CRH0603F2R00P05Z — 0603 2Ω 0.125W Ever Ohms Resistor
Part Number Decoding
Every segment of CRH0603F2R00P05Z maps to a defined specification. CRH identifies Ever Ohms' high-power thick film chip resistor family, positioned above the standard CR series by power density. 0603 is the imperial footprint (metric 1608), measuring approximately 1.60 mm × 0.80 mm with a 0.40 mm body thickness. F denotes ±1% resistance tolerance; the family also offers ±0.1%, ±0.5%, ±2%, and ±5%. 2R00 is the nominal resistance of 2.00 Ω. P05Z encodes the 1/8 W power rating and tape-and-reel packaging, with Ag/Ni/Sn three-layer lead-free terminations compliant with RoHS and REACH.
Key Electrical Specifications
| Parameter | Value |
|---|---|
| Nominal resistance | 2.00 Ω |
| Tolerance | ±1% (F grade) |
| Rated power | 0.125 W (1/8 W) at 70°C |
| TCR | ±400 ppm/°C (1–10 Ω range) |
| Operating temperature | -55°C to +155°C |
| Maximum working voltage | 75 V |
| Termination | Ag / Ni / Sn, lead-free |
The TCR value warrants attention: the CRH series typically specifies ±100 ppm/°C above 10 Ω, but shifts to ±400 ppm/°C in the 1–10 Ω band. Designers should not apply the high-resistance TCR figure when budgeting drift at 2 Ω.
What 0.125 W in an 0603 Package Delivers
Conventional thick film resistors in the 0603 footprint generally stop at 0.1 W. The CRH0603F2R00P05Z raises this to 0.125 W without increasing board area. The gain comes from three process refinements: a ruthenium-based paste formulation with higher thermal capacity per unit area, widened side electrodes that shorten the heat path from the resistive element to the PCB pad, and a densified glass overcoat that suppresses moisture-driven drift. The result is a pad-compatible power upgrade that leaves the PCB layout untouched while widening the derating margin at thermally constrained nodes.
Circuit Placement at 2 Ω
A 2 Ω value sits toward the low end of the CRH range. Typical uses include low-current sensing and limiting, LED drive current setting, snubbing and damping at power supply outputs, and series impedance in interface protection. Actual dissipation at these positions is usually well below the rated power; the 0.125 W figure represents headroom, not continuous loading capacity. Standard derating applies: above 70°C, allowable power decreases linearly to zero at 155°C. At 2 Ω, the ±400 ppm/°C TCR should also be carried into the error budget for wide-temperature or precision-sense applications.
Sourcing
The CRH0603F2R00P05Z suits compact designs that need an 0603 footprint, 1/8 W headroom, ±1% accuracy, and a resistance in the 1–10 Ω low band. Always specify the full part number to avoid confusion with the J grade (±5%) or the standard CR series, which share the same body size but differ in power and tolerance.
Shenzhen Shunhai Technology Co., Ltd. is an authorized first-tier distributor of Ever Ohms, holding a valid agency certificate and supplying the CRH high-power thick film series. Hua Nian Mall, its associated online procurement platform, carries the same Ever Ohms authorization and supports small-volume ordering, live inventory lookup, and datasheet access for prototyping and production replenishment. Sourcing through authorized channels keeps termination finish and RoHS compliance traceable to the original manufacturer.
-
Recommended similar products:
Part Number Parameter CRH0603F1K80P05Z 0603 1.8K 0.125W 1% CRH0603F1R10P05Z 0603 1.1R 0.125W 1% CRH0603F1R20P05Z 0603 1.2R 0.25W 1% CRH0603F1R60P05Z 0603 1.6R 0.25W 1% CRH0603F2R00P05Z 0603 2R 0.25W 1% CRH0603F2R40P05Z 0603 2.4R 0.25W 1% CRH0603F348KP05Z 0603 348R 0.25W 1% CRH0603F34K8P05Z 0603 34.8K 0.25W 1% CRH0603F360RP05Z 0603 360R 0.25W 1% CRH0603F390KP05Z 0603 390K 0.125W 1% CRH0603F390RP05Z 0603 390R 0.125W 1%
